So, as some have read in my previious thread i was asking for instructions on how to install the PE300 kit. Not getting any reply i figured i'd go to fathers shop and spend a day toying with it. Got it all installed except for the FPR which looks like its cut on the sides.

No boost gauge was installed afterwards and i took the car for a test drive. It felt like it had maybe 110hp max...... I figured maybe it's due to having a auto transmission?

Today i went and got a boost gauge and guess what?... I get no boost, Maybe 1 psi per the gauge! I rechecked everything, all the vacume line and made sure the Recurculation valve was not stuck. ALL GOOD. When i rev the engine i and the RPM drop i can hear the boost being re directed into intake pipe.


ANY IDEAS!!!!! I even took off the pipe and connected the air filter to the car the oem way and disconnected the pipes from the super charger to see if it produces boost and SURE IT DOES.

I took a video and will try and post it on you tube and put the link here for you guys to see.


Thanks for all the help!!!!

 

 

That kit should produce 6-8 psi and 145-155 whp, maybe the compressor needs rebuilt.

 

pics don't work