I think this is the new ANZO headlights. Can somebody please confirm?

http://cgi.ebay.com/ebaymotors/04-05-06-SCION-tC-TWIN-HALO-LED-PROJECTOR-HEADLIGHTS_W0QQcmdZViewItemQQcategoryZ33710QQihZ019QQitemZ290039085201QQrdZ1

Looks better if it is black and NO amber side marker.

Yeh I think so, any idea if they come with turn indicator bulbs

Why is this in the Boston Metro area?
Mods can you move please?

:rofl:

move this b1tch!!!

i like the way these headlights look, i only wish they came in black, i wouldnt even care if an ebay store had them as a no namer i would buy them and replace once better ones came out. Has anyone seen these in black?

I like them.. but they kinda look like mine.

I got em ...

totally worth the price...had em for like 3 weeks now...hasn't fogged..yet..lol

the halos themselves are pretty bright...
http://i113.photobucket.com/albums/n237/photoman007/IMG_4766.jpg
http://i113.photobucket.com/albums/n237/photoman007/IMG_4767.jpg

got em just in time for my bday :D

a tru plug n play lights... it re-uses the stock turn signals, eveything else, all the bulbs were pre-installed in the lamps...just need HIDs now..lol

Yes these are ANZO light.. i think someone on YSTC bought the light and the shipping label from ANZO was still there.. So i guess these guys on ebay are just 3rd party seller.

those the anzo headlights in chrome...but im waiting on them in black them i am going to buy them !!!

wow... so nice!!

can you show me the cut-off?

Is Anzo headlight HID compatible? Some Halo projectors are not.

Is Anzo headlight HID compatible? Some Halo projectors are not.

these are not compatible for HID from what i was told..they are already pretty bright..no need for HID

where u hear that from?
the halos are brighter than the actual projector...i still need o align them..the cut off is kinda blah right now

where u hear that from?
the halos are brighter than the actual projector...i still need o align them..the cut off is kinda blah right now

how do you align them? I've had mine for a bit now and the leds on the pass side all burn out and the driver side one set of 3 leds are gone also. The light arcs in like a semi circle and when i get close to my garage door, the beams look like v's. does that mean its not aligned?

HIDs, I bet with some custom mods to the rubber cap yuo can stick some HID bulbs in there. Cause some H7 bulbs wont fit, the hole is too small. :doh:

What size bulbs do the headlights take?

What size bulbs do the headlights take?

h7 for low beams, and i think h6 for high. i know an aftermarket h7 i got from my seller does not fit. use only 12v 55watt bulbs.

where u hear that from?
the halos are brighter than the actual projector...i still need o align them..the cut off is kinda blah right now

how do you align them? I've had mine for a bit now and the leds on the pass side all burn out and the driver side one set of 3 leds are gone also. The light arcs in like a semi circle and when i get close to my garage door, the beams look like v's. does that mean its not aligned?

HIDs, I bet with some custom mods to the rubber cap yuo can stick some HID bulbs in there. Cause some H7 bulbs wont fit, the hole is too small. :doh:

there are silver knobs behind the headlight to adjust them...
im a little ____ed tho..the 3 outta the 6 LED's in the driver side eyebrow is startin to flicker :gun: :flame: :evil:

its starting to sound like alot of problems are coming out of these headlights. I myself think they look bad ___ and want a pair in black so bad, but after seeing not 1 or 2 but quite a few people saying they have LED problems its starting to make me think if i want these or not. Going to a show and showing off some really nice headlights but not fully working is a little weird.

Is Anzo headlight HID compatible? Some Halo projectors are not.

these are not compatible for HID from what i was told..they are already pretty bright..no need for HID

HAHA what do u mean not compatible, HID bulbs come in every size bulb fitment, and projectors are the perfect housing for HIDs because they have a nice cutoff

its starting to sound like alot of problems are coming out of these headlights. I myself think they look bad butt and want a pair in black so bad, but after seeing not 1 or 2 but quite a few people saying they have LED problems its starting to make me think if i want these or not. Going to a show and showing off some really nice headlights but not fully working is a little weird.

i like them because of the OEM look. I dont like the other ebay ones that look as if they were from a mini cooper or something. a tC is japanese and shouldnt look like a euro. Besides its ok when you add some eyelids to cover the leds. The leds are just ugly and take away from the projectors and halos. I say get them with some polyurethane eyelids. cause if you get vinyl and stick them on, if the leds work, it will shine right through a little. So I need to replace my vinyl with some poly.

