We are having a Christmas/Birthday Party on Dec. 10th and an Install Party on the 11th.
That way anybody who wants to come from out of town for the C/B Party can stay the night and be there for the Install Party too. :)

The Christmas party will be the Dirty Santa gift exchange type. The price for gifts will be set at $15 and under. If you do not wish to participate, for whatever reason, you do not have to. But, we would still like you to come.

The Birthday Party is pretty much for everyone who has a Birthday in Dec. Including, but not limited to, Shannon, James and Jaquetta. Gifts for the Birthday people are not encouraged. We do not want everybody to feel obligated to buy gifts for everyone that has a birthday, we are just going to celebrate their birthdays.
Post up if your birthday is in December! :clap:
The party will start around 7:30 PM. We will provide snacks, but you are more than welcome to bring snacks and beverages of your own.

The install party will begin when ever we get out of bed and eat breakfast on Sunday. We will be cooking out on this day. We will provide the meat (I'm good at that... :) ) But, we would like people to bring dry goods such as buns, chips, etc.
Parts to install so far:
Kevin's (Tulsa) lowering springs. (We finally get to lower a tC)
Cathy's (Dallas) new lights.
Hopefully something of mine.
Post up if you have something you would like to install.


This is open to all Scikotics, or potential Scikotics, from everywhere.
And, if it wasn't already obvious, it will be at my house in Broken Arrow, Ok. We have lots of floor space and some bunk beds, couches, etc.

We welcome everyone into our house. :)

Jon and Jaquetta

P.S. As always, we are open to suggestions.

You forgot to mention my birthday on the 17th. :(

if i can get them shipped fast enough, we can install my billet grilles

I didn't forget, it's right up there between Shannon and Jaquetta. :lalala:

Sounds fun. I'll make sure to call and sing to the Bday people! LOL

I'll be their !!

Lisa BDay is the 7th of Dec.
Mines is the 21st of Dec.
and our anniversary ( 19 years ) is on the 30th of Dec.

I'm broke the whole freakin month !! LOL !!

:P since I missed the Halloween party, thought I better make this one!!! :rofl: :rofl: I'll be there with bells on or off, :rofl: :rofl:

You can count Me and Emi there. :clap:

wooot woot.. partys going to be a blast. And Jon, spring compressors from autozone dont work on the rears because there are too many coils. i think we'll have to run to pepboys or something to use a wall compressor.

Anybody else got any input on lowering a tC?

I don't mind running to Pep Boys in needed.

i call the couch in the computer room!!!

It's kinda little, but done!

WAHOO!!! lol im such a dork. cant wait!

Jon, when can i stop by to drop off money for parts?

I'll be here all day.

Thanks for ordering the stuff Jon, I appreciate it.

Ordered right after you left.
Can't beat that free shipping.

We gonna need any tools to rip this Tc apart..I mean lower this nice Tc... :lalala:

i think all we need is a spring compressor and someone that knows what they're doing.. other than that, I think Jon has everything under control no doubt.

:rofl:

:silly:

Spring compressors can be fun. I had pair of compressors, on a spring, "snap" together. Unfortunately I had a flap of forearm skin between them. It took way too long to get out of that one. :P

hey you dont post very much on here. lol did you finally get you xB?

Spring compressors can be fun. I had pair of compressors, on a spring, "snap" together. Unfortunately I had a flap of forearm skin between them. It took way too long to get out of that one. :P
I call jon to use the spring compressor :lalala:

:no: :nope:

I say the person who's car is getting lowered gets to do it.

Spring compressors can be fun. I had pair of compressors, on a spring, "snap" together. Unfortunately I had a flap of forearm skin between them. It took way too long to get out of that one. :P

Did you lose any foreskin....................? :D

ooohhhh thats not right..........

my bday is on Dec 5th. the big 21 :loser: :P

I'd love to go to another install party, not sure if I can get out to this one, though. :cry:

:P You should come up and celebrate. You'll have a place to stay. Cathy is coming from Dallas.

Gerald might be coming too. We'll put up as many as we can but, for those that want a bit more comfort, there is a hotel fairly close.

hhhmmmm...........

actually I think something scary is gonna happen to me that weekend :nails:

must wait and see........

