trdsparks

I know have available a complete Fog Light Kit for the Scion xD. This is a similar kit that you see on the 5 Axis Scion xD. This is a nice kit, let me know if you have any questions!

Jamie

Photos:







Direct link to this on our site: http://www.trdsparks.com/displaypart...&parts_id=2297

XD40tC

Are they going to release the one for the box?

trdsparks

I will find out for you and let you know.

ChelsDS

Oh crap I need to get these!

Who makes this kit and have they made kits before? Whats the quality like?

trdsparks

Haha not sure if you saw in the 1st post, its from 5Axis.

tmrepp

Any idea how it mounts up? Does it slide right into the clips? I'm weary of cutting them off, hopefully someone (cough VRD?) makes some fogs that slide right in. :D

pickledchang

id also like a little more info on the install, especially how the wiring goes in... does it just come with a standard toggle switch to mount on your dash? could you post the install directions on here?

id have to say this is at the top of my list now of things to get!

tmrepp

Also, does it utilize the fog light (light) in the dash cluster? Someone figured out how to turn it on, did they ground it or give it 12v(+). I'd like to make the install completely seamless. Wiring doesn't really matter, as I'm good with it. Practically installed the whole alarm with a little guidance, and customized it to the point where it's at now. Also ran my own power inverter wire from the battery, put a relay in to turn on my radio from my alarm remote, and also relayed the inverter so it shuts off without the ignition on, but have a switch, so if I want it on without the car on it will turn on. Otherwise, you forget and leave it on.

Sorry, rambling. Mind's going 100mph, but I'm exhausted.

Zefoxe

About time something came out

ChelsDS

I thought that meant it was featured with the kit, not made by 5Axis.

Also interested if there is a toggle switch for the inside of the car and if (when they're one) that they light up the icon on the dash.

pickledchang

ive got the same questions as tmrepp, im hoping the install comes out to be as 'factory' looking/functioning as possible... so the xD has a fog light indicator light on the dash? ive never even paid attention to that.

MaxiVisVires

Will these fogs fit the RS1 body kit?

ChelsDS

pickledchang: The only way i knew it was there was I was messing around with my flashlight in the car and looking to see what symbols were on the gauges lol Yes.. I do strange things when I get bored

tmrepp

If your body kit just bolts on, the bumper isn't any different, then of course it would. If it changes the shape of the vent holes or whatever they're meant to be, then who knows. hah


edit:
I noticed when I had the gauge cluster sitting out beside the car in my driveway and the sun was shining on it. I was like wow, wtf and no fog light wiring? Lame

ChelsDS

iST symbol only

tmrepp

Huh? You mean wiring on the ist only, I know, it's not right. Every other car that toyota has put out, that has spots for fog lights at the very LEAST has the wiring for it. Oh well. I just hope I can figure out how to get that fog light indicator light to come on. I'll eventually do a clean install.

ChelsDS

Well its both. We don't have the pre-wiring so therefore the symbol will never light up unless we either wired in our fogs and had it come on when they did. Or you could be silly and just have the symbol turn on without fogs.

tmrepp

I'll eventually wire it in, so it'll seem completely factory. Symbol and all.

rhino74s

hmmmm..... very interesting. Miight have to check into these.

pickledchang

thats what i want, factory as possible. should be pretty easy to do despite lack of factory wiring. just need to find a nice switch that goes in one of the cutouts on the dash/console. so there is not even a bulb or led in there to light up the fog symbol?