here are some pics.

http://i127.photobucket.com/albums/p129/NightShadeR2B/pic112606_2.jpg
http://i127.photobucket.com/albums/p129/NightShadeR2B/pic112606_3.jpg
http://i127.photobucket.com/albums/p129/NightShadeR2B/pic112606_4.jpg
http://i127.photobucket.com/albums/p129/NightShadeR2B/pic112606_1.jpg

these low beam bulbs are made in germany and are 12v 55w. Im waiting to save a little cash to get some 6000k h7 hids for these from ebay for like 130$. to install you just need to cut into the rubber cap or make one to fit the bulb harness through.

yea...so like...3 outta the 6 LEDs on each eyebrow is out... fack

yea...so like...3 outta the 6 LEDs on each eyebrow is out... flip

Yea the first start to flicker and then after a day or two they completley go out. I just took mine off. But make sure you dont take them out with the car on you'll blow out a fuse if you do.

Its simple to remove them and replace them with any color you want. Just reach behind and pull on them. And WALLAAAAAAAA !!

yea...so like...3 outta the 6 LEDs on each eyebrow is out... flip

Yea the first start to flicker and then after a day or two they completley go out. I just took mine off. But make sure you dont take them out with the car on you'll blow out a fuse if you do.

Its simple to remove them and replace them with any color you want. Just reach behind and pull on them. And WALLAAAAAAAA !!

its that easy to take the LED's in the eyebrows out?

wow, the leds can be taken out???? Hum, that will be my next project on my day off. can it easily be unpluged so that it doesnt light up? I dont really like the leds.

i saw probes in a set yesterday.

how do you take the leds out?

What's up everyone! I have a 06 Tc Special Edition. I just bought a pair of projector headlights with a 8000k hid kit. I haven't received them yet. I was wondering if I would have to remove the front bumber for installation or just unscrew the headlights? Thanks!

What's up everyone! I have a 06 Tc Special Edition. I just bought a pair of projector headlights with a 8000k hid kit. I haven't received them yet. I was wondering if I would have to remove the front bumber for installation or just unscrew the headlights? Thanks!

You have to take the bumper off.

lol that guy's nuts.....increasing the font size and also bolding the words -_-"

yeah. nuts. lol

....after taking the bumper off take the side screw and top 2 screws off, make sure you unplug the wires first. all of them. Then take a screwdriver and pray that thing off where the tab is.

What's up everyone! I have a 06 Tc Special Edition. I just bought a pair of projector headlights with a 8000k hid kit. I haven't received them yet. I was wondering if I would have to remove the front bumber for installation or just unscrew the headlights? Thanks!

Do you need glasses too????

Lord.

I too have heard that they dont hold HID's, but anything is possible, if i can fit a double din in a Jeep, i can fit HID's in a headlight.

How do you get the bumper off? Is it pretty easy?

yeah, but could be a pain to put back on by yourself. You need to take the screws inside the wheel well out, the screws and plugs under the hood, and the screws beneath the bumper. Just pull it out, but be gentle. tape up the fender where the end of the headlight and space between the fender and bumper is. you dont want to scratch it while taking the bumper off and putting it back on. trust me i know. :( lol

How long does it take to do, could a person who is terrified to install stuff on his own do it?

sure, if you want when you do go for the install let me know ahead of time and i can come up with a diagram, or better yet search, i know there is a DIY for takin the bumper off. :)

Ok, ill keep you posted!

heres the "HOW TO" link
enjoy and good luck, anything else, dont hezitate to ask me in a PM or something.

HOW TO: Fremove Front Bumper (http://www.scionlife.com/forums/viewtopic.php?t=44668)

Excellent, thanks so much!

np, anytime, i'll help ya if ya need it. i know i could use help when i need it so how about I add you to my protoyping list of people to help advise and etc on my spring project? just pm me an aim and e-mail so i can add ya to the list.

Anyone who have these?

http://images.channeladvisor.com/Sell/SSProfiles/60000222/Images/5/PRO-YD-TTC04-HL-BK.gif

I saw these too, kinda curious, they are like upside down anzo's

watching...

BUT, no CCFL, just LED Halos...

yeah, even though the whole ring lights up, the power of photoshop...

I wonder if the bottom leds are more sturdy though...