Custom Sub Enclosure xA
Wassup all? This is my first post, so go easy
I am currently awaiting delivery of my 2006 Flint Mica Scion xA. I was approved last week, but the dealership can't find a Flint Mica xA with a manual transmission :/ They said the most time it might take to get it is 2 weeks.
With that in mind, I have some time to design my custom sub enclosure for my system. Here is what I have to install:
Head Unit - KDC-X679
Amp - KAC-X520
2 12" Subs - KFC-XW1205dB
I have built a custom box before, so I know what I'm doing, but what I need help with is the measurements of the cargo area. If anyone who owns the xA could do me a favor and measure the cargo area, it would be greatly appreciated.
The measurements I need are:
Inches from floor to top of seat (not top of headrest)
Inches from side to side of cargo area
And the last one might be a bit tricky... I need the inches from seat to hatch. I know the back seat is reclined a little so I need the measurement that is the furthest back (the top of the back seat to the hatch)
The idea I have for this box, pending I have enough room, is going to be amazing. If you guys want, I can take photos along the way in case anyone wants to repeat the process.
Anyones help with these measurements is greatly appreciated!
I am currently awaiting delivery of my 2006 Flint Mica Scion xA. I was approved last week, but the dealership can't find a Flint Mica xA with a manual transmission :/ They said the most time it might take to get it is 2 weeks. With that in mind, I have some time to design my custom sub enclosure for my system. Here is what I have to install:
Head Unit - KDC-X679
Amp - KAC-X520
2 12" Subs - KFC-XW1205dB
I have built a custom box before, so I know what I'm doing, but what I need help with is the measurements of the cargo area. If anyone who owns the xA could do me a favor and measure the cargo area, it would be greatly appreciated.
The measurements I need are:
Inches from floor to top of seat (not top of headrest)
Inches from side to side of cargo area
And the last one might be a bit tricky... I need the inches from seat to hatch. I know the back seat is reclined a little so I need the measurement that is the furthest back (the top of the back seat to the hatch)
The idea I have for this box, pending I have enough room, is going to be amazing. If you guys want, I can take photos along the way in case anyone wants to repeat the process.
Sounds sweet but... you ain't gonna have any room for anything else, but you know that
! My box is jus the recommended size for my subs, but I am soon to upgrade and remove my spare tire and drop two subs down the hole. I'll see what I can do for a fellow scion owner or soon to be owner!
Heh, thanks for checking on those measurements for me. I said I was going to be getting a Flint Mica xA, but I changed my mind and went with the Indigo Ink Pearl. I talked to the dealership today and they said my xA is coming straight from Japan because there aren't any here in the states. They said it would be here no later then the 15th and today I went in and signed all my paperwork. As soon as it gets there, all I have to do is go pick up the keys and leave. I don't know if I can make it another 8 DAYS!!!!
Thread
Thread Starter
Forum
Replies
Last Post
SloTC1
PPC: Engine / Drivetrain
14
Aug 16, 2018 02:45 PM
vi3tb0i09
PPC: Engine / Drivetrain
2
Sep 23, 2015 08:32 PM





