Just got some more info for the 08 xB and the parts from TRD. Some of you saw the info and displays at backstage, but for those that didnt here is a few items that will be available for the car.

ATB Differential

Brake Kit

Lower Springs

TRD 19" Alloy Wheel

TRD Sport Muffler

TRD Strut Tie Bar Front

TRD Oil Filler Cap

TRD Rear Sway Abr

TRD Quickshifter

TRD Performance Air Filter

Dont have the pricing yet, but hope to get it to you soon. Along with some pics.

is it all interchangeable on the pt cruiser? he he

I wonder why they aren't doing the S/C for the 2AZ-FE

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

ATB Differential 1350.00 + install

Brake Kit tbd

Lower Springs 250.00 + install

TRD 19" Alloy Wheel 249.00 each

TRD Sport Muffler 469.00 + install

TRD Strut Tie Bar Front 200.00 + install

TRD Oil Filler Cap

TRD Rear Sway Abr 189.00 + install

TRD Quickshifter 150.00 + install

TRD Performance Air Filter 65.00 + install


Not to steal any thunder, just helping out :lalala: :P ..

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

From what we have been told the body kits are going to be ready at time of launch for the vehicle. Most but not all will be ready for release then.

No worries Chris no thunder to steal, just providing info to everyone.

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

From what we have been told the body kits are going to be ready at time of launch for the vehicle. Most but not all will be ready for release then.

No worries Chris no thunder to steal, just providing info to everyone.

Did you see the Optimize flyer for the body kit? Turns out its a lip kit :tap: ...

Yes, it is a direct bolt on lip kit. They are saying the installation will be fast, easy and painless. You know the kits will shop up unpainted too, right?

Yes, it is a direct bolt on lip kit. They are saying the installation will be fast, easy and painless. You know the kits will shop up unpainted too, right?

Definately, but it will totaly add for looks on the xb. I think the lip kit is going to be a must have item after seeing it without a lip kit from the start.

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

From what we have been told the body kits are going to be ready at time of launch for the vehicle. Most but not all will be ready for release then.

No worries Chris no thunder to steal, just providing info to everyone.

Thanks for the info Bryan. Im assuming the newly designed fenders, headlamp assemblies and bumpers will bolt on. It looks like the Japan 08 bB hood is the same as current us xb. very exciting stuff for current xb owners still wanting to hold on to their rides and mod it up to a true jdm style.

Bryan stop posting this stuff...you are taunting me! /wrists for having to wait until the end of May...

:P

Whats the ATB Differential? An LSD?

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

From what we have been told the body kits are going to be ready at time of launch for the vehicle. Most but not all will be ready for release then.

No worries Chris no thunder to steal, just providing info to everyone.

Thanks for the info Bryan. Im assuming the newly designed fenders, headlamp assemblies and bumpers will bolt on. It looks like the Japan 08 bB hood is the same as current us xb. very exciting stuff for current xb owners still wanting to hold on to their rides and mod it up to a true jdm style.

I don't think anything from the 2008 bB will bolt onto the 2008 xB. They are totally unrelated vehicles. The bb is as small or smaller than the 1st-gen. xB.

2008 xB
http://upload.wikimedia.org/wikipedia/en/5/5d/2008_Scion_xB.jpg

2008 bB (also Daihatsu Materia)
http://upload.wikimedia.org/wikipedia/commons/d/d1/Sciom_bB.jpg

When could we see these body parts on the us market as a front clip and rear bumper conversion. Im in on this, big time?

link to 08 bB
http://www.scionlife.com/forums/viewtopic.php?t=171532

From what we have been told the body kits are going to be ready at time of launch for the vehicle. Most but not all will be ready for release then.

No worries Chris no thunder to steal, just providing info to everyone.

Thanks for the info Bryan. Im assuming the newly designed fenders, headlamp assemblies and bumpers will bolt on. It looks like the Japan 08 bB hood is the same as current us xb. very exciting stuff for current xb owners still wanting to hold on to their rides and mod it up to a true jdm style.

I don't think anything from the 2008 bB will bolt onto the 2008 xB. They are totally unrelated vehicles. The bb is as small or smaller than the 1st-gen. xB.

2008 xB
http://upload.wikimedia.org/wikipedia/en/5/5d/2008_Scion_xB.jpg

2008 bB (also Daihatsu Materia)
http://upload.wikimedia.org/wikipedia/commons/d/d1/Sciom_bB.jpg

oh i thought this link was the real deal.
http://www.scionlife.com/forums/viewtopic.php?t=171532

nah, that's a Chinese CoolBear made by Great Wall Motors. It looks like the 1st-gen xB with the 2008 bB front end. That great wall motors is pretty interesting. If you look at their trucks they have copies of both Toyotas and Nissans, and it looks like at least 2 or 3 generations. I saw a Great Wall Deer when I was in Abu Dhabi so they do export them. Maybe you could find someone to import the CoolBear for you.

nah, that's a Chinese CoolBear made by Great Wall Motors. It looks like the 1st-gen xB with the 2008 bB front end. That great wall motors is pretty interesting. If you look at their trucks they have copies of both Toyotas and Nissans, and it looks like at least 2 or 3 generations. I saw a Great Wall Deer when I was in Abu Dhabi so they do export them. Maybe you could find someone to import the CoolBear for you.

thanks for the correction. Chinese knock off eh. I just want the front clip and mirrors. Thats friggin bad a$$.
You lucky dog.. Abu Dhabi must have been a great experience for ya.

nah, that's a Chinese CoolBear made by Great Wall Motors. It looks like the 1st-gen xB with the 2008 bB front end. That great wall motors is pretty interesting. If you look at their trucks they have copies of both Toyotas and Nissans, and it looks like at least 2 or 3 generations. I saw a Great Wall Deer when I was in Abu Dhabi so they do export them. Maybe you could find someone to import the CoolBear for you.

thanks for the correction. Chinese knock off eh. I just want the front clip and mirrors. Thats friggin bad a$$.
You lucky dog.. Abu Dhabi must have been a great experience for ya.

It was interesting, but not as cool as some of the other places I've been. I'll try to get some pics up in the next couple days.

welcome back brent

thanks Chad

Photo sent Brent.

you likey da chinese stuff huh!

you likey da chinese stuff huh!
JUST A RED NECK AMERICAN WHO COULDN'T TELL THE DIFFERENCE. AND "YES"

you likey da chinese stuff huh!
JUST A RED NECK AMERICAN WHO COULDN'T TELL THE DIFFERENCE. AND "YES"

:rofl: :rofl: :rofl: :rofl:

Ooh sounds nice! :clap: :clap: