arinvolvo
12-12-2003, 12:01 AM
This info was originally posted by Scionic. I thought it was important enough to be a sticky...This is being posted as strictly informational. If you wish to comment on this, please visit the original thread here.http://www.scionlife.com/forums/viewtopic.php?t=4141
Scionic posted:
Everyone is talking and no one is doing so I took it upon myself to gather some of the major intakes on the market and take them for a dyno run.
First off before I go off on any information I would like to give major props out to
Chris and his Crew at HOOK-UPS Import Tek in Upland for helping me find out the truth. Without Chris's expertise on dyno testing and his calibrated DYNOJET none of this would be possible. He's very interested in helping out the Scion community so anyone needs anything please hit him up. He supported us and we should support him!!!!
Also props to:
Steve @ bBist.com for directing me to HOOK-UPS Import Tek. If you all don't know then check out the cool stuff that www.bBist.com offers.
Also to these people/companies for donating/lending intakes to the cause:
Dude w/ the AEM (Still in the box from the dealership)
The Crew @ Injen (Thought it was cool what I was doing even if it didn't favor them)
Eric @ E.L. Prototypes (Sorry about the last minute notice)
John @ SPFR (Has since taken the intake back for further inspection)***EDITED***
Anyways...here it goes.
Time:
Dec. 10th @ 12pm
Place:
HOOK UPS Import Tek
8455 Loma Place
Upland, CA. 91786
909-373-RACE
People working on it:
Chris running the dyno
Me (Scionic) doing the installs
Richard (aka CamoScion) doing the picture taking
Subject:
My Blue Onyx xB 5 speed w/ ~10K miles on it
Stock w/ the exception of a grounding kit by Happies (OG Scionlife member that has since gone AWOL)
Dyno:
3 month old DYNOJET that is well kept, well calibrated, well placed (towards the front of the shop and facing outward toward fresh cool air)
Method:
3 runs per intake with cool down intervals of 3 minutes
Doing a simple Baseline measuring the peak HP & lbs/ft @ the wheels
All intakes are brand new still in sealed package
Intakes: (in the order that they were tested)
1. Stock
2. AEM Cold Air
3. Injen Short Ram
4. SPFR Cold Air
5. EL Prototypes Cold Air
Results: (to make it fair I compared the first run results)
Stock:
92.73 Hp / 95.82 lb/ft.
AEM:
95.86 Hp / 99.09 lb/ft.
+3.13 Hp / +3.27 lb/ft
Injen:
96.80 Hp / 100.59 lb/ft.
+4.07 Hp / +4.77 lb/ft.
SPFR:
94.15 Hp / 98.95 lb/ft.
+1.42 Hp / +3.13 lb/ft.
EL Prototypes:
95.75 Hp / 98.82 lb/ft.
+3.02 Hp / +3.00 lb/ft.
Here are the numbers from the three seperate dyno runs for each model.
AEM:
95.86 hp / 99.09 lb/ft.
95.63 hp / 98.68 lb/ft.
95.14 hp / 98.00 lb/ft.
Average: 95.54 hp / 98.59 lb/ft.
Injen:
96.80 hp / 100.59 lb/ft.
96.25 hp / 100.30 lb/ft.
95.93 hp / 100.48 lb/ft.
Average: 96.32 hp / 100.46 lb/ft.
SPFR:
94.15 hp / 98.95 lb/ft.
94.60 hp / 98.88 lb/ft.
94.23 hp / 98.72 lb/ft.
Average: 94.33 hp / 98.85 lb/ft.
EL Prototype:
95.75 hp / 98.82 lb/ft.
95.96 hp / 99.19 lb/ft.
95.56 hp / 99.34 lb/ft.
Average: 95.76 hp / 99.17 lb/ft.
Scionic posted:
Everyone is talking and no one is doing so I took it upon myself to gather some of the major intakes on the market and take them for a dyno run.
First off before I go off on any information I would like to give major props out to
Chris and his Crew at HOOK-UPS Import Tek in Upland for helping me find out the truth. Without Chris's expertise on dyno testing and his calibrated DYNOJET none of this would be possible. He's very interested in helping out the Scion community so anyone needs anything please hit him up. He supported us and we should support him!!!!
Also props to:
Steve @ bBist.com for directing me to HOOK-UPS Import Tek. If you all don't know then check out the cool stuff that www.bBist.com offers.
Also to these people/companies for donating/lending intakes to the cause:
Dude w/ the AEM (Still in the box from the dealership)
The Crew @ Injen (Thought it was cool what I was doing even if it didn't favor them)
Eric @ E.L. Prototypes (Sorry about the last minute notice)
John @ SPFR (Has since taken the intake back for further inspection)***EDITED***
Anyways...here it goes.
Time:
Dec. 10th @ 12pm
Place:
HOOK UPS Import Tek
8455 Loma Place
Upland, CA. 91786
909-373-RACE
People working on it:
Chris running the dyno
Me (Scionic) doing the installs
Richard (aka CamoScion) doing the picture taking
Subject:
My Blue Onyx xB 5 speed w/ ~10K miles on it
Stock w/ the exception of a grounding kit by Happies (OG Scionlife member that has since gone AWOL)
Dyno:
3 month old DYNOJET that is well kept, well calibrated, well placed (towards the front of the shop and facing outward toward fresh cool air)
Method:
3 runs per intake with cool down intervals of 3 minutes
Doing a simple Baseline measuring the peak HP & lbs/ft @ the wheels
All intakes are brand new still in sealed package
Intakes: (in the order that they were tested)
1. Stock
2. AEM Cold Air
3. Injen Short Ram
4. SPFR Cold Air
5. EL Prototypes Cold Air
Results: (to make it fair I compared the first run results)
Stock:
92.73 Hp / 95.82 lb/ft.
AEM:
95.86 Hp / 99.09 lb/ft.
+3.13 Hp / +3.27 lb/ft
Injen:
96.80 Hp / 100.59 lb/ft.
+4.07 Hp / +4.77 lb/ft.
SPFR:
94.15 Hp / 98.95 lb/ft.
+1.42 Hp / +3.13 lb/ft.
EL Prototypes:
95.75 Hp / 98.82 lb/ft.
+3.02 Hp / +3.00 lb/ft.
Here are the numbers from the three seperate dyno runs for each model.
AEM:
95.86 hp / 99.09 lb/ft.
95.63 hp / 98.68 lb/ft.
95.14 hp / 98.00 lb/ft.
Average: 95.54 hp / 98.59 lb/ft.
Injen:
96.80 hp / 100.59 lb/ft.
96.25 hp / 100.30 lb/ft.
95.93 hp / 100.48 lb/ft.
Average: 96.32 hp / 100.46 lb/ft.
SPFR:
94.15 hp / 98.95 lb/ft.
94.60 hp / 98.88 lb/ft.
94.23 hp / 98.72 lb/ft.
Average: 94.33 hp / 98.85 lb/ft.
EL Prototype:
95.75 hp / 98.82 lb/ft.
95.96 hp / 99.19 lb/ft.
95.56 hp / 99.34 lb/ft.
Average: 95.76 hp / 99.17 lb/ft.