Just to let everyone know that Nishimura "Nish" Designs has some products available now for the xB.

Currently in the line up are carbon fiber dash trims, door pillar trim, door sills. engine bay dress up and front splitters (several designs will be available)

All parts are made of high quality carbon fiber and comes in different finishes such as silver carbon fiber, tinted blue, burgundy, camo green carbon fiber (Carbon Kevlar will be available soon)

The parts will be available at the Team Scion West meet at Cerritos this sunday.
Parts can be shipped as well.

Prices are pending right now and will be posted soon. They will be significantly cheaper than the dealer etc.

Here are some pictures of the products (the pictures where taken tonight and it is extremely foggy outside so I apologize if the pictures are not as clear)

If you would like to order parts and would like to inquire about them, PM or email me.

http://www.imagestation.com/picture/sraid85/p1ff70cb82db5b4482920b017975dc27c/fabdd5e2.jpg
http://www.imagestation.com/picture/sraid85/pbb5de55f643ca4c89f427ef22fdcb128/fabdd58c.jpg
http://www.imagestation.com/picture/sraid85/pd2e618e944a25fcb12df09edb10c53cb/fabdd4df.jpg
Dash trim

http://www.imagestation.com/picture/sraid85/pd81de92bae3c55865117fdf69071ea7c/fabdd540.jpg
Door sills

http://www.imagestation.com/picture/sraid85/p569ea47cb7b27a7bdcfbe18e5756fcce/fabdd477.jpg
Door pillar trim

http://www.imagestation.com/picture/sraid85/pa5a29562116cf22c901996318414d705/fabdd414.jpg
Front splitter

do you know if they are going to make an engine cover? i would love to have a carbon kevlar one for my xb when i get it

do you know if they are going to make an engine cover? i would love to have a carbon kevlar one for my xb when i get it

I don't think they will be making one..there is another company that should have one in a couple of weeks...once it comes in, I'll take pictures and post it as well as see if we can get a group buy or something.

Hey adrian i want on list for front splitter how soon can i get a price
thanks usdmbb

Hey adrian i want on list for front splitter how soon can i get a price
thanks usdmbb


I'll try to get you a price today. What finish do you want. Classic Carbon Fiber, you want it tinted or silver carbon fiber?

Let me know.

cool beans. I totally dig the placement of the gauges. I think i ll have to throw some in there just to fill in the dash :)

Whats the cost on the front splitter?

Thanks

Cant wait to see your car tomorrow. That silver really match the polar white i cant wait to get that front splitter, looks really nice Nilo.

A lot of folks PM'd me for the splitter. I will find out the cost tomorrow at the meet and I will post it here or PM you guys back..

Thanks for the inquiries..I'll try to get back to you ASAP.

that splitter looks really nice. better then having a straight line across.

very interested in some parts. I pm'd you, please respond. Thanks.

Just responded. I have a meeting today with Nish Designs and I will have prices posted here soon. Introductory promo and group buy prices are in the works.

I'll post here asap once I get all the information.

can you ask the company about doing products for a matrix if there is interest?

sure...he might need a car to work on..If he wants to do it then we will need someone to help do a test fit etc...

Hey what's up everyone, thanks for the great interest in the new products comming out by Nish Designs. The items look great and are of great quality. Adriane and I will be meeting with Gary today to get you guys the prices on all the items shown.

thanks again.

I'm really feelin' the front splitter in carbon fiber... I wonder if they have another splitter with both sides rolled up similar to the ones from the Bimmer camp.

Hey roger show me a picture of the splitter design you want and I can show it to them to see if they can do one. I'll be taking to them tonight.

I think these are the ones that Roger is thinking about! It's the BMW splitter with side canards. Link attatched:

http://www.twisteddynamics.8m.com/universal.html

If those are the ones, they look pretty cool on the bimmer to square the front off on it. but the xb is already pretty square in the front, but I will bring it up to them and see what they can do. It might look pretty trick on the xa. I'll let you know, thanks for the input.

opps sorry, by the way thanks for the images Scionjohn.

opps sorry, by the way thanks for the images Scionjohn.

Your welcome! Roger and I was wondering if those would look nice if they joined together as 1-piece splitters with a little lip in front , instead of being in 2-pieces. It would leave a little slit opening on the bottom of the bumper. Good luck with the prototypes and hope to see pictures soon....

I spoke with Nish the other day and they are designing carbon canards for the xb soon maybe after sema.

great..canards... "xB...now with wings" =P

i want the front splitter.....how much!

I want the front splitter in CF also!

squirrel

me 3...group buy in the works =)

hey what's up everybody, PM me or Adrianne(scionla) for the prices on the splitter and other carbon fiber pieces. We have 2 styles now we will post the new pics on the G2 soon. it comes out a little bit more that the G1 splitter shown. We've gotton alot of positive feedback on the xb splitters and are now working on one for the xa. Hope to hear from you guys soon. Thanks again.

Can't wait to see the G2 carbon fiber Splitter....

My xB needs some fiber!!!!.... :D

any word on prices yet?

Parts look great! Extremely clean design and quality. Can't get better from anywhere for the price!

-Steve

Any pics on the G2 Splitter yet? How much does it cost? Please PM me.

the splitter looks great and I'm interested in it, what's the pricing?
thanks,
dchan8

the splitter looks great and I'm interested in it, what's the pricing?
pm me please :)
thanks,
dchan8

the splitter looks great and I'm interested in it, what's the pricing?
pm me please :)
thanks,
dchan8

I'll be posting soon and Scion Sport Tuning site will be updated with prices.

Splitter should be around $250 and up depending on the materials and finish used.
We are working on getting better pricing on the carbon fiber so we can pass the savings on to you guys.

We will also run some promos to get more products out there.

You guys swhould really make the radio bezel. I know I would buy one.

http://www.mattguillory.com/bB_Yahoo_Japan/CF_Center_Console_00.jpg

That's in the worls..I know another company is doing this as well..

bBist was going to order some of those before but as you know that bezel is different from the US model.

I just dont think 250 is anywhere near reasonable for that piece. You should see the carbon fiber radiator plate i got for my s2k which is real carbon that was under 150 bux. Hope that is "LIST" price

yup, i was told two fiddy also.

i thought it would be around 175 or less myself. especially since the majority of it is flat w/ a curved front lip. i should see if one of my friends, who's a fabricator, can do it for me. he does all kinds of fibreglass and CF stuff for race cars and planes.

squirrel

i got my G2 splitter today. thank you Gary and Nilo(xBboy) for hooking me up.

front splitter pics:
http://www.imagestation.com/album/?id=4288525485

What ever happenned to this thread?
What is Nish designs website?
Interested in a splitter but cant seem to find it!
Thanks!

Go to wwww.scionsporttuning.com
The site will be udated soon with more pictures and other products.

Sorry about the delays with SST, we have been so busy with other things.

I am shopping online right now and see no precision products! :lol: J/K Looks good, still searching.

What ever happenned to this thread?
What is Nish designs website?
Interested in a splitter but cant seem to find it!
Thanks!

Nish Designs website will be up real soon, i'll post up when it's ready to go.

It will have all of Nish Designs products, ordering info, pictures all that good stuff :)

- Brian

The site will be complete soon... as Brian has stated. Gary was in great dire need of a website..and i'm glad that Brian took the torch to buy the domain and get the website going. Great job Brian...

Please contact Nilo (XBBOY) or Adrian (Scioninla) to request more info about Nish's products and services.

Nish site will be an informative/manufacturer site with products and service listing. Pricing will be available through SST i believe...so contact Nilo and Adrian.