Dezod Stage I Dyno + Tune
Thread Starter
Senior Member



SL Member
Team ScioNRG
Joined: Apr 2005
Posts: 4,113
From: Goldsboro, NC
Headed out yesterday with a buddy to drive 1hr 1/2 to the nearest dyno facility to get tuned. Alot of fun putt putting down I-95 trying to avoid boost
GodSpeed Auto Salon in Fayetteville, NC.
Ang tuned the car and did a wonderful job! Did about 15-20 pulls!!!
After about the 10th one my exhaust was a literal flamethrower! After about an hour on the dyno we did some street tuning for about another hour. Ang tuned the car very consistantly at a very conservative 11:1 (11.0 AFR). From 5500rpms to 6200 AFR drops to 10.5 just for added security. When i left, ang didn't give me all of the dyno run print outs and i didn't realize til i got home
. I do have one however that was about somewhere in the middle of tuning:

4th Gear pull
250whp/248wtq
AFR's were somewhere around the low 10's here. The final pull on the final tune was around 254whp/251wtq. Not much gain over this graph but the plots were much smoother. Everything was tuned to be conservative and reliable.
-Dezod Stage I
-8lbs of boost
-Megan racing 2.25" mid-pipe
-HKS axle
I tripped out when everyone at the shop told me i was the 4th Dezod tC that they've seen this month! Plus for added fun, there was a BSP tC in their shop with a blown motor with a Dezod Stage I kit on it too!!! Guy blew his motor because he forgot to plug up his wastegate
Major booboo. 390whp @ 23lbs = *POP*
GodSpeed Auto Salon in Fayetteville, NC.
Ang tuned the car and did a wonderful job! Did about 15-20 pulls!!!

4th Gear pull
250whp/248wtq
AFR's were somewhere around the low 10's here. The final pull on the final tune was around 254whp/251wtq. Not much gain over this graph but the plots were much smoother. Everything was tuned to be conservative and reliable.
-Dezod Stage I
-8lbs of boost
-Megan racing 2.25" mid-pipe
-HKS axle
I tripped out when everyone at the shop told me i was the 4th Dezod tC that they've seen this month! Plus for added fun, there was a BSP tC in their shop with a blown motor with a Dezod Stage I kit on it too!!! Guy blew his motor because he forgot to plug up his wastegate
Major booboo. 390whp @ 23lbs = *POP*
Sweet
call the shop and have them email you the run files...
then download the software http://www.dynojet.com/downloads/software.aspx
call the shop and have them email you the run files...
then download the software http://www.dynojet.com/downloads/software.aspx
Thread Starter
Senior Member



SL Member
Team ScioNRG
Joined: Apr 2005
Posts: 4,113
From: Goldsboro, NC
Originally Posted by rhythmnsmoke
Good #'s. I was pushing the same on about 7lbs of boost. So, when are you going to get some vids of her?
Originally Posted by Prototype_xB
Originally Posted by rhythmnsmoke
Good #'s. I was pushing the same on about 7lbs of boost. So, when are you going to get some vids of her?
you using USB to transfer the vid.
Thread Starter
Senior Member



SL Member
Team ScioNRG
Joined: Apr 2005
Posts: 4,113
From: Goldsboro, NC
Originally Posted by toyotaracer9
was this the best dyno sheet ? looks prettyu good , 1/4 times any time soon ?
Thread Starter
Senior Member



SL Member
Team ScioNRG
Joined: Apr 2005
Posts: 4,113
From: Goldsboro, NC
Originally Posted by rrimportracer
wow that dyno has nasty holes in it, hopefully its all better now
Originally Posted by Prototype_xB
Destoryed a mildly modded 06 GTi tonight. (bov, exhaust from all i could tell). I mean destoryed 




