Hmmm whatever could be going on here????? :lalala: :lalala:

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0019.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0018.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0017.jpg

Oh and lets not forget all the little tiny knicks and and scratches due to our AMAZING paint :rofl:

maybe I'll keep my neon mounted there... looks pretty sexy LOL

bodykit!

whoa??? noooooo... never LOL :P

ITS PERFECT! Leave it as is...but you may want to use duct tape for the neon :)

hmmm... i was thinking electrical tape :tap: decisions decisions lol

Bungy cords.

ITS PERFECT! Leave it as is...but you may want to use duct tape for the neon :)

yeah and add three more neons to each side :rofl:

GENIUS!!!!

what bodykit did u get?

it's really clean and simple, the Buddy Club sides, Drifter 2 rear and m3 front, I was supposed to prototype one for a company but that fell through, and I already shipped out my old m3 bumper so I had to order one from viniati :doh:

that's gonna be sweet....cant wait to see it all done!

cant wait to see this combo...3 different styles of body kits into one combo :D...

i like the m3 front bumber, and the buddy club sides, the drifter rear is alright, but lets see this put together

yup, I'll be posting pics as they move along at the shop, I actually work right down the street :) So I can seee them tear her down and put her back together whenever I want lol... I was thinking about throwing a Kaminari spoiler in there and an APR splitter for the front but waddya think about that???

that would look pretty good..you keeping it SW??

http://www.clicksmilies.com/s0105/party/party-smiley-048.gif

I can't wait.

yeah for now, still adding to the piggy bank, first I need to buy some blizzaks for winter and then replace my old rims (long story blew my engine had to sell my SC and rims to get a new one :rofl: ) and lets not forget turbo :)

I hope sometime next summer to have it a new color, I'm letting some other people be the guinea pigs first when it comes to colors on the TC

i like the APR splitter, im gonna put it on my car if i get cf hood.....dont know about the kaminari wing, see if it'll look good after the bodykit is on.

good luck! keep us updated on the progress

will do...

here are pictures off the items that are going on

http://i84.photobucket.com/albums/k30/tc2nut4/ab_1.jpg

This is the rear bumper...So simple and so sexy :)

http://i84.photobucket.com/albums/k30/tc2nut4/4.jpg

These sideskirts: Picture courtesy of ROLSTC (Thanks)

http://i84.photobucket.com/albums/k30/tc2nut4/Scion_Tc_M3_a.jpg

And this front bumper, however mine will have the OEM grille up top and cut the OEM grill to fit the bottom also. I will also have mesh in the fog areas to match if someone wants to sell my their lower OEM grille :lalala: :lalala: :lalala:

i cannot wait to see the finale!!

thanks!!1 I'll be sure to post progress pictures...

please make sure that you take pictures AFTER the grilles have been inserted :P

i always think it looks ghetto when bodykits are installed w/o grilles in them

hmmm... i wonder where I could find a OEM upper grille???? :lalala:

:rofl:

I owe you Neothin I appreciate that, but of couse I will do that for you, wouldn't want you to vomit or anything lol

scweet!

For all your Scion TC needs log on to our website link below. We are always adding new products for the TC from body kits to lights. Our prices are really competitive and our service is great. For any questions just click on the live chat link and a customer service rep will answer all your quiestions.

Thanks
KKO

cant wait to see the outcome, in my opinion though i think that the e46 m3 front looks way too rounded to match up with the drifter rear and bc sides

hey I'm open to criticism and atleast you kept it constructive :P But it was hard to find a REALLY simple kit, the TRD lip just didn't do enough for me and the RS1 kit just didn't fit or flow all that well, I love theM3 front however the sides and rear to that kit are horrendous. The drifter 2 rear is by far my favorite though, its so clean hopefully it all works out. You're right I debated for a while about the BC sides, I had the drifter 2 sides but bleh fitted terrible and didn't mount flush it came up onto the front fender and I don't like that at all...

Keep the comments comin, hopefully I'll be able to take soem more pics today...

i got something coming for you...

uh oh chris, watcha got for me lol...and krazykustomz stop jacking people's threads, this is the third thread that I've seen that you've jacked...

x2....krazykustomz wrote exactly the same thing in my thread.
it would be ok if he at least gave some input on the topic that was discussed, but using my thread to advertise... :eyebrow:

krazykustomz youve jacked too many threads and lost all respect from me and 2 friends on the site, there will be no business done with you now. think before you spam....

