coin/cell phone holder help
10-14-2010, 01:57 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Posts: 4
coin/cell phone holder help
hey guys,
I have a 2006 tC, and the coin/cell phone holder in front of the cup holders is stuck, probably because a coin is stuck in there. I did search, and found a few other topics from awhile back about this, but i wasnt totally clear on how to take apart the dash to fix this. I didnt want to just start pulling stuff off at random and hope it would work. Specific instructions on what i can do would be greatly appreciated. Thanks
I have a 2006 tC, and the coin/cell phone holder in front of the cup holders is stuck, probably because a coin is stuck in there. I did search, and found a few other topics from awhile back about this, but i wasnt totally clear on how to take apart the dash to fix this. I didnt want to just start pulling stuff off at random and hope it would work. Specific instructions on what i can do would be greatly appreciated. Thanks
.
10-14-2010, 01:25 PM
#6
Toyota plastic...yes there is a danger of breaking something.
But our whole console area comes apart with like 2 screws. I think you can figure that out, just start pulling crap off, you'll find it easy.
But our whole console area comes apart with like 2 screws. I think you can figure that out, just start pulling crap off, you'll find it easy.
10-14-2010, 02:26 PM
#8
Senior Member
SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
just two pieces to pull.. lower waterfall/shifter part..
and the cupholder part with the small storage compartment with the stuck lid.
just pull the lower waterfall piece up and backwards. that's really the most "difficult" part... it takes me literally less than 10 seconds to yank both of those pieces out.. with maybe an extra second if i wanted to get the upper waterfall piece out.
there's the cigarette lighter cable you can disconnect or not, but you can just move the panel piece out of the way for you to get to the cupholder. pull up on the parking brake so you can slide it up and out easier.
there's really nothing special or tricky. just yank the damn thing apart.
10-14-2010, 02:47 PM
#9
Member
SL Member
Join Date: Jul 2010
Location: Whitehouse, TX
Posts: 89
there's NO screws when pulling the cupholder panel piece out.
just two pieces to pull.. lower waterfall/shifter part..
and the cupholder part with the small storage compartment with the stuck lid.
just pull the lower waterfall piece up and backwards. that's really the most "difficult" part... it takes me literally less than 10 seconds to yank both of those pieces out.. with maybe an extra second if i wanted to get the upper waterfall piece out.
there's the cigarette lighter cable you can disconnect or not, but you can just move the panel piece out of the way for you to get to the cupholder. pull up on the parking brake so you can slide it up and out easier.
there's really nothing special or tricky. just yank the damn thing
apart.
just two pieces to pull.. lower waterfall/shifter part..
and the cupholder part with the small storage compartment with the stuck lid.
just pull the lower waterfall piece up and backwards. that's really the most "difficult" part... it takes me literally less than 10 seconds to yank both of those pieces out.. with maybe an extra second if i wanted to get the upper waterfall piece out.
there's the cigarette lighter cable you can disconnect or not, but you can just move the panel piece out of the way for you to get to the cupholder. pull up on the parking brake so you can slide it up and out easier.
there's really nothing special or tricky. just yank the damn thing
apart.
Usually people have a heart attack in anything that involves yanking anything off with a bunch of force on their first time doing it.
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM
SloTC1
PPC: Engine / Drivetrain
14
08-16-2018 02:45 PM
