ZPIracing is proud to announce the Pre-release of there now motor mount kit for the Scion tC. These will be a full polyurethane mount insert that will result in 75% less travel of the engine under acceleration. Keeping it polyurethane also will allow the mount to absorb the vibration at idle to keep the cabin rattle free.

This is a must have for you turbo and supercharged cars while great results will be seen in the N/A cars with bolt on modifications to stock platforms. This will eliminate the dreaded tire hope that is commonly found in the tC platform.

We said that we where not going to do a pre-order after the turbo kits but we found ourselves in a position where we need to. We had to order an initial 1000 mounts to have these made to our design. So to make sure that we are not stuck with all of these at time of arrival we will make some pre-order pricing to help take some of the excessive inventory right off the bat.

We are promised delivery January 15th so we are going to promise delivery to you February 15th as we see no reason as to why there will be any delay but nothing exceeding 30 days. All of these will ship together no batches as we will take delivery on them at one time.

We will offer these at a pre-order price of $95 and a retail price of $165.00

 

Are these motor mounts easy to install? Does it require to pull the engine?

 

no you will need to press the old ones out and install the new ones. You will have to remove the mount not the engine

 

Damn, too bad you have to get 1000 of em, you should sell some where you have them already pressed in and charge a core charge. Alot of people will have no idea what do with them.

 

Ive read about motor but i have no idea where they are on the car or how to install them. So an explanation of install would help me decide (Ill probably get them anyway but the more info the better). I can always get my friend to help me who is rebuilding a 70's fastback.

 

yes we will have a installation page on our tech section closer to ship time. These can be installed in under an hour and any local machine/repair shop can press them in and out very cheap

 

sold, where do i pre-order?

 

yeah, where can i pre-order? and how many mounts is it, 2?

 

Duplicate Question as FI forum....

Please let us know what hardness (On the scale) they are...

Inquiring minds want to know....

 

where can we buy?

 

Im very interested as I am going turbo this coming spring ... when does the preorder price end?

-Dan

 

Were do i sign up

 

yes please let me know where to sign up for these

 

oh! eventho i'm broke, i gotta get a set, it's a must

 

I'll take a set! Where do we order?

 

iS THIS FOR 4 MOUNTS?

 

when do you need cash for these ill be able to pay on the 13th or i could pay actualy today but im trying to get your underdrive pully so i can break in to the 14's on the 1'st of january unless you want to cut me a deal so i can order both right now ;) lol

 

QUESTION:

Still a little new to the mods dealing under the hood.....so what is the difference between this and a damper...i am under the assumption that this would be better then a damper.....but what is the realiablity of this (Life Expectancy)
Any way we can get a pic of what they will be replacing and what they look like???
I am very interested in this and would love some more info and what the difficultly would be of switching these out as a DIY....Also would any other mods conflict with the placement....just curious

Thanks
~Jason

 

posting to keep posted... just was about to order flexane 80, so great timing ;)

 

Need to know:

1) Stiffness (scale)
2) How many mounts are these inserts for? (1, 2, 3, 4...)
3) Where to order...on the website?
4) Who is making these?

Thank you...