I get the garage couch again, it sleeps pretty nice when you are f#$%ed up :doh:. How much load are on these springs. It must be a whole lot more than an xb if you need a compressor. All I used on my box is a 375 lb guy to push them down. Then zip the nut off with an impact. Speaking of which, do you have a good air compressor? If so I have some pretty good air tools we can use.

I actuallu don't have a compressor.

But, if we can get something to put it in, we are going to borrow Brad's.

Yeah, if anybody has something to haul it in ( truck ) I have an upright compressor on wheels ( craftsman ) that we can use.

if my car is running by then i may be driving it up there and we can load it in my car.lol

I got something to install!


I'm gonna fix my left rear brake light that everone keeps telling me is burnt out.
:silly:

lol its about time!

Thank God!!!! It's about time, need help? :rolling:

I just might. :ponder:

as i replied to the email, if i get it, ill bring my car up with my new exhaust =D

If I can get enough dynamat, I will probably finish doing that up there.

:clap: Matt, you are coming all the way from Florida? Wow!!!! You will love scikotic oklahoma people. Talk about crazy!

He' moving to Houston before the party.

Still Houston is a pretty good drive. :clap:

that i am. i leave friday! hopefully ill have internet by then in houston, or atleast an apartment LOL. if not, ill get ryans number, or one of your numbers.

My number is everywhere on here..........lol.

918-740-5641

If anyone needs directions or my address to map it, just call or PM me.

Btw, we need to start getting a head count for both perties if possible.

Post up if you are planning on coming.

I may try and make it. I will let you know for sure by the end of the week. I ordered a cold air intake this morning so I have toys to play with too.

Cool.

I was thinking of buying some filters, then we could do the cabin filter mod for those that haven't done it. We should be able to do everyone with just a few filters.

That would be cool.

ANYONE HAVE XB FRONT HEADLIGHTS THEY WANNA DONATE TO THE MATT KATAKURA FUND?! OR ILL BUY THEM lol. that way i can come to the install party, and oven the b**tches, and stuff

hhmm, you would think that the censor would change that.
_____
must not catch it with the "es" added to it.
biscuits
....yup

lol

If i can find some factory XB headlights, that will be my thing to install on the 11th. i also want to put my new 22" wheels on!

WHOLY COW some phaaat shoes yous about to put on. pimps baby

ooo im sorry for my b word mistake, i edited it =P

aw, now i guess ill edit mine...
it was a good chuckle while it lasted

haha i dont wanna get the topic locked now

Thanks for editing.


I believe Clay is kidding about the 22's. :silly:

haha, im still waiting for money, so i can order my work rims!

i know how you feel, im still waiting for money so i can order my scion! lol

hahaha. w3rd. money is the evilest thing in the world!!!. i want rims, i want a kit, i want all kindsa goodies. i want a new deck and new speakers. i hope santa is listening...ive been good. sorta

Don't forget Fujiz.com Matt, he carries Work Wheels and we get a discount! :)

oh shnap, i didnt know that. i dont even know how to claim that hehe

yeah... i was kidding about the 22's!

i'm done buying stuff for my B for a while.

I actuall thought about selling it... can you believe that. but then I remembered the few XB's that we getting sold on here for around 18K that were fully decked out, and then i changed my mind.

However.... I do have a 97 AWD Eclipse with a dead battery i might just list on Ebay!

!!!!

all it needs is a new battery!??

IS that the one I'm thinking of Clay?
The one with all the horsepower?

the 200+ hp? :lalala:

More like 400+ if I recall correctly.

Clay how much for the eclipse??

it better be below 10 dollah or ryan no can afford hahaha

LMAO not always true

TRUEEE!!! hahahaha

hey you dont post very much on here. lol did you finally get you xB?

Yeppers. Actually, it was sitting at my house on halloween, but could not get hand controls installed until the following Tuesday. She now has a little over 1500 miles and I'm pleased as can be. I'll make the install party and do hope to secure some couch real estate. However, I'll drink less this time so I might be able to remember everything. Odd visions of stroking an ostrich are still haunting me. :silly:

BTW, no I didn't lose any foreskin due to the spring compressors.... It was a cool injury though as it looked like a snake bite where the springs touched together on each side of a fold of skin.

