Notices
Scion xB 1st-Gen Aero & Exterior Aero parts and exterior dress items...

NEW BLING UNDER THE HOOD- Thanks EZ-BAKED! - *56k*

Thread Tools
 
Search this Thread
 
Old Jan 30, 2007 | 10:58 PM
  #1  
salteen's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Apr 2006
Posts: 1,333
From: Stafford, VA
Default NEW BLING UNDER THE HOOD- Thanks EZ-BAKED! - *56k*

I bought this bB battery clamp from EZ-BAKED. He cut the design out of 12 guage steel and it's a 2-peice design (the green is one peice, the raw steel is the other.) It's VERY high quality and an awesome product and the only bB style that exists as far as I know (so that makes me feel special)


Cleaned my engine compartment (because I got really tired of having a filthy car) and it's all shiney. I also have a new Injen Short Ram hiding in there but I couldn't get the camera to take a decent pic of it because of it's freakin akward angle.:
Old Jan 30, 2007 | 11:21 PM
  #2  
iheartzombies's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
iTrader: (1)
 
Joined: Jul 2006
Posts: 3,307
From: Dirty South
Default

Nice
Old Jan 30, 2007 | 11:26 PM
  #3  
Xb_Stud's Avatar
Senior Member
10 Year Member
5 Year Member

SL Member
 
Joined: Sep 2005
Posts: 1,177
From: ScionApocalypse
Default

I like. Have to think about this one....
Old Jan 31, 2007 | 02:40 PM
  #4  
salteen's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Apr 2006
Posts: 1,333
From: Stafford, VA
Default

thanks for the comments guys
Old Jan 31, 2007 | 03:45 PM
  #5  
smoke20's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Scion Evolution
 
Joined: Feb 2006
Posts: 1,293
From: Pittsburgh, PA
Default

Someone also sells a similar bB hold down on ebay, but each time one comes up I get outbid pretty badly.
Old Jan 31, 2007 | 03:45 PM
  #6  
Xb_Stud's Avatar
Senior Member
10 Year Member
5 Year Member

SL Member
 
Joined: Sep 2005
Posts: 1,177
From: ScionApocalypse
Default

Is the green part just painted steel?
Old Jan 31, 2007 | 04:02 PM
  #7  
salteen's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Apr 2006
Posts: 1,333
From: Stafford, VA
Default

Originally Posted by Xb_Stud
Is the green part just painted steel?
Yep. It's painted and cleared.
Old Jan 31, 2007 | 04:36 PM
  #8  
EZ-BAKED's Avatar
Senior Member
10 Year Member
5 Year Member
Club One
SL Member
 
Joined: Mar 2006
Posts: 1,414
From: Into something Custom
Default

Originally Posted by smoke20
Someone also sells a similar bB hold down on ebay, but each time one comes up I get outbid pretty badly.
Yea i too tryed to buy that one on e-bay and was outbided so I made my own. the e-bay one is 1/4" aluminum and cut most likley on a watter jet same as myn. I used 2 layers of 12ga stainless steel on myn with some paint and polish I thought it looked better than the e-bay one. I made a transformer style too plus front emblem for xb and rear badge
Old Jan 31, 2007 | 04:42 PM
  #9  
EZ-BAKED's Avatar
Senior Member
10 Year Member
5 Year Member
Club One
SL Member
 
Joined: Mar 2006
Posts: 1,414
From: Into something Custom
Default

thanks for the wright up Salteen.
Old Jan 31, 2007 | 04:48 PM
  #10  
salteen's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Apr 2006
Posts: 1,333
From: Stafford, VA
Default

Originally Posted by EZ-BAKED
thanks for the wright up Salteen.
Yep, no prob
Old Jan 31, 2007 | 05:42 PM
  #11  
grizzly_choppers's Avatar
Senior Member
10 Year Member
5 Year Member

Scikotics
SL Member
Scinergy
 
Joined: Jul 2004
Posts: 2,235
From: Wilson Scion (IA)
Default

So...items for sale then?

Any chance of doing one with a position for the cable hold down bolt? That would be really nice.

You can send me a PM if you like.

Good lookin' part though!

-Alex
Old Jan 31, 2007 | 06:06 PM
  #12  
keoki's Avatar
Senior Member
5 Year Member
SL Member
 
Joined: Apr 2006
Posts: 2,785
From: HAWAII 50
Default

looks nice! just need 2 paint the hold down nuts and bolts!
Old Jan 31, 2007 | 06:11 PM
  #13  
EZ-BAKED's Avatar
Senior Member
10 Year Member
5 Year Member
Club One
SL Member
 
Joined: Mar 2006
Posts: 1,414
From: Into something Custom
Default

Originally Posted by grizzly_choppers
So...items for sale then?

Any chance of doing one with a position for the cable hold down bolt? That would be really nice.

You can send me a PM if you like.

Good lookin' part though!

-Alex


Yes for sale. the cable hole I will look into I dont think its really needed . I had no change in idel or performance after removing it.
Old Feb 1, 2007 | 08:00 AM
  #14  
tclikewhaa's Avatar
Member
10 Year Member
5 Year Member
SL Member
 
Joined: Sep 2005
Posts: 54
From: Within the Perimeter
Default

pretty neat, i like that transformers one haha
Old Feb 3, 2007 | 02:42 PM
  #15  
grizzly_choppers's Avatar
Senior Member
10 Year Member
5 Year Member

Scikotics
SL Member
Scinergy
 
Joined: Jul 2004
Posts: 2,235
From: Wilson Scion (IA)
Default

Originally Posted by EZ-BAKED
Yes for sale. the cable hole I will look into I dont think its really needed . I had no change in idel or performance after removing it.
I also run my cruise cable through that bracket and it keeps things tidy under the hood. That's the main reason I want it. I have enough rogue wires in there and I try hard to keep the stuff bundled up as often as possible.

Like I said, hit me up with a PM or something if you can swing it.

Thanks!

-Alex
Old Feb 4, 2007 | 10:12 AM
  #16  
hyrev's Avatar
Member
10 Year Member
5 Year Member
 
Joined: Feb 2007
Posts: 23
From: Tokyo, Japan
Default

Originally Posted by EZ-BAKED
Originally Posted by smoke20
Someone also sells a similar bB hold down on ebay, but each time one comes up I get outbid pretty badly.
Yea i too tryed to buy that one on e-bay and was outbided so I made my own. the e-bay one is 1/4" aluminum and cut most likley on a watter jet same as myn. I used 2 layers of 12ga stainless steel on myn with some paint and polish I thought it looked better than the e-bay one. I made a transformer style too plus front emblem for xb and rear badge
v cool.
Old Feb 4, 2007 | 08:31 PM
  #17  
caphillcruz's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Aug 2005
Posts: 161
From: Denver, CO
Default

Nice look guys..
Heres the one i bought on Ebay..Gives a nice look


[img][/img]
Old Feb 4, 2007 | 08:39 PM
  #18  
caphillcruz's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Aug 2005
Posts: 161
From: Denver, CO
Default

heres some new bling i got
[img][/img]
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikochu
Scion xA/xB 1st-Gen ICE & Interior
34
Jun 30, 2012 11:28 AM
Toy_xbox
Scion xB 1st-Gen Owners Lounge
54
Nov 23, 2009 01:39 PM
jct
Off-topic Cafe
10
Nov 27, 2005 04:48 AM
johnso56
Scion xA/xB 1st-Gen Wheel & Tire
6
Oct 11, 2005 02:56 PM
kshymkiw
Scion xB 1st-Gen Owners Lounge
39
Dec 15, 2004 10:04 PM




All times are GMT. The time now is 02:16 PM.