I ordered seat brackets from Weapon R and I recieved them about two weeks ago. I was very happy that I got them because I could finally install my seats after 6 months of waiting. I opened the box and come to find out there's only one seat bracket. I also noticed the box was banged up pretty bad and half of the seat bracket was sticking out of the box. :tap: I called Weapon R about 10 minutes after the UPS guy left and they told me to send them pictures and I did withen about 10 minutes I had the pictues for them. Now, its been 2 weeks and I was told they would pick them up and then when they recieve the old one they would finally send out the new ones. Its been two weeks and I have got nothen picked up or even a phone call. I am very disapointed in their service and I will never buy from them again. NEVER> NEVER< NEVER. :no:

I am just posting this because I don't want anyone else to get screwed like I did. Weapon R SUCKS and I will never deal with them again.

Heres some pics to prove what i am talken about.

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0206.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0205.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0207.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0208.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0200.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0203.jpg

yeah, ill never buy from them again either. they are having an issue with replacing my broken engine damper bracket. they say i have to send in the broken one first even though i sent them pics of the bracket, my proof of purchase and yet i am supposed to go through the trouble of removing it and wait for the new one to come in then install it again. When the whole issue is thier crappy welding job. I just dont have the time to take it off in the first place. i only work 70hrs+ a week!

So i welded it myself instead.

Sorry to add to your post but i wanted to jump on the bandwagon with this one, lol

No, its cool man. Its sad to see how many of us Scion owners are getting screwed by after maket part companies.

yup!

Most of them are pretty good on this site, and MWM APPEARS to be ok but they are very difficult to work with. I gave up after going back and forth for 3-4 weeks. Definately not going back to them!

I have already let others in my community aware of thier CS issues as well. whatever, thier loss i guess

No, its cool man. Its sad to see how many of us Scion owners are getting screwed by after maket part companies.


call them back and ask to speak with ray


im sure he will work somthing out with you. i cant speak for the reset of the company but i know he is a good guy and do all he can tho help you

i feel ur pain, i got both my brackets, but mine were sticking out of the box the same way. i was also told my brackets would fit the seat i got...yeaa...NOPE!!!
so now i have to wait 3weeks for a custom bracket, and spend more money....real fun

I called today and they are sending them out right away. They told me its UPS's fault and not theres. I just told them I don't care about what you have to say, just give me my brackets.

after looking at the pictures, and seeing how the bracket was packaged in the box, I feel I had to post. I work at the UPS Store and pack tons of boxes on a daily basis. It looks to me that that box was packaged with no peanuts or bubble wrap for something that is metal, sharp edges, and could easily pierce through a single corrigated box. They should definitly give atleast an inch an a half on every side of the box and atleast use peanuts surrounding the mounting bracket. There is no way something that heavy with that many sharp edges will ever make it without getting damaged (the box or the item). They need to learn how to box things up. That should have never arrived the way it did.

^ well theyre right though... UPS SUCKS. they tossed an air strut i ordered from air lift company, OVER MY FENCE to put it in my backyard for "safety"... the fitting broke in the strut, and the strut locked up. the box was f'd up too....

sometimes we overlook the messenger... cuz sometimes it IS the messengers fault..

I called today and they are sending them out right away. They told me its UPS's fault and not theres. I just told them I don't care about what you have to say, just give me my brackets.although i dont like weapon-r parts, i agree with it not being their fault. as a fedex ground employee i can say the way they run things at ups is about the same. your box looks like it got jammed up on the convayor belt. and that kind of force popped the box open and the other 1 fell out. thats also y part of it is stickin out the box. 1 of the handlers there just taped it up and sent it back down the belt to b loaded onto a trailer or a van :nope: instead of being takin to the QA (quality asurance) manager to b handled correctly. as bad as i think wr is they wouldnt ship u a box like that. i do this mess every day so trust me. your other bracket is at the ups terminal somewhere. this problem is the reason y i check with every company to c who they go though for their shipping so i know what to expect. this is a warning to everybody that reads what i just said, especialy for those who order anything fiberglass.