Oh sweet! I can't wait to see pics!!

:D Excited

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0843.jpg

Damn near my whole left side is getting repainted lol

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0842.jpg

And my hood, due to our lovely paint that flakes off with a finger nail :rofl:

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0844.jpg

Look at that sexy ___ lol

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0846.jpg

A little bit of fitment issue on the sides of the rear bumper :nails: I knew better than ordering from extreme dimensions why didn't I listen to myself :doh:

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0847.jpg

Even worse of the left side :(

ehh.. not impressed.

i feel the same, just didnt want to burst his bubble

hey tc2nut4 let me know what body shop and how much it cost to install the kit and paint.im ordering a wide kit for my tc soon. thanks and looking good.

just for the record... they are going to fit it and make sure its done properly lol. I would never disgrace my car without properly fitting a kit, I guess I should have mentioned they were going to fit it right in the above pics haha, but they tell me that it will be seamless with the body lines when they are done, but its going to run me an extra $250 for labor to add and remove the fiberglass to fit the contours. I'd personally vomit if I ever saw a car with that poor of fitment driving around. Ed I can't really say what its going to run because I am getting the chips in my hood fixed, the minor ding in my quarter panel and also fixing my door jam that the previous owner scraped up when he got locked out with his hanger :no: :tap: But for all the body work I just did it is going to run me like $1200 bucks...

i feel the same, just didnt want to burst his bubble

:rofl: well someone had to be honest. OEM FTW! but to each his own i guess.

yeah to each his own... thanks for your well thought out opinion though I could tell it took you hours to come up with that... Its cool though some will like it some won't, I'll chalk you up to the don't like it category

Sadly, some Civic owners would leave the C-clamps on and call it finished, but it's going to look sick when it fitted and painted.

i'm telling you. those seats would be sick in your car.

I bet it's going to look great when fitted and painted....can't wait to see the finished product.

Just an update here are some pics from this morning at the body shop and the fit so far. They said they have a little bit more to do yet but as you can see its MUCH better... sorry about the quality, my camera died so I had to use my cell phone :(

http://i84.photobucket.com/albums/k30/tc2nut4/CopyofSSPX0023.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/CopyofSSPX0022.jpg

ok ive edited this topic. so lets keep it clean and on topic, if u dont like what hes doing then just say so in as nice of a way as possible. no more attacking eachother thats just lame. if u wanna argue back and forth do so via pm. thanks and have a great day...


p.s. i think the kit will look great after paint.

wow. just when i was about to drop the bomb sceen capture lol. i guess ill save it for a rainy day lol.

thanks dave appreciate the support :) Keep the CONSTRUCTIVE criticism coming, good or bad is welcome lol

bryce, that is so ugly. what were you thinking.

j/k... so far it looks good. but for a final say, i want to see it in person.

when do u think it will hit paint?

hopefully today or tomorrow, I'm actually going by there in about twenty minutes to take some more pics if anything new has gone on. They said latest by Friday so we shall see...

Well they got the right side to fit near perfect here's a picture of that... Just a little more sanding but that should do it :)

http://i84.photobucket.com/albums/k30/tc2nut4/100_4487.jpg

And here's the front bumper ready to be painted :) Perfection right off the truck straight from Viniati!

http://i84.photobucket.com/albums/k30/tc2nut4/100_4488.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/100_4486.jpg

Yup this baby will need a nice detailing when this is all said and done :rofl:

go get more pics :P

I want to but they said they're tired of seeing me :cry:

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0034.jpg

I want to but they said they're tired of seeing me :cry:

tell them to shove it. and go get more pics now :rofl:

I want to but they said they're tired of seeing me :cry:

i'd get tired of seeing you 2 if u kept bugging me :rofl:

well i do know the guy who owns the shop, he just likes to mess with me lol... I'll go tomorrow morning dave, maybe I'll get some pics of it in the booth :love:

schweet. i think it will look 1000x better painted :D

hmmm you really think so???? For a while there I was contemplating driving around with just the primer on there :rofl:

:lol:

leave the primer on there! Dont you know primer is the thing nowdays?...dont miss your chance...you can still be cool :rolling:


...JK...jk..
cant wait to see it when it's all done...it's gonna be one HOT ride

For all your Scion TC needs (we will continue jacking threads until you) log on to our website link below. We are always adding new products for the TC from body kits to lights. Our prices are really competitive and our service is great. For any questions just click on the live chat link and a customer service rep will answer all your quiestions.

