J_A_Trevino

Thanks for the compliments, i am really happy with these wheels i really wanted the Tenzo R Drivex 7's in Ultra black but didn't want to wait for another month.

I'll take some more close ones of the lip and all and post them in a few days or so.

_____

gregp909

UPDATE: Just installed the TRD springs (1" drop) and still no rubbing issues. Pics posted in my profile.

blue_ink_tc

thanks for the pics, could u put a ruler on the lip and take a pic for me, or better yet how wide is the lip? yup, those are def the rims i want, if not the axis mod 7in glossy black, but im liking these alot better....keep the pics coming please

J_A_Trevino

check out the tenzo r drivex 7's those are some hot rims i actually was going to get those but did not want to wait more than a month for their release. ill try to post another pic of the lip with a ruler later this week or early next week. thanks

scion619

Ok so i saw some really cool rims on ebay and im wondering if they will fit on my xb.....
they are ro_ja formula 7's in gunmetal.... the size on it is 18x7/ offset 42mm... im looking to put 215/35's on them........ my car isn't lowered yet and im wondering if they will have any rubbing issues... PLEASE HELP!!!!!

thanks
scion619

04 xb polar white

mredz

NA

J_A_Trevino

i dont know if they will fit but i like your avtar.

violent_b

just put on my rims today. 18x7.5 with 215/35/18's and a +45 in the front and a 20mm spacer in the rear to give me a +25. no rubbing in the rear. in the front I do not notice any rubbing but I haven't lowered my xB yet. I have 10mm spacers to put in the front if I run into a rubbing issue.

I lost so much sleep worring about rubbing issues. i am so happy that they are finally on. :D :D :D

ezra70

I recently picked up some Sport Max 18x7.5 Hyper Silver wheels @ a good price, the offset is +42, according to the list I read, it was posted that the front wheels would rub @ full lock, my xA is not lowered, and I don't really plan to lower it, I would like to run 215/35 18 tires on these rims, would anybody have any suggestions, could I run spacers on the front to take care of the rubbing issue?? Most of the postings seem to be for xB's. Any help would be appreciated....Thanks

hnefrdo

Are the First-Gen Prius Wheels interchangeable with xA Wheels?

__________________

scionedwin

I'm thinking to buy some 19x8 n 19x8.5 for my xA

Do u guys know if i can do this???

_____

X2005B

heres my ride. ICW392 18X7.5 +45 mm offset, 215/35/18.Absilutely no rubbing Used onetongarages rear sapcer shim, and his blue 5mm spacerup front. Also have tein s tech springs.

Toy_xbox

Work Seeker cX

Front 18x8 25mm wrapped with Nitto Neo Gen 205/40/ZR18

Rear 18x8.5 20mm wrapped with Nitto Neo Gen 215/40/ZR18

Lowered on HKS coilovers and have rear wheel well lips rolled

After initial road test found that higher speeds and long turns tire would rub both front and rear. I had to roll the rear lips some more and heat and stretch the the fender wheel well openings out abot a 1/4" - 1/2".

1_Sick_XB

I Just bought some Racing Hart 18x7.5 rims with a et42 and some goldline springs with van's rear shims..

What are my tire options for good fitment a 215/35/18 i know will fit but i'd like somthing bigger.
.
and will my goldlines be too low?

as well as should i get some 5mm spacers for the front from van(onetongarage)?

thanks for any and all info.

scion619

Hey just purchased my rims today with the same rim specs as yours....18x7.5 (42 offset) with 215/35 tires. Just wondering if they rub? (without spacers) If so will I need spacers (front and back) to correct this problem? Currently my xb isn't lowered but I plan on lowering it in the future.

1_Sick_XB

215/35/19 vs 225/40/18

Tire height: 24.93 vs 25.09
Tire width diff: - vs .39 wider (.195 each side of tire)


explain to me why a 225/40/18 inch tire wont fit but a 215/35/19 will.

joe_rogan

I am running a 19x8 wheel with 45 offset. Used OTG shims.

Rubs when wheel is turned the way. Lowered with Tech S. 225-35-19 Tire

-Joe

____

krazylowgsx

i have a 2inch dropp on my box, and i'm running 20x7 wheels, with nitto555 225/35/20 tires! would go with any other size!!!!!

unseen

what is offset? im looking to sell my stock tc wheels, and wanted to know if they will fit an xb. the offset is +35, so with the xb's offset of +38, does that mean the tc stock wheels are too small or slim (or viseversa) to fit in the xb well? your help would be appreciated.

oldman

3mm is no problem.

There are no fixed offsets OEM it is 35mm on a 7 inch rim but to center a 8 inch rim it would be a 47 mm offset.

I have OZ Supperleggera rims 17x8 with 45 mm offset, 225x45 tire, stock suspension no problems rim and tire are 2 lbs lighter then stock rim. OZ is about the stongest and lightest rim you can buy for sane amounts of cash.

On the stock rims I have Yoko AVS ES100 225-45 very good setup
Auto-X I have Kumho 700 race tires, very good setup