I should be making it out there. Just trying to get my work to finalize my day off. Can't wait to meet everyone up there.

Odd visions of stroking an ostrich are still haunting me. :silly:

:rofl: :rofl:

:pray: :pray: hope I can reserve a couch, will be tired after all that dancing!!! :rofl: :rofl: :lol: :lol: :!: :!: Now have a CAI to install in the itty bitty xA!, and just trying to get the remote on the lights to work :question: I CAN'T WAIT!!!

Don't know if anybody is doing any electrical work. I might be able to steal some good heatshrink from work. I also have some pretty good electrical tools if we need them. Also let me know if anybody needs any wire loom. I can get that stuff for "free" as well.

Grab it, hopefully I will have some eletronic stuff to install as well.

will do

Hey Clay !! I've got my factory light for sale as well as my Halo's..I found a differnt set I want !!!

Do you have the chrome or black halos?

Black....

if you have halos now, you looking to get rid of your stock headlights? =P =D

i wish i could join u guys but its practically impossible. post pics so we can see what fun we missed out on..NOT seriously though i wanna see some pics

count me in... i will be rolling in the stock ___ xb

Both parties or just the install party Jarrod?

I don't i'll be able to go to the christmas party, I have ACT's in the morning and i'll probably need to get all my school work done before friday. What time should I be over in the morning?

I'm sure most people wil be up by 9 or 10, I can't sleep past 7 or so myself........lol.

I'll be there. My wife said I could go play and have a weekend to myself. I'll be there for both parties. I will see you guys and gals then. I will also need directions, so if you could e-mail it to me Jon.

How many of you DFW peeps are coming? Cathy knows how to get here, maybe you could convoy.

I'll have the boss PM you some directions. :)

Wow I am so impressed with the outa state interest. TX you guys get so much Oklahoma love!!!!! Makes me anticiapate TX car shows even more i.e. HEATWAVE..... Its like its my very own christmas and all I wanted was to hang out with my friends and have a blast!! I cant wait... I love the Scikotic people. They make this club. (SCIKOTICS are the friendliest people on the road today!) Much Scikotics Love!!! And good will towards men! lol

count me in... i will be rolling in the stock butt xb

Same. I'll probably just bring some cleaning supplies for my stuff and ...uh.. "supervise" elsewhere


:P

Currently working on modifying the fog lamp hole for forced air. Hopefully have it done to show off. No promises though.

I've been wanting to do that too.


Everyone clear on the Dirty Santa gift exchange part of the party?

I've been wanting to do that too.


Everyone clear on the Dirty Santa gift exchange part of the party?

What are you talking about?

i will probably come to both.. no use making the 3 hour drive home so early

It said in the first post that it was a Dirty Santa gift exchange. :silly:

Dirty Santa gift exchange is where you bring a wrapped present (no more than $15 in cost) and you can't tell anyone whats in it. Then we will draw numbers to see who gets to go first. The first person picks a present and opens it in front of everyone else. #2 can then either pick an unwrapped present or steal #1's present. If #2 steals #1's present, #1 can then pick a new present. Each present can be stolen twice. But, you cannot immediatley steal the present back in the same turn.
It is generally very fun, especially when people bring unusual gifts. :wink:

Ok Jon...I ordered the lights about 10 minutes ago..they said in an e-mail 2 to 5 days for delivery !! :clap:

Woohoo!

Might have them by the install party. :)

Me and megan are thinking of going however we are still unsure (based on work) I need help :pray: :pray: with a set of tanabe springs and rolling my fenders. I can bring a jack, some stands, a creeper, and my toolbox. Hopefully the weather is ok going up there.

What is the quickest way to Broken Arrow/Tulsa. 75 or 35/44?