Thanks
KKO


:rofl: sorry had to do it...

lmao dave!

If you leave it just primered, you can be like the awesome guy with his Civic hatchback that lives by me. Black doors, primered body kit, white hood, hawtness achieved.

lmao dave!

:P

dang i better start ordering my kit, cant let you have the best tc in york :silly: lol

who me???? Hottest TC in York?????? Nahhhhhh... lol But I will take that compliment.

P.S. Dave that was some funny stuff with Krazy Kustomz post you did there, he's terrible with that lol

hey we should start a tc club in york.

I think there is one of sorts...

who me???? Hottest TC in York?????? Nahhhhhh... lol But I will take that compliment.

P.S. Dave that was some funny stuff with Krazy Kustomz post you did there, he's terrible with that lol

lol u like that huh.

yeah, it made me giggle in the least lol

giggle hehe.

Well guys my car isn't done but I just got my tires in. Yokohoma Parada Spec-2s... One of the cooler tread patterns for sure lol

http://i84.photobucket.com/albums/k30/tc2nut4/100_4489.jpg


Here's the wall of wheels lol. Beside it you'll see my blown engine, and intake and beside that you'll see two headers and our rinky dink s pipe :rofl: If you were superman and had xray vision you'd see stock tail lights behind the tires/wheels lol... Me????? Have too many parts laying around???? Nooooooo.......

P.S. Don't mind my dad's Hemi big block sitting in the corner lol

http://i84.photobucket.com/albums/k30/tc2nut4/100_4494.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/100_4495.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/100_4496.jpg

http://i84.photobucket.com/albums/k30/tc2nut4/100_4497.jpg


:rofl: :rofl: sorry couldn't help it guys, this is my dad's toy lol and some pictures were in my digital camera

wow... :question: ummm they really did ALOT of work...where did you say you bought that body kit again?








:rofl: :rofl: you got me all excited. and then you bashed my dreams with a wooden bat! :tap:

hahahahhaha i couldn't help it, its my ultra wide body kit with my 20" lift kit lol

those prada spec 2 goin on stock wheels?

and is the car done yet?

i feel so cheated!! can't wait til you get pics up though, should look sweeeeeeet

haha no its going in the booth today so hopefully I can pick it up tonight or tomorrow morning. The parada spec-2s are going on enkei evo6s

wow how did he go about getting that ??

if its goin in for paint today dont expect to pick it up today. why dont u go down and get some pics of the car in the booth :P

my dad???

yes ...

ah hah just wanted to make sure before i answered.... He and I actually restored it from the frame up. He bought the orignal frame and body from a place called Memphis Equipment. They have all kind of old military vehicles there. If you have the money you can by old tanks and restore them but my dad isn't that loaded lol.

His is called an m37, its all but 3 tons and has a 98hp motor with a transmission that peaks at 48 mph :rofl:

hahha go get pics of the tC grrr



:silly:

His is called an m37, its all but 3 tons and has a 98hp motor with a transmission that peaks at 48 mph :rofl:

Man i would hate to be in a war with that thing.

alright alright I will... I'm leaving class now, gotta drive one county over to the body shop to take pics of it. And those pics better be of it in the booth lol

His is called an m37, its all but 3 tons and has a 98hp motor with a transmission that peaks at 48 mph :rofl:

Man i would hate to be in a war with that thing.

hahaha werd. :doh:

yeah there's no running from anything in that truck

Well here's some more for you...

http://i84.photobucket.com/albums/k30/tc2nut4/100_4507.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4506.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4505.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4504.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4503.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4502.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4501.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4499.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/100_4498.jpg

here's a video of him painting for you guys too

http://s84.photobucket.com/albums/k30/tc2nut4/?action=view&current=100_4508.flv

that ____ is hot. i cant wait to see it all together!

yo bryce. what it is what it do. have you ever seen a player like this? holla at me.

dude chris ur so random.

Yep, the guys on Scion Life thats us. Lol That body kit is siiiiiick! Where did you get it and what kind is it. I'm lovin it!!!

http://i84.photobucket.com/albums/k30/tc2nut4/100_4502.jpg

I got scared when I saw this shot...it looked like you put a big a$$ wing on your tC.

