| View previous topic :: View next topic |
| Author |
Message |
metaldrumz
Joined: 25 Jun 2008
Posts: 18
Location: Bethlehem Pa
|
| Posted: 8/17/08 3:21AM Post subject: Need Help with headliner |
|
|
| This maybe a stupid question but how is the headliner held up. I need to drop the front because I bought the Gangsta visor and want to add some screws to it. Thanks for any help |
|
| Back to top |
|
lvbitwiz
Joined: 09 Aug 2006
Posts: 895
Location: Scion Apocalypse Vegas
|
| Posted: 8/17/08 7:57AM Post subject: |
|
|
Several things hold it in place.
Remove the A,B and C pillars.
Gaskets from around the doors and hatch
Pull the visors
Pull the oh crap handles
There are a total of 5 press in fastners, these all need to com out (panel tool works fine)
Pull the map light
Pull the dome light
remove out of the rear of the car
screw away
and since you've taken the time to take it out...dynamat/fatmat/edead/noisekill the roof! |
|
| Back to top |
|
metaldrumz
Joined: 25 Jun 2008
Posts: 18
Location: Bethlehem Pa
|
| Posted: 8/17/08 8:52AM Post subject: |
|
|
I forgot to mention it is an 08 xb with the airbags in the pillars. Any special precautions to take with this
Thanks |
|
| Back to top |
|
lvbitwiz
Joined: 09 Aug 2006
Posts: 895
Location: Scion Apocalypse Vegas
|
| Posted: 8/17/08 2:39PM Post subject: |
|
|
disconnect the neg pattery cable, when removing the A pillar take care not to damage the airbag (the actual airbag is rolled up neatly behind it, look at the right and left sides on the photo, its the white tube looking thing,you'll see when you pull the a pillar, the actuator for it is by the b pillar) You see wiring that is wrapped in yellow, this is for the airbag. Putting a screw into it would be a bad thing.
work slowly and you'll be fine
|
|
| Back to top |
|
metaldrumz
Joined: 25 Jun 2008
Posts: 18
Location: Bethlehem Pa
|
| Posted: 8/18/08 3:13AM Post subject: |
|
|
| thank you |
|
| Back to top |
|
| |