randomsuper

currently i'm running 18x9.5 +35 in the rear but i'm throwing some 20x8.5 +38 wheels on it next week. i want to go out 5 to 8mm more. i just would rather not buy hubcentric spacers.

vancouverray

I got 19x8.5 +38 on the rear of my 012 XB . 10mm H&R spacers , extended studs too . Don't go with the bolt on ones .

ilocano671xb2

Heres mine

jnaval

Haven't posted in a while, here's my xB2 as a refresher.

Krysune

Here my baby... 18" x 7.5 +42

4150

iTrader: (1)

18x8 +30 MB Weapons/A-Tech Erasers in bronze all the way around

undftdxb

18x8 +30 MB Weapons painted satin white

10spokess

nava89

Here's how mine looks now ended up cutting the front flares because my front lip broke in three pieces. 18x9.75 and 265/35 all around

Biggregg24

Looks good. Where did u get the flares?

autobotguy

Got myself a set of Avid.1 av-06 wheels in 18x8 wrapped in Fallen Zeix rubber.

nava89

After hours automotive same guy that made them for the 2jz xb.

nava89

That set up looks clean. Good job

dean_saldana

Hey guys my first time posting here since i just got new wheels. So i bought some zaubers, 18x8 +40 and 18x9 +38. I got 225/40 tires for them and im dropped on df210 springs. I wanted to get 10mm spacers for all 4 sides but i was told i would have to get extended studs. Can anyone point out where to get them? Or do some spacers come with the studs already?

MR_LUV

Dean, I'm not a Wheel & Tire Expert but, you can start by Checking out these 2 sites: Wheel Lug Nuts, Studs, & Spacers | Jegs.com
https://www.z1motorsports.com/z1-pro...ds-p-4215.html

Hope it Helps

Good Luck!

Sinnerxb

Hey guys, I just bought my xB Tuesday and I already have trd springs on the way and I need help with wheel size selection, please. I've been through all these pages and I'm not closer in figuring it out, lol.

I already have tires 235/40/18 so I want to run those with the trd drop and I don't want to roll or pull fenders so what width and offset do you guys suggest?

I've decided to get forgestar M14 but I'm not sure if I should be safe and get 8" or 8.5"..... I'm leaning towards 8.5"

Thanks

GDubya

In the front, 18x8.0+38 will be exactly flush, 18x8.5+38 will poke ~1/4".
Depending on tire, 235/40-18 should mount with (very near if not) vertical sidewall on 8.5" wide wheels (eg. 225/40 yields just slight stretch) and afford a bit more curbing protection on 8.0" wide. I'm running 225/40 on 18.0x8.5+38 mTechnica Turbos. And yes, I need to get around to posting pics...
With TRD drop, all of the above will work without rubbing/fender work unless you hit huge bump and/or huge load.

Sinnerxb

Thank you for the reply. I want to run a square set up so I can rotate the tires. So I'll either get all 8" or all 8.5"

GDubya

Agreed on non-stagger for rotation. 12mm spacers (do require swapping studs) will flush/match up the rears.

Sinnerxb

I'm thinking 8.5 with +40 as of now with the 235/40