I called today and they are sending them out right away. They told me its UPS's fault and not theres. I just told them I don't care about what you have to say, just give me my brackets.although i dont like wearon-r parts, i agree with it not being their fault. as a fedex ground employee i can say the way they run things at ups is about the same. your box looks like it got jammed up on the convayor belt. and that kind of force popped the box open and the other 1 fell out. thats also y part of it is stickin out the box. 1 of the handlers there just taped it up and sent it back down the belt to b loaded onto a trailer or a van :nope: instead of being takin to the QA (quality asurance) manager to b handled correctly. as bad as i think wr is they wouldnt ship u a box like that. i do this mess every day so trust me. your other bracket is at the ups terminal somewhere. this problem is the reason y i check with every company to c who they go though for their shipping so i know what to expect. this is a warning to everybody that reads what i just said, especialy for those who order fiberglass anything.

I have had many boxes that were sent back directly to our store because the packaging wasn't sufficient and the box either caved in, or was damaged. They aren't going to just slap some tape on it and send it on its way when it looks as destroyed as that box does. DOESN'T HAPPEN. That box definitly was not a brand new box to begin with, look at all the tape on it. All that tape would not do anything for a brand new box, you wouldn't need it. About the driver throwing the other guys strut into his backyard... :loser: ...thats just an idiot driver. Those safety concerns/situations are up to the drivers. Looks like the one that delivered your box didn't know what he was doing and/or was very afraid of it getting stolen. The box shouldn't have arrived as it did, it should have been stopped and sent back to weapon R, but I can tell you for a fact that UPS didn't do all that damage. When I bought my intake from Weapon R - it was sent to me in the original box that was inside another box filled with peanuts. It arrived perfect, I don't know who handled the shipping for your mounting bracket...but they should be fired. :no:

I called today and they are sending them out right away. They told me its UPS's fault and not theres. I just told them I don't care about what you have to say, just give me my brackets.although i dont like wearon-r parts, i agree with it not being their fault. as a fedex ground employee i can say the way they run things at ups is about the same. your box looks like it got jammed up on the convayor belt. and that kind of force popped the box open and the other 1 fell out. thats also y part of it is stickin out the box. 1 of the handlers there just taped it up and sent it back down the belt to b loaded onto a trailer or a van :nope: instead of being takin to the QA (quality asurance) manager to b handled correctly. as bad as i think wr is they wouldnt ship u a box like that. i do this mess every day so trust me. your other bracket is at the ups terminal somewhere. this problem is the reason y i check with every company to c who they go though for their shipping so i know what to expect. this is a warning to everybody that reads what i just said, especialy for those who order fiberglass anything.

I have had many boxes that were sent back directly to our store because the packaging wasn't sufficient and the box either caved in, or was damaged. They aren't going to just slap some tape on it and send it on its way when it looks as destroyed as that box does. DOESN'T HAPPEN. That box definitly was not a brand new box to begin with, look at all the tape on it. All that tape would not do anything for a brand new box, you wouldn't need it. About the driver throwing the other guys strut into his backyard... :loser: ...thats just an idiot driver. Those safety concerns/situations are up to the drivers. Looks like the one that delivered your box didn't know what he was doing and/or was very afraid of it getting stolen. The box shouldn't have arrived as it did, it should have been stopped and sent back to weapon R, but I can tell you for a fact that UPS didn't do all that damage. When I bought my intake from Weapon R - it was sent to me in the original box that was inside another box filled with peanuts. It arrived perfect, I don't know who handled the shipping for your mounting bracket...but they should be fired. :no:i c your point, but like i said, i do this every day at the terminal and i c boxes like his get caught out like that all the time, i just dont tape it up and put it back on the belt to b processed and delivered. i noticed that a box could start off new, but for some reason, by the time it gets to the 2nd or 3rd terminal transfer, it would look like that. the way its packed does have a lot to do wit it, but we wont know how it was packaged till he gets his new shippment. a lot of people dont know how mail is processed. we know its waaaaay more than just about the delivery man. i've seen intake systems pass through the building every day with no problem. when a bigger box is tryin to make it through the building, the chances for bottle necking with smaller boxes increase, there for damaging the bigger box on a 3ft wide convayor belt. :doh:

