stankubrick
01-09-2006, 07:55 PM
Hey guys, just got some camber plates and and camber shims....can anybody help me install these in or around the Fremont area? PM me :pray:
|
View Full Version : need install help, please squirrel 01-09-2006, 11:02 PM Hey guys, just got some camber plates and and camber shims....can anybody help me install these in or around the Fremont area? PM me :pray: Rico, get in touch w/ Mark. I would come out there w/ my tools, ramps, jack, and jack stand, but my arm isn't ready fro that yet. -Keith- 01-10-2006, 02:08 AM Benicia..... stankubrick 01-10-2006, 05:03 AM Keith, I'm definitely gonna have to check out your shop in the near future! Thanks Brad, rest up that arm! I'll give Mark a call.... -Keith- 01-10-2006, 06:26 PM sounds good... 01-12-2006, 12:43 AM Pm received and sent back brother. :D I highly recomend alignment to be done after. crayonBOX 01-12-2006, 08:16 AM if you're in the area rico :) i would definatley help out feelin like a road trip? ive got all the tools 01-12-2006, 03:45 PM The godfather helps again! :D squirrel 01-12-2006, 05:05 PM Keith, I'm definitely gonna have to check out your shop in the near future! Thanks Brad, rest up that arm! I'll give Mark a call.... Rico, Mark had to leave for a bit. If need be, I can come out there and help. I still have one good arm! Dewmerz 01-12-2006, 06:01 PM Rico does the Blitz suspension use the top plate off of the stock struts or does it come with it's own? If it uses the stock one they should bolt right up. My Tein Basics were supposed to use the stock top plate and a few parts but because I had the Cusco's I was able to put everything together without having to use any parts off of the stock setup. Make sure you get a alignment after they are put on. even with them set at 0 the alignment rack showed -1.4 on one side and -1.1 on the other. Auto Innovations charges a little more if they have to adjust the camber plates but it is worth it to make sure they are actually set where you want them to be. stankubrick 01-13-2006, 07:01 PM My schedule filled up all of a sudden, and I'm gonna have to wait to install everything in a week or so... Thanks for the tip Brian, I'm definietly gonna go to AI for the alignment. Haha Brad, I know you would wanna help out even with 2 bad arms! Thanks Tesh for the offer too, i might take you up on that if I am ever up in Sac.... Gabe, got your PM thanks! 01-13-2006, 07:14 PM PMed ya back brother. Hope everything can be worked out by this saturday. :D squirrel 01-14-2006, 05:53 PM Haha Brad, I know you would wanna help out even with 2 bad arms! I figure why pay someone when you can get the same service cheaper or for free! stankubrick 01-14-2006, 06:07 PM Yup, I'm trying to save $$ at every opportunity....doesn't help that this happened either: http://www.scionlife.com/forums/viewtopic.php?t=101273&highlight= :( squirrel 01-14-2006, 06:11 PM OUCH Rico! Sorry to hear this! 01-16-2006, 04:19 AM Rico, I hope that you were able to get a hold of someone at Car Care Autobody. If not call them on Monday, Wille will be there. :D stankubrick 01-16-2006, 04:23 AM Yeah, I talked to Willie, he's a cool dude. I'll find out Monday if it's a total loss or not. At this point, we're hoping it is a total loss, then maybe my gf can get an xA :) 01-16-2006, 04:36 AM Yeah, I talked to Willie, he's a cool dude. I'll find out Monday if it's a total loss or not. At this point, we're hoping it is a total loss, then maybe my gf can get an xA :) That sucks man, yeah willie is hella cool. He is a great guy and has been a friend of my father for the longest time! :D I hope things work out and you get what you want. hee hee |
|