Big_vdub pleease :pray: :pray: bring some red split wire loom if possible.

wow, this things gonna be big! You think your neighbors are going to be a little ticked? LOL I have a feeling that its going to be wickedly cold, so everyone bring lots of warm cloths and gloves

lol it will look like a scion car dealership in his neighborhood. lol

Me and megan are thinking of going however we are still unsure (based on work) I need help :pray: :pray: with a set of tanabe springs and rolling my fenders. I can bring a jack, some stands, a creeper, and my toolbox. Hopefully the weather is ok going up there.

What is the quickest way to Broken Arrow/Tulsa. 75 or 35/44?

Big_vdub pleease :pray: :pray: bring some red split wire loom if possible.

If you are actually in Dallas the quickest way is to take 75 through Sherman.

People might want to bring sleeping bags and blow-up mattresses if you have them. We're already down to floor space........lol.

We have about 8 parking places at the neighborhood pool around the corner if we need them, we'll be fine on parking.

I have a fairly large garage heater that I need to dig out, but ya, we will need some warm clothing.

We might end up having to install some stuff on Saturday too, so the Dallas peeps don't get home to late. Any volunteers to come over Sat. afternoon and start installing stuff? I can be off work by 2:30 at the latest, possibly earlier if needed.

This is going to be fun. :)

I'll help however I can. If nothing else I am an extra pair of hands.

Sometimes that's all you need.


Guess I will have to go organize my limited supply of tools this week. :doh:

*mess up*

me and crystal are hitchin a ride with Cathy so we will be up there early and im pretty good with my hands so i can help whom ever. im really good at taking things apart and putting them back together. lol i will do free oil changes if thats all thats needed. Will work for food and alcohol!!

Hey, while your joking around about oil changes I actually need one. :)

So does Jaquetta. :D

just provide me with oil and filters and tools plus a drain pan ill do both since your putting a roof over my head for the night. :)

whatmovesu wrote:Big_vdub pleease bring some red split wire loom if possible
Unfortunately all I can get is black wire loom. I can get alot of different sizes, but only black. Sorry

That is fine Vdub I can pick some up at pep boys thanks anyways, I'll also bring caliper paint (dupli color I have red,blue, and black) if anyone want try to paint their caliper. I think it might be too cold but if anyone wants to try.

Just hope it doesn't snow that weekend :nails:

Oh yeah ya don't have to worry about putting us up (though it is much appreciated) we will be crashing at the Holiday Iiiiiiiiiinnnnnnn.

:pray: I hope it is good weather. It is supposed to snow here on Wednesday and maybe Thursday. But hey, this is Oklahoma, the snow will be gone by Friday. We usually warm up right after a snow. The forecast so far is dry and a high of 45 on Sunday -- not too bad if it is sunny.

Wow I am so impressed with the outa state interest. TX you guys get so much Oklahoma love!!!!! Makes me anticiapate TX car shows even more i.e. HEATWAVE..... Its like its my very own christmas and all I wanted was to hang out with my friends and have a blast!! I cant wait... I love the Scikotic people. They make this club. (SCIKOTICS are the friendliest people on the road today!) Much Scikotics Love!!! And good will towards men! lol
:bow: Well all you OK peeps made this (little?) TX girl feel so welcome when I first met ya all at Tunerfest, no wonder we all want to get together, just wish ya was around the corner! :love:
Man I can't wait, am countin down the days!! Going to bring some goodies for the party, so hope your hungry! :D Gee did I hear Laffy Taffy??hehehe :P :rofl: :rofl:

BTW When I was at the Garden of Angels "stuff your scion" event this weekend stick 1NZ introduced me to a member of the Squid Racing Team aka Dallas police officer who looked at my lights and said that the ones along my the side of my car are TOO VISIBLE :no: , so I may need to have to have them moved in a little bit. :lalala: :lalala: AND I will have an extra set of multi colored light kit if anyone is interested for their ride for a decent price :lalala: :lalala:

^^^^look at the pretty lights, no dont stare into the light, no no dont do it, nooooooooooooo zzzzzaaaapppp!!!!!!

BTW I will have an extra set of multi colored light kit if anyone is interested for their ride for a decent price :lalala: :lalala:
How much are we talking about, and what does the kit consist of?

ill start the bidding at $2...

I have $2.50

:rofl: You guys are hilarious! I can't wait for this weekend -- one huge slumber party.

