View Full Version : ATTENTION: From Greddy 06 Emanage ECU Wiring Diagram/Pinout


cz3ch
06-02-2006, 12:16 AM
http://www.euroxb.com/greddy/06xbpinout.pdf Greddy Emanage Wiring Diagram for 06 Scion XB ECU

http://www.euroxb.com/greddy/emanage.pdf Greddy Emanage instruction manual

Good luck, this is confirmed working with Greddy!

Enjoy!

arizonaturbo
06-02-2006, 03:42 PM
So this is for the e-manage that is supplied with both the Supercharger and Turbocharger kit?

cz3ch
06-02-2006, 03:47 PM
So this is for the e-manage that is supplied with both the Supercharger and Turbocharger kit?

Yes, the emanage blue... if you have any other emanage related questions, please call greddy... but this is confirmed to be working on an 06. They just finished up installing a turbo and tuning it on an 06.

Hope this helps all those with 06 and the emanage

06charger
06-04-2006, 11:42 PM
that was my xb should get it back next week
I got it to run fine with apexi afcII with 8.5psi but lets see what e-manage can do

cz3ch
06-04-2006, 11:57 PM
that was my xb should get it back next week
I got it to run fine with apexi afcII with 8.5psi but lets see what e-manage can do

Glad you were able to drive in for the work-around... Thanks for the help!

06charger
06-05-2006, 12:01 AM
does yours run yet
nice to be in california huh

cz3ch
06-05-2006, 12:03 AM
does yours run yet
nice to be in california huh
Nope, I dumped mine, I'm going to be working ZPI to do some testing out here in Houston with one of their first public kits... so i'm going that route.. still going to have to wire the emanage but they've had the diagram for a while now

06charger
06-05-2006, 12:07 AM
i want to see what a s\c vs a turbo can do? there should be new ecu plugs for the o6

cz3ch
06-05-2006, 01:37 AM
i want to see what a s\c vs a turbo can do? there should be new ecu plugs for the o6

Yes but that won't be for a while.... Greddy got yours working, but their production harness won't be out for a bit... Hopefully sooner than later though

sideline
06-07-2006, 03:22 PM
hey guyz. finished all the wiring to emanage and car will not start. green light comes on okay which showed that wiring was completeed . I have also notified greddy and they told me not to continue trying to start car. Today i am going to hook up code reader because the check engine light on the car stays on. car starts fine when emanage is taken away.



matt

Nemesis_xD
06-08-2006, 07:31 PM
k, then I am gonna need ur help, Jaems, with my turbo

cz3ch
06-08-2006, 11:27 PM
k, then I am gonna need ur help, Jaems, with my turbo

No problem... i'll be there for ya soon enough babe..

SilverCruiser
09-25-2006, 12:31 AM
i just installed a greddy supercharger kit, i have been reading about the e-manage not working for the 06 model. i havent found any REAL fix that someone post yet? have anyone got one to work on an 06, please send me info on the fix. thanks

arizonaturbo
09-26-2006, 12:47 AM
There is no official fix yet from Greddy. They are currently working on a new harness for teh 2006 xB. I believe there are several issues including new pin configuration, CEL's and the 2nd o2 sensor.