Ok guys, I need some help. Currently I have an '05 xB with TYC tail lights, and I'm switching back to stock tail lights. I have the stock ones at my house right now, but I cannot install them just yet. I need the harnessing or wiring or whatever you call it for the stock tail lights. With the TYC, there are 3 bulbs in the housing with three cables feeding into one connector that plugs into the receiving connector. The stock ones have only 1 bulb with one cable that feeds into the connector. I need the part number for this harnessing or wiring. I went to toyota/scion of orange yesterday and "ordered" this part. I went today to pick it up, and it turns out they thought it was the little piece the bulb plugs into that you actually put into the housing and twist to tighten. I will try to get pictures later (I'm at school). Can someone please help? Thanks.

you shouldnt need any connectors

when you unplug the tyc from the car the connector (in the xb)
should be the only plug you need for the stock tailight

Left is the stock tailight RIght is the TYC

http://www.dje2.com/albums/sciontech05/scionmaintech05tyctaillight0007.jpg

Nevermind, I went to my local dealership today and got it sorted out. I got the parts I need. Thanks.

MODS PLEASE LOCK THIS.

mmkay locking