Someone bring a copy of Laffy Taffy -- we gotta see Cathy do her thing. :P

I just put some christmas lights up outside, and i realized something. It's not going to be fun working in the cold. :doh: :doh: :doh:

I'm working on going. Maybe even early Sat. My Bride never said No, and that's a good start :nails:
How's that Howie Jonson on east 41st ? orbitz has rooms for $27.00. Is it one of those sleep with the window open Glock in hand kind of a motel?

Sounds like sleep space will be standing room only at your place Jon :P and I take up a lot of room.

I have skinless spring compressors :rofl:

Rob :P

41st and what?

If it 8525 E. 41st it shouldnt be too bad, but its about 20 minutes from my house. But, for that price I would say it's worth it. :)

And, it's not like you don't sleep with your Glock anyway. :silly:

Ya, thats the one That place or motel 6 on Garnette is $34.00
And, it's not like you don't sleep with your Glock anyway
:lalala:

We gonna cruise any Sat night?

I doubt it, seems we like we will be pretty busy.........lol.

The motel 6 on Garnett is about 1/4 mile from my house..wish I had some extra room for somebody but we will have company that weekend also..but.. I will still be at the Xmas and install party..but I will need a date !! LOL !!

So Jon, whats the plan for saturday with the installs?

We are starting on yours. You and I will be doing most of the work ourselves on Sat. unless someone else shows up to help out. :lalala:

If i can come it will be early Saturday. So I can help.
Whats the weather looking like :pray: Warm & sunny lol

Warm? :rofl:

I'll be there saturday around 1 or 2 if the weather permits. So I will help any way I can.

Awesome. :clap:

I'll try to get off work around noon.
Hopefully the roads will be good. Right now it is very white outside. :shock:

Wow, snow in my tC sucks. I was slipping going in 3rd gear. But does anyone have a spring compressor i can barrow? The ones from autozone dont work on my rear springs because it has too many coils. I was planning on going to pep boys to have them use the wall compressor but they said 30 bucks per spring.

I have most of an old diesel mechanics set so its a pretty good variety of tools. I can show up at noon Saturday and bring one case and and a small ammo can of stuff. As long as it does not require standing, I'm willing to help with whatever needs to be done. Need a set of ramps or a pair of jack stands? Also, what is the address again and can you PM with some food or eating supplies to bring.

The highways are fine. There is still snow on our neighborhood streets but it will be gone by tomorrow. Your drive here should be smooth.
The weather forecast for Saturday and Sunday is sunny and low 50s by afternoon. That will be awesome.

Now thats a hot weather girl. :wink:

DAMN she should be on the news as the weather girl. i would watch the news more often

Btw, the Dirty Santa gift thing is just a name. It doesn't have to be "dirty".

Although, it can be. :lalala:

Been trying to figure out a gift that could be for male or female. Dirty or Not!

HEY JON !! Lights came in today !!!!! :clap:

I will try and get there early as well. I have to wait for fedex to show up before I leave. Bought a header. We'll see if does anything for me.

Anyone have a spring compressor and can be at Jons on saturday? I'm not sure how i'm going to get the rear springs on because the ones at autozone dont work for the rears. I don't have the cash to pay 30 a pop for the rear to be compressed at pepboys. HELP FELLAS!!!

We'll figure something out Big Kev.

Hopefully. :nails:

Okay, everything is a go so I will see everyone tomorrow afternoon. Me and Kenneth are heading out around 6am and will be there after we check in at hotels and stuff.

:relief: been busy being Betty "damn" Crocker today :relief: , hope ya enjoy the goodies I'm bring'n!, hope that hot weather girl goes outside, smiles, and makes the damn snow melt! HEHEHE, that's why I moved to TEXAS!!
Vaughn, sorry I did not get back to you about the lights, they are generic multi colored, not a name brand, :ponder: thinking $75 you can see tomorrow
Well dudes I am off to the showers and the sack, see ya all tomorrow, can't wait!!

I can't wait to see everyone. :clap:

I should not have a problem being off work by noon, but if I do my lovely weather girl will be here. :)

If anyone has spring compressors, bring 'em. If everyone that has a set will bring them I'm sure we can make something work.

