*Vid*, Megan header, s-pipe, Injen cold air and more...
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Hi everybody, I got a request for this video on another board, but I thaught I would post here as well. My current mods are: Injen cold air intake, Megan racing header(new design), s-pipe(from racing solutions), Weapon R engine damper and ground wire kit(from e-bay), my exhaust is stock, but in a week or 2 I will be getting the TRD exhaust and I'll make a video then as well. Oh! I did this with my digital camara, so the sound quality might not be that good and I also an open bumper, so that also makes a difference in sound too. Enjoy:
This first one is from a dead stop, from 1st gear to 4th gear:
http://www.zippyvideos.com/59397112975705/1st_video/
This next one, same thing, 1st to 4th gear:
http://www.zippyvideos.com/139666195975735/2nd_video/
This is what the stock exhaust sounds like when reving while parked:
http://www.zippyvideos.com/75837953975775/exhaust/
This first one is from a dead stop, from 1st gear to 4th gear:
http://www.zippyvideos.com/59397112975705/1st_video/
This next one, same thing, 1st to 4th gear:
http://www.zippyvideos.com/139666195975735/2nd_video/
This is what the stock exhaust sounds like when reving while parked:
http://www.zippyvideos.com/75837953975775/exhaust/
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by ScionTCizzle
I like the sounds and ilike the video. Get one up when you swap out the stock muffler bcuz im dying to see how that setup sounds. good luck
Yea it sounds sick man. i just installed my injen ( black) short ram about 2 hours ago and LOVE the sound that it makes.
Question, is the connector at the throttle body a little too big on yours too? i mean after screwing mine down to nothing it still seems like the intake tube wants to come out and the conector is pinched because of the exess. do you have the same thing?
Question, is the connector at the throttle body a little too big on yours too? i mean after screwing mine down to nothing it still seems like the intake tube wants to come out and the conector is pinched because of the exess. do you have the same thing?
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by Zeroescence
Where is the sound. I cant get it to go.
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by Whocares05050
Yea it sounds sick man. i just installed my injen ( black) short ram about 2 hours ago and LOVE the sound that it makes.
Question, is the connector at the throttle body a little too big on yours too? i mean after screwing mine down to nothing it still seems like the intake tube wants to come out and the conector is pinched because of the exess. do you have the same thing?
Question, is the connector at the throttle body a little too big on yours too? i mean after screwing mine down to nothing it still seems like the intake tube wants to come out and the conector is pinched because of the exess. do you have the same thing?
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by Diluvium
on that 3rd video you can hear a rattle sound... sounds like to metal clapping each other repeatedly... anyone hear it? i think its comin from your S-PIPE....
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by gwtc
Originally Posted by Zeroescence
Where is the sound. I cant get it to go.
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by slammed
what are you fiddiling with after every shift? Also you should look into the CC short throw...
Thread Starter
Joined: Apr 2004
Posts: 2,727
From: Canoga Park CA, SF Valley
Originally Posted by The Instigator
Originally Posted by gwtc
I'm sure I'm not the only one who does weird things when they drive