i hate when places give you the run-around and try to stick the blame on someone else

i hate when places give you the run-around and try to stick the blame on someone else

I can't stand that either. The bracket was wrapped in about an 1/2 inch of very small bubble wrap. The part that was sticking out of the box was not even wrapped. If they packeged it right in the first place I would be sitting on my seats in my tC already. But now I have to wait even longer. :nope:

I called today and they are sending them out right away. They told me its UPS's fault and not theres. I just told them I don't care about what you have to say, just give me my brackets.although i dont like wearon-r parts, i agree with it not being their fault. as a fedex ground employee i can say the way they run things at ups is about the same. your box looks like it got jammed up on the convayor belt. and that kind of force popped the box open and the other 1 fell out. thats also y part of it is stickin out the box. 1 of the handlers there just taped it up and sent it back down the belt to b loaded onto a trailer or a van :nope: instead of being takin to the QA (quality asurance) manager to b handled correctly. as bad as i think wr is they wouldnt ship u a box like that. i do this mess every day so trust me. your other bracket is at the ups terminal somewhere. this problem is the reason y i check with every company to c who they go though for their shipping so i know what to expect. this is a warning to everybody that reads what i just said, especialy for those who order fiberglass anything.

I have had many boxes that were sent back directly to our store because the packaging wasn't sufficient and the box either caved in, or was damaged. They aren't going to just slap some tape on it and send it on its way when it looks as destroyed as that box does. DOESN'T HAPPEN. That box definitly was not a brand new box to begin with, look at all the tape on it. All that tape would not do anything for a brand new box, you wouldn't need it. About the driver throwing the other guys strut into his backyard... :loser: ...thats just an idiot driver. Those safety concerns/situations are up to the drivers. Looks like the one that delivered your box didn't know what he was doing and/or was very afraid of it getting stolen. The box shouldn't have arrived as it did, it should have been stopped and sent back to weapon R, but I can tell you for a fact that UPS didn't do all that damage. When I bought my intake from Weapon R - it was sent to me in the original box that was inside another box filled with peanuts. It arrived perfect, I don't know who handled the shipping for your mounting bracket...but they should be fired. :no:i c your point, but like i said, i do this every day at the terminal and i c boxes like his get caught out like that all the time, i just dont tape it up and put it back on the belt to b processed and delivered. i noticed that a box could start off new, but for some reason, by the time it gets to the 2nd or 3rd terminal transfer, it would look like that. the way its packed does have a lot to do wit it, but we wont know how it was packaged till he gets his new shippment. a lot of people dont know how mail is processed. we know its waaaaay more than just about the delivery man. i've seen intake systems pass through the building every day with no problem. when a bigger box is tryin to make it through the building, the chances for bottle necking with smaller boxes increase, there for damaging the bigger box on a 3ft wide convayor belt. :doh:

I agree with that. Hopefully they pack it better next time so the box doesn't end up destroyed. All parties were at fault in this case. Sucks to be the one that has to deal with it all :(

I ordered seat brackets from Weapon R and I recieved them about two weeks ago. I was very happy that I got them because I could finally install my seats after 6 months of waiting. I opened the box and come to find out there's only one seat bracket. I also noticed the box was banged up pretty bad and half of the seat bracket was sticking out of the box. :tap: I called Weapon R about 10 minutes after the UPS guy left and they told me to send them pictures and I did withen about 10 minutes I had the pictues for them. Now, its been 2 weeks and I was told they would pick them up and then when they recieve the old one they would finally send out the new ones. Its been two weeks and I have got nothen picked up or even a phone call. I am very disapointed in their service and I will never buy from them again. NEVER> NEVER< NEVER. :no:

I am just posting this because I don't want anyone else to get screwed like I did. Weapon R SUCKS and I will never deal with them again.

