Does anyone make 20 wheels for the XB. I'm tubbing and don't want to wait the 4 to 6 weeks for custom wheels.
Thanks,
Jay

http://www.imagestation.com/picture/sraid102/p9eebcf299572f55a26ebbd4c0100fd71/f9bf79d2.jpg

http://www.scionlife.com/forums/viewtopic.php?t=7772&sid=297024a816001e99d8ca6506d1e6b27b

Does anyone make 20 wheels for the XB. I'm tubbing and don't want to wait the 4 to 6 weeks for custom wheels.
Thanks,
Jay


THE PICTURE MR SCION SENT YOU IS ONE OF OUR XB'S. THE CORRECT RIM
IS A 20X7.5, 8.0 INCH TECHNICALLY WILL NOT FIT!! YOU CAN USE A SPACER
HOWEVER I DO NOT ADVISE THIS BECAUSE YOU LOOSE LUG STUD THREADS.
YOU ALSO HAVE TO MODIFY THE FRONT AND REAR FENDER WELLS FOR A COMPLETE TURN RADIUS. IF IT'S DONE RIGHT YOU CAN USE 1" TRD DROP SPRINGS AND IT WILL BE PERFECT.

THE WHEEL ON THAT XB IN THE PIC IS MADE BY (EDGE). CLICK THE LINK BELOW AND YOU WILL SEE THE X20 TRICK WHEEL.

OTHER 20X7.5 WHEELS

X20 TRICK
TIS 02 (TWENTY INCHES STRONG)
TIS 03
VOLK RACING MAKES A WHEEL (PAINTED SILVER)
KONIG PROPHET NOW IN (CHROME AND PAINTED)


WE HAVE DONE THREE XB'S AT OUR SHOP ALREADY AND WE ARE GETTING READY TO CUT UP OUR NEW RS-1 TO INSTALL 20'S. 1550 OF 2100.

IF YOU NEED HELP PM ME AND WE CAN GET ON THE PHONE.

RANDY