Looks like mine when it went in for paint.

http://i17.photobucket.com/albums/b65/mystikcjris/img05122cd.jpg

cant wate to see yours

yours appears to be a bit more in depth than mine lol... but no I'd neever disgrace our car by puttin that a big ___ wing on it lol

wheres the final pics w/ the kit fully installed lol...you said it was complete, i still see painted peices off the car :D

:tap: :nope: :no:

:tap: :nope: :no:

ok im def. lost

wait a sec, i think i'm lost. Wasn't ur car already white?? Why's it getting repainted white??

thats exaclty! awhat i was wondering???

whoa??? mine is just getting a kit put on lol, that other guy just posted pics of his car paint in progress as a comparison lol... And when i said complete that was just joking about the pics on the top of page four lol... new pics should be today. The body shop promised me lol

hey guys anything that can be placed on the cars bumpers to protect them from scratches????....ive heard of a 3m wrap.....wat is dat wat does it protect and where do i buy it.....ohh and how do i install it???

do you have a stock bumper?

hey guys anything that can be placed on the cars bumpers to protect them from scratches????....ive heard of a 3m wrap.....wat is dat wat does it protect and where do i buy it.....ohh and how do i install it???

lol hijackkkkk :crazy:

yeah i was gonna say that, but i was going to be nice and answer his question too lol

get.... more....pics..... :rofl:

Yep, the guys on Scion Life thats us. Lol That body kit is siiiiiick! Where did you get it and what kind is it. I'm lovin it!!!

Just read all of the thread and you will answer your own question...

Looking good sooo far! :clap:

Here are pics of the side skirts mounted up and painted...
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0053.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0049.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0044.jpg

However there are problems with the sideskirts, which has now become my winter project :tap: I guess I'm going to mold them in because this will do for now, but definitely not going to cut it for next spring...

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0042.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0041.jpg

This is whats going on with the front and rear bumper. The front bumper has grilles for the foglight area and top grille which was supposed to fit the OEM grille but I guess someone screwed their mold along the process :tap: The rear has been painted and needs wet sanded and buffed, and then I get my car back just in time for the rain :doh:

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0050.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0048.jpg

Not sure what I'm going to do for the lower grille, I was hoping to fit a sheet of plastic honeycomb material like factory but i can't seem to find it anywhere. Not even sure what its called but if anyone has any ideas I'm open to suggestions. For now it's going to have the black stainless stell honey comb mesh, but everything behind it has been sprayed black so it won't be too bad. I was also thinking about getting another lower OEM grill and cutting it to fit INSIDE the bumper and put a thin strip of robber around it and screwing it in some how. The OEM lower grille is long enough but its not quite tall enough leaving me a 1/8" gap that I'd need to seal and I think the rupper strip could make up for that. We'll have to see, so if anyone has the OEM lower grille I'll take it off your hands haha... I also have projector fog lights that I'll be putting in when i get the car back from the shop.

its looking nice... :clap:
i wouldnt let leave the side skirt like that though.
surely they can fix it!

I have a OEM bottom grille. Hit me with a pm

yeah, they said they can, by molding or adding and removing fiberglass like with the rear bumper but this paint work already ran me about $500 over my original invoice, so I'll add some more money to the piggy bank and fix it with my December commission check. I had to pull money from my turbo fund to finish this part of the project :(

However there are problems with the sideskirts, which has now become my winter project :tap: I guess I'm going to mold them in because this will do for now, but definitely not going to cut it for next spring...

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0042.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0041.jpg

I TOLD YOU !!!!!!! thats exactly what my skirts looked like and every other buddy club 2 skirts. Im getting them fixed properly

My cars been back in the shop for 2 weeks now and i'm picking up my car today. So those skirts better be fixed properly along with the rear and front bumper.

nice. u pickin the car up today :P i didnt read it all i just like pictures lol

you'l lhave it for the next meet right>?

rolstc lemme know how much they charge you to fit those beeyatches

hey thats apple body shop! right?

no... thats automenders

I hope you aren't paying too much for labor. Lefty's droppin' ashes on your bumper.
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0053.jpg

please dont mold the sideskirts. it will crack. no matter how well its adhered, glued, or screwed, they always crack. just file and fill until you have a clean uniform gap. It will turn out much more pro looking, and will stay looking nice. other than that, looking good.

