rlo

I'm sure most of us been on dezod.com and noticed the oem donut gasket issues with the invidia s-pipe. For awhile I've googled a solution for this problem and found nothing that would help. Last week I ordered a dezod replacement gasket (just to see if it would work) along with the s-pipe. I finally installed everything over the long weekend and this is what I got.



and this is a side by side comparison dezod on the left and oem on the right.



as you can see there is a size difference. The dezod gasket fits nice and flush in the s-pipe. I did compare it with oem one and it was small.

After installing the dezod green header, s-pipe, urethane hangers and dezod exhaust we tested for exhaust leaks and found none.

Here are the links:
Dezod Motorsports. Exhaust Donut Gasket-2.5" inlet for Dezod headers (Use only on headers produced AFTER 4/1/14)

Invidia Downpipe - Performance Scion tC S Pipe 05-10

www.dezod.com/pd_dezod_motorsports_4-1.cfm

www.dezod.com/pd-dezod-motorsports-na.cfm

http://www.torquesolution.com/Scion-.../ts-eh-200.htm

Johnnyaf87

I have the same exact setup. No issues here as well.

paul_dezod

Awesome news! Thanks for sharing.

paul_dezod

RLO has a newer version header which is very different than yours Japanjay. So apples to oranges.

rlo

Damn my stock header and s pipe didn't look like that when I removed it. Lol but regardless fits right no leaks with the new system.