CEL light on after putting on a CAI
03-20-2014, 05:48 PM
#2
Senior Member
SL Member
Join Date: Feb 2014
Location: Pennsylvania
Posts: 128
I'm not an expert on this, but on the 6 forum, most of the people who complained about a CEL due to a CAI found that it was because there was more airflow than the MAF was used to reading.
It would probably help if you posted the code that you're getting.
It would probably help if you posted the code that you're getting.
03-20-2014, 09:26 PM
#7
Senior Member
SL Member
Join Date: Jul 2004
Posts: 13,963
03-20-2014, 09:42 PM
#8
Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 9
03-23-2014, 03:22 AM
#10
Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 9
CEL came back on after I hit a small bump. Its obvious that movement of the intake is causing the issue with the mass air censor. Everything is tight and in the correct place. Any Suggestions? I'm about to just put the stock intake back on.
Thread
Thread Starter
Forum
Replies
Last Post
SkillFreeJake
Scion tC 2G Aero & Exterior
17
07-27-2015 12:34 AM
hampton1100
Scion tC 2G Drivetrain & Power
6
05-28-2015 07:32 AM
cid_mcdp
Maintenance & Car Care
4
01-05-2015 02:45 PM
randode
Scion xA/xB 1st-Gen ICE & Interior
44
06-29-2004 04:19 PM