yeah thats what i was thinking, i'm just gonna have them add and remove glass as necessary... probably do that within the next few months, if they would have told me how they fit I would have had them do it now, but since I'd have to pay them to sand, re-prep, lay the glass, let it set blah blah blah I don't have the fundage right now lol

watching! :bow:

is it done? :lalala:

I hope you aren't paying too much for labor. Lefty's droppin' ashes on your bumper.
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0053.jpg

ROFL :rofl:

on a side note:i think you helped me decide on just the rs1 cf lip kit.

glad i could help :P Yeah if only veilside made a kit for our car, than that thing would fit perfectly :love:

I miss my veilside kit :cry:

On another side note about the rs1 lip kit, I know the sideskirts need some attention on that kit as well, so set aside some extra cash for labor there. Just giving you a heads up

Well ladies and gents, here she is in all her glory (minus the stock rims lol)

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0070.jpg
As you can see they got a seamless fit for the rear :love:
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0069.jpg
And to imagine how terrible this looked before they fitted the kit lol...
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0068.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0067.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0066.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0065.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0064.jpg
http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0063.jpg

Needs a front mount... STAT!

someone was supposed to call me monday about that :lalala:

thats awesome! now you need to turbo so you can have that hole filled with an intercooler :D

thanks :) I loved it too, they have a couple minor things to fix but other than that its pretty much good to go

P.S. I have a grille getting made to go int here til the turbo goes on, and I'm also moving that neon, the shop couldn't find anywhere to mount it but i'm pretty creative I'm sure I can dream up somethin lol

lol sounds great! i can't wait to see it finished GL

looks good. :) i agree with the others that that bottom needs to be filled :wink: but it looks like somethin is weird with the top grill.. and i think some M3 foglights would looks sick :P

Just in time for Ernesto.

I can't wait to see some Evo 6's on there. Are they backordered like the 5's?

looks good so far!! good job! :clap:

yeah, friggin rain wtf lol... anywho dave its looks crooked, thats what i thought buts its because the car was parked one angle, i was another and i was using my cell phone for pics... looks ok in real life lol

:(

I just don't think the M3 style bumper flows. Had to say it again

its ok, we all have our own tastes, i respect you for being tactful about it :P lol its all good. Matt the evo 6s will be here tuesday and my corbeau seats are now in :)

:love:

Nice.

Are they Chris' Corbeaus?

yup

Sweeeeeet.

yup, i'm still adjusting the harnesses, skinny tall fuks like me weren't meant to have racing seats lol

Psssh. Tell me about it. I need rubberbands to hold me in.

i'm trying to figure out a way to SAFELY shorten the straps, and then i gotta figure out how to turn off the air bag light so that my bags will work... I'm too lazy to search right now, I'm sure its on this forum somewhere :rofl:

Here's another update. It now has the fog lights and a custom grill installed. You can't see the seats though. Tomorrow when I put the Evo 6s on I'll have a mini photoshoot with it and you guys can give me the final eval lol...

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0075.jpg

Only Complaints.... so far:

1) Sideskirt fit
2) WTF is wrong with my top grille????? Its shorter on one side than the other

is it me or do the colors look different, lilke 2 different whites??

i think its my phone, it just doesn't pick up on the colors well since the lens is so small...

thats what i was figuring, lens on a camera :D
but other than that its looking good man..how much it cost you total to w/ all the peices and paint??

call me when you get your stuff all on, I know a good place in wrightsville for some pics

pieces and all... Hmmmm I had some extra body work get done so it's kinda hard to say but ball park like $1800-$2100 for paint and pieces not counting my extra work...

call me when you get your stuff all on, I know a good place in wrightsville for some pics

Will do, my rims come in tomorrow, I gotta find a place to mount and balance them pretty cheap :nails:

The top of the bumper (above the grille) looks warped. If you look at the line between the bumper and the hood you can see why the grille looks "shorter" on the left side. I don't know anything about bodykits so I can't give any advice on how to fix it, but it's really not that noticable.

I was bored in photoshop... here's another

http://i84.photobucket.com/albums/k30/tc2nut4/Tcweird.jpg

The top of the bumper (above the grille) looks warped. If you look at the line between the bumper and the hood you can see why the grille looks "shorter" on the left side. I don't know anything about bodykits so I can't give any advice on how to fix it, but it's really not that noticable.
yeah but it'll bug the ____ outta me until i get it fixed...

