SSR_Engineering

We're looking for the TC Tach Signal Wire, does anyone have a diagram, or wire color for the ECU tach signal wire?

matty-tC

do you have a copy of the FSM?

aarontrini85

it is a black wire going to the gauges its on the far left when you take of the harness from the gauge pod atleast i think it is. its been a while since i hooked up the rsm

SSR_Engineering

It's supposed to be on the Inside plug of the two plugs on the top or the right if the ecu is laying flat. And it's supposed to be the top right pin, which it's not
[{ }{ }{ }==={ *}{ }] <--- if thats your ecu those are the 5 plugs im talking about and the asterisk is the pin it's supposed to be

Where can i download the FSM?

matty-tC

it was on the forums somewhere. try a search. if you can't come up with it, send me a message and i'll see if i can zip and e-mail it

jeremyc

If you dont want to go to the gauge cluser you may want to try the data link conn. under dash, pin 9. Its black

matty-tC

i can't get the FSM to upload or e-mail. my home connection sucks.
sorry man

Joe_Dezod

Here I come to the rescue! Hopefully this solves your problem. I'm not 100% sure on the color of the wire, but I know that's the spot for it. Good luck.

Joe_Dezod

Has SSR seen this yet?