i tried the search button and all that but..

ok i have 215/45/R/17s and i would like to lower my box but it is rubbing on the inside of the wheel well now just a little but id like to lower it a inch or inch and a half do you think it would get worse
also
if i go that low will i have to get a camber kit?

i will have some pics up of my box very soon i have to say it looks very nice sittin on some GF-1s 17inch

nobody knows?
or am i posting in the wrong area or something???

I have that same size tire, but...

Every tire mfr. actual size is different-even for the identical tire size.

Also, what offset rims do you have? That will make a big difference. Mine are 17x7, 42 offset. Zero rubs. I am at stock height. The tire (Falken Ziex512) is real close to the rear swing arm, but no rubbing.

Maybe more info will help others to help you.

Yes we need more info to give an answer. When I had that size tire with 1.5 inch drop and the 10MM One Ton rear spacers I would rub slightly on the pass side front wheelwell just on the outer edge of the tire. I have since removed the spacers and am running the TRD 18' with 215/35/18 and do not anticipate any more rubbing after everything is put back on for the spring and summer.

get correct sized tires.

217/40/17 or 205/45/17