I work at a machine shop and I made 1/2 inch hub spacers, not wheel spacers. for the XB.
These are the kind that go between the rear arm and the hub.
they are made out of 1/2" thick 6061 T-6 aluminum.
I will also include grade 8 bolts to replace the factory ones.
i am thinkin in selling them for $55 shipping included.
Any takers?

Then you have Shims, got any pics ?? Sean

They'll fit the xA too, right? :D

I'm assuming yours is more or less just like Van's at One Ton? (which is $65 w/shipping - and flawless I might add)

Is yours a true 1/2" or 10mm (which is 3/8")?

Detailed instructions for those non-mechanically inclined folks who keep insisting on working on their own cars?

What's the outside shape? round? square? trapazoidal that matches the hub shape? (like One Ton's)

GIVE DETAILS! LOTS!

--- hub spacers involve modifying the most critical safety area on your vehicle.

Hey dude Im in Hawaii and the other guy is out of those shims. A lot of guys in Hawaii are going crazy with XBs since our dealer opened up 2 weeks ago. If oyu could show me some pics I be happy to buy them from you and get other guys here in hawaii to buy them to.

If you guys have seen one ton garage spacers, then you pretty much have seen the ones I make. the difference is the width. Mine are made out of 1/2" thick aluminum (12.5mm)
I already installed the first set I made on my XB and I want to make sure that there are no problems with 1/2" spacing before I start selling them.
No modification needed, you don't have to cut anything, they instal in a few minutes.
Just gauging interest in the spacers at this point.
Thanks.

cool...where in Florida are you located?

Hey dude how wide are your rims and what offset are they? Do yu have any rubing problems with four people in your ride

yeah, i would like to know were in florida you are to, i live in the tampa/brandon area and if you live nearby than that would eliminate the need for shipping(and i could have them sooner).

you got a website? Can;t sell without a website!! :lol: J/K man Hey do you have a pic of it? Pics sell better, just look at ebay! Also, are there instructions on how to install them? Are they in a box or are they loose? Need the info for future refrence! :D