PTUNING: Adjustable Front License Plate Holder w/ Tow Hook Mount (tC, tC2, xB2, xD)
 

*One of the best selling license plate relocation kit for the Scion
*First available for the 2011-2012 Scion tC
*Over 500 sold!

http://www.ptuning.com/graphics/ptuning/pext1001_5.jpg

http://www.ptuning.com/graphics/ptuning/pext1001_1.jpg

http://www.ptuning.com/graphics/ptun...-installed.jpg

http://www.ptuning.com/graphics/ptuning/pext1001_2.jpg

http://www.ptuning.com/graphics/ptuning/pext1001_3.jpg

http://www.ptuning.com/graphics/ptuning/pext1001_4.jpg

Can be installed in 5 minutes!

Most state laws require front license plate. This kit is less than the price of one "missing front license plate" ticket in most states.

Do you hate the stock mounting location of your front license plate?
Do you have an aftermarket front bumper that has no provision for the license plate?
Is the front license plate blocking your front mount intercooler?
Tired of getting tickets for not having a front license plate?

Well, we have a perfect solution. Our adjustable front license plate holder w/ tow hook mount will allow you to mount the plate using the factory front tow hook.

The adjustable license plate holder also allow you to place your license plate in numerous positions.

The kit comes complete with everything you need for installation. Easy to install and to remove. No cutting required. Installation takes about 5 minutes.

$69.95 + FREE SHIPPING (05-10 Scion tC)

$69.95 + FREE SHIPPING (2011 Scion tC2)

$69.95 + FREE SHIPPING (08-10 Scion xB)

$69.95 + FREE SHIPPING (08-10 Scion xD)

*Free Shipping is within the 48 states only

Awesome...will this work on the IQ? It also has a front tow hook

As soon as we are able to get our hands on a local Scion IQ, we will definitely make one for the IQ. If you know of anyone local to the Northern Virginia area and are interested, please have them contact us.

Thanks
Mike @ PTUNING

Scion tC2 - Edward F. (CA) shipped
Scion tC1 - Nam N. (MN) shipped

Thank you.

PTUNING is currently looking for a local Scion IQ to design our Adjustable Front License Plate Holder. If you are located in Northern Virginia (zipcode: 20110), please pm us for more details.

Thank you.

what do you guys use to cover the gap in the tow hook cover after installing this?

Did you ever make one for the iQ?

We are still waiting for someone local to stop by for us to take measurement for the tow hook kit. Once the kit is produced, this individual will get the first production kit for free. Anyone with an iQ interested?

Thanks,
Mike @ PTUNING

I posted it on the iq-forums...
http://www.iq-forums.com/forums/scio...-virginia.html

Wish these would work on the Gen1 xb. Nice product!

Just placed my order 8)

I have a new iQ and am VERY interested in this. I live in Columbia, MD but could make the hike there. (am also interested in a cold air intake system for my iQ, so you could do that at the same time)

How do I go about ordering one for my scion tc 2012??? Where do I make the payment? Thank you

Do you guys have this available for the iQ yet?

So sorry for the delay in responding.

Scion tC2:
http://www.ptuning.com/subdir/itemde...l&ModelDesc=tC

Best Regards,
Mike @ PTUNING

We still need a local iQ for test fitment.
Anyone local that can stop by for about 30 min, please PM us?
For using your iQ, we will offer you a free license plate relocation kit once it's available.

Thank you,
Mike @ PTUNING

Tempted to get one of these. But does it include a thing to cover the extra space of the tow mount hole cover? We definitely don't want water dripping or getting inside that hole.

Once the tow hook bolt is installed, the hole is sealed.
You may want to put a bit of anti-seized on the thread so it will be easy to remove at a later date.

Thanks,
Mike @ PTUNING

What I meant was the hole in the bumper.

Once the factory plastic cover is removed and the tow hook section is installed, there is little to no room left to put on any type of cover.

Thanks,
Mike @ PTUNING