Jon, once you're availiable to start, give me an instant message or call at 852-9796

Vaughn, sorry I did not get back to you about the lights, they are generic multi colored, not a name brand, :ponder: thinking $75 you can see tomorrow
Sounds good I will check them out this afternoon

If anyone has spring compressors, bring 'em.
Have a set, what else?
Was thinking of bringing my stuff to install LED's Solder stuf, cordless drill .wire.

If anyone wants to light up drink holders or whatever let me know and pick up some LED's.
I'm heading out around noon :clap:

Fair warning, I'm stealing back my dirty santa gift :rofl:

Rob

Just bring anything you think you might need. :)

Im running a little behind. I should show up with the buns around 3:30.

We're halfway through lowering the tC.

Spring compressor? We don't need no stinking spring sompresssor.

LOL i sure as hell didnt need a spring compressor when i did mine. USED MY WEIGHT! lol!

xB's are a bit different when it comes to lowering than tC's.
Much easier.

But, we're done now. :relief:

haha that, and i h ad really soft springs, so i could just put my weight on it to compress it for the fronts.

Thanks guys for all the help, i appreciate it!, and yes.. i made it home in one peice! well i should say.. the car did.. hahaha

Big Kev's tC looks awesome lowered.

Let's see, one tC lowered, one xB lowered, 3 headlight switchouts, one HID install, one cold air intake install, and 2 underbody led installs. :relief:
Not too shabby for one weekend.

Oh yeah, we had a Christmas party too.
And, my wife put together 3 huge meals in one weekend. :bow:

Thanks for coming everyone, we loved having you. :clap:

And we fixed my brake light. :wink:

The HIDs look pretty good jon? Take some pics of the cutoff.. if there is one...

:P Thanks to everyone for coming. It was a great weekend. A special thanks to all of those people that drove the distance to party with us.

New Year's Eve is next. Hope everyone can make it.

The HIDs look pretty good jon? Take some pics of the cutoff.. if there is one...

They look awesome, great cutoff line.
I'll take pics tomorrow, I'm worn out........lol.

thanks to everybody that showed up....it was a blast!!!! had tons of fun. oh and just to let everybody know Brideoffrankenscion is the best cook out there!!!!

Many thanks to you and your wife for everything you've done for us!! Even though I was only there for a few hours today, I still love just being around everyone and all they bring to the table!!

Everyone worked hard getting things installed this weekend but I'd have to say Vaughn really had the golden skills, and never complained either, even with me givin' him sh!t too!!! He stayed cool as a cucumber..... :rofl:

The party was a lot of fun. It was nice to meet some more people I hadn't met before. Hope to see a lot of you again for New Year's? How 'bout it Jon? I promise I'll try not to get sick this year! :wink:

I had a great time . Thanks to Jon and Jaquetta for your hospitality once again. Also thanks to Jon and Shannon for hooking up my underbody lights. God knows I would have been way too lazy to do it. My header arrived about twenty minutes after I left to go up there. I will put that on tomorrow I guess. Can't wait for New Year's. I don't think an install party would be a good idea on that sunday though :silly:

Also it was very nice meeting everybody. i hope everybody made home safe and without problems.

had fun... thanks for the hospitality .. even ended up with new headlights... thanks again and cant wait until we meet again

yeah an instal party wouldnt be good for the newyears. i know i was to hungover to really want to work on anything this time. gotta have a new years eve party Jon! you know that me and crystal will be there, and so will probably most of the oklahoma crews.

:bow: :bow: to Jon and Shannon for all your hard work istalling my lights, I hit 'em on as soon as I hit Dallas! and was being a showoff all the way across town!! Too bad about the CAI, I will either scrap the idea or contact Japan!! and maybe contact the guy I purchased from and tell him xB CAI- DO NOT FIT xA's!!!
:clap: :clap: So nice to meet ya some of you for the first time, and so glad to catch up with my old buddies!! Hope to see ya all again soon.....
:rofl: :rofl: Seems my Laffy Taffy performance was only viewed by a couple of ya, sorry for the visual, hehehehe :rofl: :rofl: for some reason the gift exchange wore me out!! :lalala: :lalala:
Happy Holidays to you all!!