I can't wait to see the Evos.

yeah I think i'll love it then lol. Then I might actually bother to take out my digital camera and use that instead of my friggin cell phone lol

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0081.jpg

And yet another shot, notice the stockies lol. They are almost bald, one has a nail, another has a screw, and they are filthy, can you tell i'm anxiously waiting for my Enkeis to come in lol???

http://i84.photobucket.com/albums/k30/tc2nut4/SSPX0067.jpg

The sideskirts and rear bumper flow together pretty well but I'm really not sure about the flow with Tury's M3 front bumper. I guess I'd have to see it personally.

Considering the body parts you have chosen as a mixed combo, I kinda know the direction you're going with your cars setup. You seem to want the sophisticated look rather than the totally aggressive look. Aggressive is good but, in my opinion, too much of it doesn't look all great on TC's. Yours is a clean setup that I like and I may be doing the same setup but without the M3 front bumper. I'm thinkin' about the viniati fierce lip front bumper.


http://viniati.com/images/viniati/viniatifierce_a.jpg

It flows yeah?
Well I'm glad you're car was the guinea pig. Glad I came across this on this site.
SCIONLIFE RULES!!!

[/img]

glad i could help. The fogs lights are now in and a custom grill is now in the lower grille and IMO it looks a 1000x better.

But you're right, sort of wanted a simple clean look without all the craziness. I think the front lip looks nice when its molded correctly. Good luck

Damn, that rear bumper makes the stock wheels look puny.

Get more pics. with your digital camera when it gets sunny down there.

I should get some time tomorrow with the digital and my enkeis on...

It's supposed to rain in the AM :(

WTF????!!!! Why tomorrow??? I get my purrrtyy rims put on tomorrow....

Hopefully by the time you get them mounted it will have stopped raining.

looks pretty good? Would look better when rims are on!

So much for sunny pictures in Wrightsville. :(

yeah really... io got my rims sitting in the back of my car, can't find anyone that will mount and balance "custom" rims

Are you serious!?

Make sure you find someone who knows what they are doing so that you don't get scratched wheels. My stock wheels were all marked up from day one...I guess some idiot at the factory didn't know how to balance rims and tires.

Did you get the hyperblack Evos?

yessir

http://i84.photobucket.com/albums/k30/tc2nut4/100_4502.jpg

I got scared when I saw this shot...it looked like you put a big a$$ wing on your tC.

What kind of paint are they using? I dont like the fact that they are burning it in up top. I know with the brand we use (sherwin williams automotive) it always shows up later on and looks like hell no matter how much you polish it. But good luck.

hmmm not sure off hand what paint they used... i know it wasn'y SWA... please elaborate on "burning it in"

hmmm not sure off hand what paint they used... i know it wasn'y SWA... please elaborate on "burning it in"

Burning it in or Melting it in, which ever you want to call it is what you do when you dont paint from the qtr panel all the way over the roof rail down the windshield post.

you basically tape it off like in the pic above and you stop your cleacoat just short of the paper. Kinda like when you blend basecoat but with the clear so its a little dry. Then you take your blend solvent(which burns it in/melts it)(SWA uses a product called BS10) and spray it over the the dry spray of the clear coat and it basically melts it in with the old clear. When its done right it doesnt look bad at all but will show up later down the road. It will look like dry spray. Im not sure if other paints like ppg or sikkens or dupont do it but i know that sherwin does this. Hope this helps.

thanks... i'll ask, i'm going in tomorrow to have them do a better mount of the passenger side sideskirt

just to add.. i see you got that gap going on your hood and front bumper...

Make sure you use the stock bracket from the stock front bumper... it'll push up that gap and gap will be no more..

just to add.. i see you got that gap going on your hood and front bumper...

Make sure you use the stock bracket from the stock front bumper... it'll push up that gap and gap will be no more..

PS>.

Nice bumper!!! hahaha

haha you're not biased towards it are you... thanks for the help on that :)

Here's some updated pictures. She's dirty so no comments on the dirt :P

I'll clean her when it stops raining... Damn hurricanes

http://www.scionlife.com/gallery/personal/26229_19.jpg

http://www.scionlife.com/gallery/personal/26229_16.jpg

http://www.scionlife.com/gallery/personal/26229_18.jpg

http://www.scionlife.com/gallery/personal/26229_17.jpg

http://www.scionlife.com/gallery/personal/26229_15.jpg

http://www.scionlife.com/gallery/personal/26229_6.jpg

lol, like I said, those rims look just like stock. should have got the evo5's

yeah i know they do.... thats kinda why i like them lol

Sexy!!! What kit is that? Looks like an M3 front end.