Heres some pics to prove what i am talken about.

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0206.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0205.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0207.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0208.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0200.jpg

http://i33.photobucket.com/albums/d51/fairladyz541/DSCN0203.jpg




Let me start off by saying if anyone receives a package from any shipping company from any company in the condition that this customer received it in should automaticly refuse the shipment for damaged goods. In no way do we ship any item out in that condition. Also if you look at the pictures there is brown packing tape. UPS BROWN packing tape. We do not use UPS BROWN packing tape. I can tell you i persoanlly packaged that "SET" of seat brackets. From what i can tell UPS damaged the box LOST the other side seat bracket. I also explained to this customer that there is a process that wee must go through to file a damage claim through UPS. I did tell you it will take time to go through this process. Just friday afternoon we received notice that UPS is has denied our claim.

also in regards to the UPS store worker the brackets were wrapped in multiple layers of bubble wrap. I personally wrapped them myself. Looks like UPS lost the bubble wrap too.

I am extremlly sorry you feel this way , and had to go on the board to voice your opinions. Please call me directlly to resolve this issue accordinlly.

Chris w. Weapon-R / Monstermotorworks

i hate when places give you the run-around and try to stick the blame on someone else

It is not a run around. there is a process a comapny that ships item they must go through to file claims for damged goods.

Im sorry you dont understand these process.

yea dont buy from weapon-r
theyre stuff is cheap

yea dont buy from weapon-r
theyre stuff is cheap

I would like to hear your opinion why yo think our product is cheap. I would like the opportunity to chage your opinion. You going to the SE 2nd aniversary gathering if so pm what product you would love to see and ill help you with that opinion.

thanks
chris w.

I wont comment on WR. I will comment on shipping companies.

When I was 18, I worked at RPS (like UPS but different company). The stuff they do to packages is amazing. I loaded trucks at main hub. Stuff came down a chute to the back of the truck. I picked the box up and loaded in a 40 foot trailer by hand. Well the front of the truck is a 40 foot walk from where the package lands. Do you think I walked each package to the front of the truc???
The stuff people did to packages was horrible. We did bulk shipments of cheetos. Guys would ACCIDENTLY break the box open, grab a bag of cheetos, then tape it up and throw a claim sticker on it. And on it went.

Yup I highly doubt WR sent the box like that. This is UPS fault. But WR shouldnt make you wait for a claim to go through. That is their battle to get refunded. They should refund or ship new to you immediatly.

Good luck

yea dont buy from weapon-r
theyre stuff is cheap

I would like to hear your opinion why yo think our product is cheap. I would like the opportunity to chage your opinion. You going to the SE 2nd aniversary gathering if so pm what product you would love to see and ill help you with that opinion.

thanks
chris w.

sorry man
some people been telling that weapon-r is low quality
thats just what i heard

you shouldn't jump on the bandwagon just because you hear comments from other people... it might be a good way as far as initial research, but people's opinions and experiences vary.. don't come to conclusions (and post as such) until you have had those experiences yourself

when you have had experiences with them on a first hand basis, it would be better for you then to be able to express your opinion... but since you haven't (that i can see).. then well... i hope that others don't influence your opinions so quickly.

sorry man
some people been telling that weapon-r is low quality
thats just what i heard

Ah so you are basing your opinion on hear say, and not an actual experience such as actually holding the parts, installing the part, or actually selling the part.