I had a good time playing pass the phone!!! LOL

I forgot to mention that Vaughn also completely rewired Brandon's ECU, shrinkwrap and all. :clap:

How's that SC running now Brandon?


New Year's Eve party is a go, but this past weekend was our last double party weekend.......lol.
We're just getting too old for this sh1t...... :rofl:

hey i wanna see pics!! we had our own lil install party.. the guys installed lowering springs to her tc, we painted out engine covers we had a little shop in her driveway it was kool we had some onlookers but i wished i would've made it out there with u guys

Thanks to Jon and Jaquetta for their kind hospitality. Thanks to the rest of the scikotics for their help and information I learned a lot this weekend :bow: . You just don't know how happy I am to have made this trip (First weekend trip since I've gotten ill). My xB looks awesome lowered however when I got home the rear is squeaking or rattling a bit I hope it is nothing serious :pray: I already recieve several compliments. Can't wait to see the HID's I bet they look good.

I had a good time playing pass the phone!!! LOL

:rofl: Jyl, we have several pics of people drinking with you. Too bad you couldn't make it. It just wasn't the same as having you here.

Pics!

First the pics for Jyl:
http://i14.photobucket.com/albums/a305/FrankenScion/100_0671.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0653.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0652.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0651.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0650.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0649.jpg

Some of us were under cars most of the time.

And I think the photographer got a little typsy before she finished. :wink:

And now the others:
http://i14.photobucket.com/albums/a305/FrankenScion/100_0679.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0678.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0677.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0676.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0675.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0674.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0668.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0667.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0666.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0663.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0662.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0661.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0660.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0657.jpg
http://i14.photobucket.com/albums/a305/FrankenScion/100_0658.jpg

And, my HID's :)
http://i14.photobucket.com/albums/a305/FrankenScion/100_0681.jpg

And I almost forgot to thank Chad for bringing me enough Fat Tire to last at least until New Year's Eve. :P

And the Chub City xB that I'm getting ready to open.
Thank you very much Chad :bow:

Sorry I didn't post sooner. I had a great time this weekend hanging out with everyone.Thanks Jon and Jaquetta for letting us in to your home. The beer was the least I could do after all ya'll did for us. Thanks again see ya soon.

great pics.. wish i could have made it out guys. maybe next time!

Haha!! Those pics are hilarious!!! Thanks guys!

The HIDs look like they are bright as f@(k. That cutoff line looks awesome. :clap: See you guys in a couple or three weeks

Watching them power up is pretty cool too. :)

Both parties were GREAT !! Thanks Jon & Jaquetta for the sacrafice of the house for everybody !! I had a great time meeting some of the new scikotics and getting together with the ones that I already knew.
A great big thanks to Vaughn for his wiring skills on the install of my new headlights !! Went to the paint shop yesterday and they have some ideas for the paint on them..just waiting on the OD grill I got to come in..... :nails:

Later all !!

wish i could have been there, it'll be different when i get my new job, but for now i'm working my tail off to stay afloat. looks like everyone had a good time.

hey Kathy what ya doing to the XA?? I saw the guys under there..

We put some new underbody lights on. The old ones stuck out too far and they weren't remote control like they were supposed to be.

hey Kathy what ya doing to the XA?? I saw the guys under there..
LOVE MY LIGHTS!! every nite when I get off work I have to show off, and run with them ON , on my way home! :P
Had a CAI, but it would not fit :tap: , but if I do get another, I may have to order it from Japan!! :tap:

Girl look at u let me catch up..i'm getting my underbody led lites and interior ones next mnth. i want to do so much but my budget says otherwise well atleast for now..

Jon & Jaquetta are the greatest :clap: What a party. Great food, Great time :bow:
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08580.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08565.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08578.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08563.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08586.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08593.jpg
http://i9.photobucket.com/albums/a91/Scion4Rob/DSC08600.jpg
Met some way cool new people.
We are going to have a great summer hangin out. 8) Can't wait

Thanks again

Rob

Great pics Rob!

:clap: :clap:

Anybody else got some pics?