Thanks!!! Its a mis of kits: Viniati M3 Front, Buddy Club 2 Sides, Drifter 2 Rear

Nice, I love the front. It really takes a second look to make sure it's not an M3. How low are you from stock? Any thoughts of getting the Viniati wing?

i never really measured before installing but i'd say 1.5"-2" is my best guess. No Viniati wing for me... maybe the kaminari one down the road but for now I gotta save for some more body work and a turbo :love:

is it me or does the fitment look off

it is a little... thats the other body work comin up lol

Looking good. Those fog lights fit PERFECT!!

Only complaint with the front is where the top grill opening is, it doesnt look symetrical. Maybe its from the picture being resized to put on the website.

no its off... i haven't talked to Viniati about it but I am going too... If anything I expect partial reimbursement so I can get the shop to fit it the rest of the way... I'm a poor college kid lol so unplanned expenses hit me like a freight train :(

Deffinetly have them do something. It would suck for them to say return it tho.

i'd tell them to eat $hit and pay for the shipping both ways, and tho repaint it lol... and pay for the tickets i'd get driving around with no bumper :rofl:

looking good man :D
love the new shoes

thanks! Gotta represent with the enkeis haha

I think I just......

Yep, I did. lol

Nice rims!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

looks good bro

thank you!

great choice in bumper! :wink:

what foglights are you using? link please?

heh heh your's has a prettier picture haha... does yours have that sag in the grille area too???

PS i'll PM you the link when I get home... i have the invoice in my desk somewheres lol

heh heh your's has a prettier picture haha... does yours have that sag in the grille area too???

yeah it does. and also the gap between the hood and the bumpter. but it's not too bad after putting the CF hood on. I also notice that the side "clips" that sit right under/behind the lights don't stay clipped on very well.

yeah ditto... i've had to pop mine back in already...

now thats what im f*cking talking about! :clap:

those rims do look stock, but they also do look sweet a$$ sweet!

overall a A+ in my class!!!

Why thank you sir... Yours and everyone else's scomments mean a lot!!

I like the wheels because they are not flashy, but look kick a$$ at the same time.

Where did you order them?

lol, like I said, those rims look just like stock. should have got the evo5's

Those are nice wheels! If I could find the stockers style in 18's Id get em.

edgeracing.com

Really!? I thought they mounted them :(

Nevermind. I assume you got tires somewhere else. :doh:

yessir

I remember the time I had sex on those seats... :lol:

j/k

Looks tits brother.

I remember the time I had sex on those seats... :lol:

j/k

Looks tits brother.

With Chris?!

ahhhh.... i'm steam cleaning them tomorrow!!!!

Good call.

I remember the time I had sex on those seats... :lol:

j/k

Looks tits brother.

With Chris?!

My girlfriend and I. She owned those seats before chris..

:rofl: hahaha priceless!

I remember the time I had sex on those seats... :lol:

j/k

Looks tits brother.

With Chris?!

My girlfriend and I. She owned those seats before chris.. :relief:

or could it be a cover up??? hmmmmm....

or could it be a cover up??? hmmmmm....

You wish.

Looks very nice!

whoa. those seats. flashback.

did you have any other body work done??? looks like the door and fender dont line up. plus your car is white making it much easier to spot. itll look good once you fix evrything, if you can....

http://www.scionlife.com/gallery/personal/26229_18.jpg

I think it doesnt line up because of the poor resizing of the picture

I think it doesnt line up because of the poor resizing of the picture

yeah. everyone should use IRFANVIEW! it's the best damn image viewer out there! it's fast, has tons of features, and it's FREE!

http://www.irfanview.com/

just make sure you use the "RESAMPLING" option if you resize an image to keep it crisp and clear without jaggies.

picture resizing does not make up for bad work ...nice fitment :rofl:

looks like my stock upper grille found a good home :D


nice tC dude ;)

thank you sir :)

wow....very nicely done! Love it! :clap:

Gracias!

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0858.jpg

Any more pics?

http://i84.photobucket.com/albums/k30/tc2nut4/DSCN0858.jpg

Wow, I just got a semi.... :P

Nice!!

hahahahahah...semi..... haha thats a good one