:loser:

sorry man
some people been telling that weapon-r is low quality
thats just what i heard

I make sure there is a reason behind opinions before I trust them. People like that just make it harder to get an honest review of a product. :loser:

Ok, I'll chime in on WeaponR. I purchased their seat brackets for my xB and the seating position was insanely low. I'm 6'1" and I could barely see over the steering wheel with these brackets attatched to Sparco seats. Anyone under 6 feet tall would not be able to see out the front windshield, let alone drive the car safely.

Let me start off by saying if anyone receives a package from any shipping company from any company in the condition that this customer received it in should automaticly refuse the shipment for damaged goods. In no way do we ship any item out in that condition. Also if you look at the pictures there is brown packing tape. UPS BROWN packing tape. We do not use UPS BROWN packing tape. I can tell you i persoanlly packaged that "SET" of seat brackets. From what i can tell UPS damaged the box LOST the other side seat bracket. I also explained to this customer that there is a process that wee must go through to file a damage claim through UPS. I did tell you it will take time to go through this process. Just friday afternoon we received notice that UPS is has denied our claim.

also in regards to the UPS store worker the brackets were wrapped in multiple layers of bubble wrap. I personally wrapped them myself. Looks like UPS lost the bubble wrap too.

I am extremlly sorry you feel this way , and had to go on the board to voice your opinions. Please call me directlly to resolve this issue accordinlly.

Chris w. Weapon-R / Monstermotorworks

Chris, I respect Weapon-R for coming in here to clear up the issue and help out your customer personally. Any company that does that gets an extra point in my book. I just wanted to comment on the packing tape - just because it's brown, doesn't mean UPS uses it. The store I work at uses clear packaging tape and the Tempe UPS Hub uses clear tape also, I know this for a fact. Just wanted to put that out there that just because it's brown tape, doesn't mean it's UPS' tape. Yea, he should have denied the package, but the only problem most times with that is that if the driver determines the area to be safe, they will just leave the package at the door and go. Most people would take the package in and open it up before they call UPS to come pick it back up and deny the package.

PS: I love my intake :P

Let me start off by saying if anyone receives a package from any shipping company from any company in the condition that this customer received it in should automaticly refuse the shipment for damaged goods. In no way do we ship any item out in that condition. Also if you look at the pictures there is brown packing tape. UPS BROWN packing tape. We do not use UPS BROWN packing tape. I can tell you i persoanlly packaged that "SET" of seat brackets. From what i can tell UPS damaged the box LOST the other side seat bracket. I also explained to this customer that there is a process that wee must go through to file a damage claim through UPS. I did tell you it will take time to go through this process. Just friday afternoon we received notice that UPS is has denied our claim.

also in regards to the UPS store worker the brackets were wrapped in multiple layers of bubble wrap. I personally wrapped them myself. Looks like UPS lost the bubble wrap too.

I am extremlly sorry you feel this way , and had to go on the board to voice your opinions. Please call me directlly to resolve this issue accordinlly.

Chris w. Weapon-R / Monstermotorworks


This is such bull. I will not even have my seats in before HIN and I am so ____ed off. THANKS WEAPON R. I have filled a clain to the better business bureau because this has gone on too long. If you see the tape there is no brown tape on the box and I will remove the tape to prove it. Also, don't get all ____ed off at me because I posted bad things about your company on SL. I sent you an email about me posting how your customer service sucks and I never got a reply. I STILL HAVE NOT GOTTEN A REPLAY!!!!! :tap: I payed you guys the same day and very quick and you are working very slow on your part. I feel that I gave you guys a chance and you screwed yourself. :clap: I am STILL waiting for my brackets. ALMOST A MONTH LATER!!!!! :rofl: WOWOWOW WHAT A COMPANY HAHAHAHA :rofl:

:yawn: ......So, Will I ever get my seat brackets..... :yawn:

good luck!!

I know i WILL NOT EVER do anymore business with them and I hope all others follow suit. MMW thinks they are the ____ and they have one hell of an ego. not sure why..........

