qbnlykwhoa

iTrader: (1)

On the front grill there is a chrome piece that goes around the grill, is there anyway to remove it? If so how, and is it hard? What holds it in place? Any help would be great.

The_Instigator

The front grill has to be removed first. It is held in by clips and comes out without tools. After the grille is out, there are 6 screws and 3 clips that hold the trim ring in place. If you put the grille back on without the trim ring, it will look like this:

Jdawg82

The whole grill is clipped into the front bumper. The chrome trim is held in by about 6 phillips screws. I would just reccomend popping out the grill and taking the chrome trim off.

imthewalrus37

wait...whats going on?

NY_BSP_Scion

VERY NICE clean front end man. Have to give ya credit for it. OEM ground effects?
Wish i could get a pair of those 1.0 grilles, but i heard they are expensive and only from toyota right now.

qbnlykwhoa

iTrader: (1)

That looks nice man. In person can you notice that somethings missing? Like does it look that way? What about painting the trim black? Iam gonna see if i do it today. I dont really like chrome or shiney stuff.
When the grill is removed it comes out from the inside or do you pull out? Thanks again

ProPain

Anybody got a picture of the bracing behind the grill? Fabricating a "floating" Scion emblem might be kind of cool if there's sufficient support behind there for it.

ProPain

On second thought, scratch that. I can't think of any grill materials that would look good, yet still be subtle enough to NOT draw attention from the emblem.

dgHotLava

moved...

The_Instigator

With the trim ring out, there is a small gap but it isnt noticeable unless you really look at it.
Ive actually gone on and painted the trim ring black so now it looks like this:

nycazn79

How to remove the grille:

http://www.grillcraft.com/installs/i...ew&install=170

The_Instigator

DONT FOLLOW THOSE INSTRUCTIONS..they make it 1000% harder to remove the upper grille than is necessarry. It can be removed with only the hood open and no tools.

motozen

^^^ exactly. Look how they made their grillcraft grill for the tC.

Stupid install for their tC grill that should be as easy as a replacement.

They like to do things the hard way it seems.

qbnlykwhoa

iTrader: (1)

With that grill craft, do you leave in the old grill? Like does it go over it? And does anyone have a picture of it in black?

imthewalrus37

I love the grill on the tC

MJVsTC

What kind of turn signal bulbs are those?

Jdawg82

Here is my tc with the black grillcraft grill. You can still faintly see the scion logo.

imthewalrus37

decent

The_Instigator

Raybrig R132 Hyper white. They match the luminics Hyper-Whites perfectly...see:

DTRUONG_112

its okay.