| View previous topic :: View next topic |
| Author |
Message |
gear7
Joined: 21 May 2008
Posts: 65
|
| Posted: 8/2/08 9:07AM Post subject: stabilizer end link movable by hand? |
|
|
| reason i'm asking this is that i've been getting some suspension noise from going over small bumps. it sounds like something is loose. i noticed the thread about loose suspension bolts so i raised my car and check all bolts. everything looks tight, but i don't have a measured torque wrench so i really don't know. however, my question is.....is the stablizer bar end links movable by hand? both of mine is easily movable...like twisting it left and right with just my hand. i thought they were suppose to be tight. let me know what you guys know. thanks. |
|
| Back to top |
|
BZinn1
Joined: 23 Jun 2007
Posts: 4109
Location: Washington
|
| Posted: 8/2/08 9:09AM Post subject: |
|
|
| Is it the stock link......mine move a bit as well.depending onthe miles and wear they might be wearing out......cheap and eay to replace. |
|
| Back to top |
|
SquallLHeart
Joined: 23 Oct 2004
Posts: 12953
Location: NorCal LED-Head
|
| Posted: 8/2/08 12:01PM Post subject: |
|
|
yea.. there's gonna be a little play in it. much more if you're still on the stock sway.
as long as the bolts that hold them in are all tight, you're okay there |
|
| Back to top |
|
| |