I would totaly like to clear this issue up. The return label was email to you 1 1/2 weeks ago for the other seat brackets to be picked up from you. please check your email. UPS made a mistake when issuing the call tag pick-up. the ups came here wanting to pick up those seat brackets. When they should have went to you to pick them up. the long delay is from them. If you think we are given you the run around here is the ref number from ups.
1zw63e412641451188. call ups. I personally own a scion as well and i feel your frustration. but to put the blame on a company a file a BBB claim is not the right way to go. How bout filing a BBB against ups as well?


Weapon-R has done its part and you will be getting your brackets today.

I am sorry you feel this way. But I understand you have the right to say what you want. I just hope this clears up this situation.


scion541@yahoo.com- thats the email our accounting has.




1Z4A477E0349858118-for the new brackets.

1Z 4A4 77E 03 4985 811 8

ADDISON, IL, US 03/13/2006 8:21 A.M. OUT FOR DELIVERY

told you it wasnt wwm fault


either way looks like you will have your brackets soon so we can do the seat install

ADDISON, IL, US 03/13/2006 6:43 P.M. THE RECEIVER WAS UNAVAILABLE TO SIGN ON THE 1ST DELIVERY ATTEMPT. A 2ND DELIVERY ATTEMPT WILL BE MADE

HA brown tape thats funny :rofl: I unload trucks part-time at ups to buy mods for my tc we use clear tape to seal a box that rips cause it was packed poorly in the first place. I seen people put chainsaws in crappy boxs and it comes right out the side what so u expect paper vs metel duh!!! Boxs rip all day some are fault but mostly all cause people and some companys dont use there brain.

ADDISON, IL, US 03/13/2006 6:43 P.M. THE RECEIVER WAS UNAVAILABLE TO SIGN ON THE 1ST DELIVERY ATTEMPT. A 2ND DELIVERY ATTEMPT WILL BE MADE


Damn...I told my mom to stay home to make sure she gets this package.... :nope: .....I will not being doing the dishes for her in the morning.... :rofl:

I don't see why these companies should operate any differentlry tahn other types of businesses? I understand they are small, but whats with this waiting for a UPS claim to be filed? Customer revieves broken product, returns product, recieves new product. What happens on the back end is the companies' business. Any reputable company would operate that way. Reminds me of when I worked as a house painter; my boss would get in arguements with the homeowner, end up not getting paid - then would come to us and say "I didn't get paid on that last job, I'll call you when I get a check." Aaaaaaaahhhh... no, sorry bud. My business arrangement with you is not dependent on your dealings with others.

So, I got the seat brackets today and they where in perfect condition... :clap: ....I went to mount them and I couldnt believe my eyes....TOO NARROW... :tap: .....Today I gave up and I am going to put them in my next project....Which should begain next month: 240SX............

So, I got the seat brackets today and they where in perfect condition... :clap: ....I went to mount them and I couldnt believe my eyes....TOO NARROW... :tap: .....Today I gave up and I am going to put them in my next project....Which should begain next month: 240SX............


told you they only fit recaro (i think or it might have been sparco) and weapon r and any thing else that uses the same mounting holes

i can cusomize them for you though or you can do the same thing im doing sell the tc and buy a project car

Ok, I'll chime in on WeaponR. I purchased their seat brackets for my xB and the seating position was insanely low. I'm 6'1" and I could barely see over the steering wheel with these brackets attatched to Sparco seats. Anyone under 6 feet tall would not be able to see out the front windshield, let alone drive the car safely.

I'll take pictures of my custom brackets. my seating position is like stock...possibly 1" lower.

Lip, you fabb'd up the brackets yourself?? Cool, you should start production on your own brackets as you have a reputable company that people can trust and customer assistance that is top notch. :bow: I no longer have the Sparco seats, actually I only had them in the car for about a week and removed them cause I felt it was dangerous to drive in that seating position and only 3 of the 4 bolts lined up with the brackets.

So we can all agree that WeaponR SUCKS!! Their brackets for the xB were too low and didn't line up with Sparco seats. When I asked them what I should do, I got a bs response that I should re-drill the brackets myself. Thanks WeaponR.........for nothing!

When I finally got the brackets, I was like wait hold on this little strip of crap is suppose to hold me in and not kill me, :nails:, yeah right!!! The holes where drilled so close to the end if I would get into an accident the bolts would snap right off and rip the hole open.... :clap: ......So, now I decided I will just throw the seat brackets away because I dont even want someone else to rish their lives with them, oh and by the way Weapon R I am still waiting for the return shipping so I can ship back your ONE seat bracket its already in the box waiting for your label... :rofl: ..... :rofl: ..... :rofl: .....I bet it will be like a month again... :clap: ......


I would not let anyone buy these brackets and I give this product two thumbs down..Not worth dieing over and not worth $110

Sorry to hear. Anything can happen in shipping. Insurance is a must nowadays.

I love my WR short ram. Wouldn't trade it for any other filter/intake.

real brackets...but i'm sure some company will COPY them

http://is.rely.net/1-181-47801-l-mVVb1OUM3vQQfCi73uBIuQ.jpg

wow these prackets look like they will break if i step on them lol i dont know how they will hold up in a accedent lol

but i dont think were going to put them in his tc now

any plans on brackets like that for the tc LIP???

contemplating producing these. its alot of work..need to find someone to make a jig and reproduce them. Not cheap is the issue. Whats nice though is...i have some adjustment, front to rear, and tilt.

The alluminum side brackets come with the carbon fiber seats we well on our site.

I'll look into the production of them and take a look at a tc

btw...my seats don't move what so ever. solid as rock

i hate when places give you the run-around and try to stick the blame on someone else

It is not a run around. there is a process a comapny that ships item they must go through to file claims for damged goods.

Im sorry you dont understand these process.

Actually this is true, UPS dent my one of my 18" wheel during shipping
it took the online wheel company 3 months to complete the claim process and
send me a new wheel. UPS claims are extremely slow so you just have to be patient

i hate when places give you the run-around and try to stick the blame on someone else

It is not a run around. there is a process a comapny that ships item they must go through to file claims for damged goods.

Im sorry you dont understand these process.

Actually this is true, UPS dent my one of my 18" wheel during shipping
it took the online wheel company 3 months to complete the claim process and
send me a new wheel. UPS claims are extremely slow so you just have to be patient


:clap: see many do not know what a company must go through.

When I finally got the brackets, I was like wait hold on this little strip of crap is suppose to hold me in and not kill me, :nails:, yeah right!!! The holes where drilled so close to the end if I would get into an accident the bolts would snap right off and rip the hole open.... :clap: ......So, now I decided I will just throw the seat brackets away because I dont even want someone else to rish their lives with them, oh and by the way Weapon R I am still waiting for the return shipping so I can ship back your ONE seat bracket its already in the box waiting for your label... :rofl: ..... :rofl: ..... :rofl: .....I bet it will be like a month again... :clap: ......


I would not let anyone buy these brackets and I give this product two thumbs down..Not worth dieing over and not worth $110


Dear Mr Justin Humner

Ref#46430

Cc: Chris Wanstrath – WR Sales mgr.



According to our records, our UPS electronic call tag issued to you on March 12, 06 tracking #: 1Z4A477E9051258063 is still outstanding, as we are still awaiting

For the damage return Scion Tc seat bracket kit. Your exchange new seat bracket replacement were send on March 6 UPS tracking #1Z4A477E0349858118 showing were delivered on time. We would appreciate your full cooperation on returning the damaged seat bracket accordingly.

