Hey guys,

I've been looking at the Tien S, and Tien H sprigns and noticed that there was a .5 ince dif between the two. Was thinking about putting on the Tien H springs, but was curious as to what some of you guys have out there.

Hit me up.

 

I have TRD springs. 1.25 inch
Not much of a drop but noticable.

 

I like the Htech.........close to 2' drop. nice smooth ride too, almost factory

 

i have tein n i love it. i wish the back was lower, but im gettin used to it. but u gotta drive careful as hell and u WILL scrape eventually.

 

i have tein s-tech n i love it. i wish the back was lower, but im gettin used to it. but u gotta drive careful as hell and u WILL scrape eventually.

 

Any of you guys have some pics?

 

https://www.scionlife.com/forums/viewtopic.php?t=39485

 

These are of mine with the TRDs after they settled:

 

here is my Htech on 19's.....




so you can see the back end better, some people dont like the sag the Stechs give.......
one benifit i found with the Htech is ifyou put anything in your tc in the back, or people.......when it sags it wont rub

 

I've only had my Tanabe's on a couple of days, but I can tell you, they're great...almost factory ride and a stylish drop.
Better than TRD, I believe. Probably comparable to H-Tech and softer than Hotchkis.

 

Just like Kilo6_one I have the Tein H-Tech's and I would have to agree on the drop. Very nice look to the car and very close to stock ride. Now I just put mine in last weekend so these pictures don't show how it may look after they settle. But I hear Tein's don't settle much more than 5mm after install.

Mine without the fancy 19"



Front


Rear

 

Now I noticed that the TRD's drop about 25mm or an inch roughly, the Tien S go about 1.5 and the Tien H go about an inch. What brands should I be looking at for the 2 in drop?

 

Your info is a bit off.. Here are the Tein specs from their 06 Catalog.

H-Tech's are -1.9 Ft & -1.5 Rr
S-Tech's are -2.4 Ft & -2.0 Rr

 

This is mine with the TRD drop and 19's

 

Thanks for the info guys.... think I'm hittin up some Htechs