I got a pair of halo headlights off of Ebay and they look awsome! BUT, the downside is that I didn't get any instructions. So, i have everything installed and wired except for the halos and L.E.D.s. So, i was wondering, could anyone tell me how to wire the halos and the L.E.D.s?

Oh yeah, they are just like the ones sold by Percision Muffler.

Are they like these? With the eyebrow?

http://img153.imageshack.us/img153/2909/headlights2cy.jpg

Either way...you can tap into the ground and the power for the parking light.

Black Wire To Ground, Other wire (red, yellow or white) to parking lights.

No brow, but i see what you are talking about. Thanks! I will try it out right away!

what I did with mine (the kind with the 3 LEDs under the signal) was to string all of the black wires together, and all of the *other* color wires together, and terminate them with the plug to a T-tap.

I used a test light to find the right wires that juice the parking lights, and grounded the black, just as Rocket said. I do remember distinctly that the first wire I selected on each side was the correct positive current, meaning that it was fairly obvious. I cannot remember the exact color code of the wire, however. I believe it was a white with black stripe.