If you have any questions regarding this request, please do not hesitate to contact me

Well, if you can read emails or maybe posts from above.... :rofl:....I said the bracket is sitting in the box taped up waiting for you to pay for the shipping...... :rofl: .....But, wait its Weapon R so I must be use to waiting....... :rofl: ...... :rofl: ..... :rofl: ...... :rofl:

Well, if you can read emails or maybe posts from above.... :rofl:....I said the bracket is sitting in the box taped up waiting for you to pay for the shipping...... :rofl: .....But, wait its Weapon R so I must be use to waiting....... :rofl: ...... :rofl: ..... :rofl: ...... :rofl:


:rofl: :rofl:
IM SORY BUT IF YOU COULD READ
we issued you a prepayed tag over 1 1/2 months ago and you stil have not replied or even called us here. We are still waiting for the damaged seat bracket. please do good on your part and give me a call here at the office. We will be billing you for another full set of seat brackets if you do not return the seat brackets promptly.

Below is an email sent to in regards when we sent you the prepaid tag.
if another prepaid tag is necessary please let me know.


Dear Mr Justin Humner

Ref#46430

Cc: Chris Wanstrath – WR Sales mgr.



According to our records, our UPS electronic call tag issued to you on March 12, 06 tracking #: 1Z4A477E9051258063 is still outstanding, as we are still awaiting

For the damage return Scion Tc seat bracket kit. Your exchange new seat bracket replacement were send on March 6 UPS tracking #1Z4A477E0349858118 showing were delivered on time. We would appreciate your full cooperation on returning the damaged seat bracket accordingly.

If you have any questions regarding this request, please do not hesitate to contact me

Still have the brackeet waiting in the box by the friont door. I am still waiting for the call tag email that I have yet to still get in my e-mails..........On another note I had all three seat brackets out and something catched my eye........THEY ARE NOT EVEN A PERVECT SQUARE......No I don't know if this is suppose the be this way so I took them to my shop and they said that it was very dangrous and these seat brackets where not made right...........I don't know what my steps as a consumer are but I am going to see what I can do about being sold CRAP from a company........... :tap:...........I ordered a seat bracket and I recieved Crap......... :clap:.........I am not very happy and Weapon R you will be hearing more from me due to selling me a piece of crap............ :tap:...........How can you not make a perfect square and have each side be off my a couple of degrees...........I am looking to get my money back or something because you sent me crap and it dosent make sense that you would send this to a customer..........I am done on this thread do to the fact that I am seeking help from a legal stand point because I didn't get what i paid for. Thats breaking a law and this will be settled once and for all.......... :clap:

Still have the brackeet waiting in the box by the friont door. I am still waiting for the call tag email that I have yet to still get in my e-mails..........On another note I had all three seat brackets out and something catched my eye........THEY ARE NOT EVEN A PERVECT SQUARE......No I don't know if this is suppose the be this way so I took them to my shop and they said that it was very dangrous and these seat brackets where not made right...........I don't know what my steps as a consumer are but I am going to see what I can do about being sold CRAP from a company........... :tap:...........I ordered a seat bracket and I recieved Crap......... :clap:.........I am not very happy and Weapon R you will be hearing more from me due to selling me a piece of crap............ :tap:...........How can you not make a perfect square and have each side be off my a couple of degrees...........I am looking to get my money back or something because you sent me crap and it dosent make sense that you would send this to a customer..........I am done on this thread do to the fact that I am seeking help from a legal stand point because I didn't get what i paid for. Thats breaking a law and this will be settled once and for all.......... :clap:



Like i said before please read the last post we have done our part to email you. there is an exact copy of the email sent to you in the previous post. Maybe you have given us an email that is not working. please email me with a correct email address. chris.wanstrath@weapon-r.com I will email you another call tag ASAP. We have made every effort to satisfy you as a customer with no direct contact from you to us here to resolve this situation. So please provide a correct email to me so i can take care of this situation.

please not we did send you out a replacement set per your request without even having the other bracket back.