yoson13

I have been using this forum for a few months now. Although this is my first post I am not new to car modding. I wanted to share my most recent project with all of you. It is my first projector retrofit that I have done and I believe it turned out fantastic. I used all knock off parts. The projectors can be found on amazon for $43 and the hids I also got from amazon for about $30 plus paint. Grand total was under $100 bucks and took me about 8 hours for both headlights. Thanks for looking

Drum roll Please:

https://drive.google.com/file/d/0B2Z...ew?usp=sharing
https://drive.google.com/file/d/0B2Z...ew?usp=sharing
https://drive.google.com/file/d/0B2Z...ew?usp=sharing
https://drive.google.com/file/d/0B2Z...ew?usp=sharing
https://drive.google.com/file/d/0B2Z...ew?usp=sharing

jct

and that's cool

yoson13

Thank you, much appreciated.

PSYDUCK420

Looks really nice, wish I had the time and money!

yoson13

Honestly for the cost and time put into it it is very worth it. The visibility the projectors give you is just incredible.

PSYDUCK420

And throwing them in the oven removing the housing wasn't a hassle?

yoson13

Not at all set your oven for 275 put them in for 6 min and they come apart pretty easily. Its the second time I have had them apart.

Sciota

Do you have both high and low beams? also could you give the link for
the projectors? Thanks

yoson13

Yes there is high and low here is the link
http://www.amazon.com/gp/aw/d/B00B21R0TA/ref=mp_s_a_1_1?qid=1438014759&sr=8-1&pi=AC_SX200_QL40&keywords=h4+retrofit+projector&dpPl=1&dpID=41BOgW%2BcStL&ref=plSrch

StxArOne

I was just wondering how these looked installed when you were done! Nice one!

It's actually next to happen when I make my front bumper side markers clear, going to clear the orange out of my headlights and do the projectors. Using the stock headlamps. I got the DEPO's but they looked awful on my car so I returned them. Restoration on them turned out great though!

What are the wires for on the projectors? Got photos of how you wired those?

yoson13

The wires on the projector bowl is for the high beam cut off shield. I had already bi-xenon ballasts that had the high beam connectors on them but all you got to do is connect them to your stock h4 connector or get bi-xenon ballasts. I don't have any pics of the wiring, it's all tucked away behind the headlights. To much of a pita to fish them out. There are plenty of diagrams on Google that show you how to hook everything up or if you have any specific questions I can try and walk you through it.

StxArOne

Oh!! Okay safe. No worry about pictures, I didn't know if you took some during the process. Not really a big deal, it's clear enough what to do with them

I appreciate the offer on the questions. I might have. I always offer the same thing when I write guides. Mainly because I feel like I'm not being clear enough.

Thankiesssssss!

yoson13

I keep forgetting to take pictures when I install something. I just get to excited for new car parts. Lol. I will try and remember from here on out

StxArOne

YES! I miss a lot of great pictures like that. Plus when your focused on figuring out what your doing, your mind is where it needs to be

Edit: I'm a dumb***... I thought the other thread on this was you