Coming for help. Engine Code P0447, Evap System. How to Fix?
#1
Coming for help. Engine Code P0447, Evap System. How to Fix?
This is all part of the Evap system. Anyone ever have a specific issue with this code or device?
One of my hoses was on wrong at the EVAP think by the intake. I will not go over 3/4 tank of gas until this is fixed. I was guilty a few times of filling my tank up all the way. Its bad cause all the heat causes pressure but it was a OCD thing.
I'm going to get the code cleared then see what makes it come back on.
I will double check all the electrical connectors at lunch time.
One of my hoses was on wrong at the EVAP think by the intake. I will not go over 3/4 tank of gas until this is fixed. I was guilty a few times of filling my tank up all the way. Its bad cause all the heat causes pressure but it was a OCD thing.
I'm going to get the code cleared then see what makes it come back on.
I will double check all the electrical connectors at lunch time.
#2
Ok. Well There are two little fittings under the evap thing, and they both look like they accept a hose. Well back from when I SeaFoamed the car I put the hose on the wrong one. So it was not sucking out the exhaust fumes. Last night I corrected this problem and when I started my car up just now at lunch no CEL was on.. This made me happy.
And i screwed the gas cap on so it clicked 10 times. But I'm pretty sure the hose being attached to the wrong thing was the issue.
And i screwed the gas cap on so it clicked 10 times. But I'm pretty sure the hose being attached to the wrong thing was the issue.
Thread
Thread Starter
Forum
Replies
Last Post
rcflyer15
Maintenance & Car Care
3
12-05-2014 05:15 PM