any one need an installer/tuner (houston area)
03-07-2010, 01:59 AM
#263
soo i took the plugs out there was black on the bottom of the plug and the metal part over the tip was hazy looking...dono if that means there no good but what the hell i already bought the other set so i just changed them.
03-07-2010, 12:19 PM
#265
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Houston, TX
Posts: 11,271
update
1. Marcial-injector and fuel pump install/ tune- 3/9
2. Ramiro-altima head removal/inspection/machineshop-3/11
3. Ramiro-custom downpipe/tune-3/15-3/19
Ramiro iv already ordered the pipes and should get here in time, give me a call for more info.
Marcial ill go ahead and drive to you to pick up the car monday. I figure it would make it easier on ya. If you dont want to do it this way give me a call. btw i cleaned the car out a little...lol
1. Marcial-injector and fuel pump install/ tune- 3/9
2. Ramiro-altima head removal/inspection/machineshop-3/11
3. Ramiro-custom downpipe/tune-3/15-3/19
Ramiro iv already ordered the pipes and should get here in time, give me a call for more info.
Marcial ill go ahead and drive to you to pick up the car monday. I figure it would make it easier on ya. If you dont want to do it this way give me a call. btw i cleaned the car out a little...lol
time to change it up AGAIN haha
03-07-2010, 06:49 PM
#270
Senior Member
SL Member
Join Date: Dec 2008
Location: Houston, TX
Posts: 1,788
that ***** sold em'. So friday the return is supposed to be at ypur house. Figured while we have all the interior pulled out I'm gonna use that 14ft roll of dynamat I have sitting in my trunk. I'll try to pull alot of the stuff out ahead of time because I'm gonna try to wrap the doors in carbon fiber.
03-07-2010, 07:16 PM
#273
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Houston, TX
Posts: 11,271
dude i almost broke down and got a tig welder today...just couldnt bring myself to do it...400 but still cant weld aluminum...lulz..one of these days ima just have to fork over a grand or two for an ac/dc tig.
03-07-2010, 10:32 PM
#275
Senior Member
SL Member
Join Date: Dec 2008
Location: Houston, TX
Posts: 1,788
I just found out my douchbag uncle sold a $45,000 TIG welder/generator for 100 bucks and an Arc welder... ____ing _______ is trying to sell off everything they have at the vineyard so my aunt gets nothing from the divorce. Luckily we got the diesel truck before he gave it away like he did her massive Kubota tractor. I hope my aunt's lawyers can pin him with theft or something for trying to liquidate all of her assets while she is in the hospital. She is the owner of everything not him........ Maybe I can get some of his metal shop stuff before he claims them as "Stolen". He has another TIG that needs to be repaired that I really really wanna get my hands on, also he has a powder coating oven.
03-08-2010, 02:20 PM
#277
i'm actually trading my rpf1's for something else.. you'll see!
also, chris i'll be at the new restaurant not the old one. address is 6823 Fry rd. fastest way to get there is I-10 exit Grand Parkway, and Grand Parkway will take you all the way to Fry road, exit Fry, and turn a right at the first light. then continue on to the 2nd light, make a left, and bam! you cant miss us. El Rancho Mex, Grill and bar.
so if you can check those oil lines, and do an oil change while your at it, i'd appreciate it. i'm gonna have to run by the bank to get some cash lol
also, chris i'll be at the new restaurant not the old one. address is 6823 Fry rd. fastest way to get there is I-10 exit Grand Parkway, and Grand Parkway will take you all the way to Fry road, exit Fry, and turn a right at the first light. then continue on to the 2nd light, make a left, and bam! you cant miss us. El Rancho Mex, Grill and bar.
so if you can check those oil lines, and do an oil change while your at it, i'd appreciate it. i'm gonna have to run by the bank to get some cash lol
03-08-2010, 03:21 PM
#278
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: Houston, TX
Posts: 11,271
k...ill see what i can do about the oil lines, try and find the fittings localy, if not ill have to order em and wait till they come in.
so far you need
injectors installed
fuel pump installed
oil lines changed (if possible)
oil change
tune
correct?
so far you need
injectors installed
fuel pump installed
oil lines changed (if possible)
oil change
tune
correct?