Flasher Relay on Sale - A must for LED Mod
#1
Flasher Relay on Sale - A must for LED Mod
Item: LED Flasher Module Relay
Model: CF18-08 (part# 81980-50030 066500-4650)
Function: Fix Hyper Blinker Problem while Replacing LED Signals
Application: 05+ Scion tC & 07+Toyota Camry/Solara & 08+ Toyota Tundra/Tacoma
Following are some reference on how to replace your Flasher module and how to find the right LED bulbs from our forum members.
Link to Classified Here
Model: CF18-08 (part# 81980-50030 066500-4650)
Function: Fix Hyper Blinker Problem while Replacing LED Signals
Application: 05+ Scion tC & 07+Toyota Camry/Solara & 08+ Toyota Tundra/Tacoma
Following are some reference on how to replace your Flasher module and how to find the right LED bulbs from our forum members.
Link to Classified Here
Last edited by TWP; 03-03-2010 at 08:28 PM.
#4
Yes 1 flaher relay is good for all 4 corners whether you have full LED or not.
Please refer to above links for more detail.
Panson
TWP
#5
#7
next to the fuses... behind the access panel... on the lower left portion of your dash... if your ignition is in the "on" position, turn your signal (right or left) on and you'll hear the flasher clicking...
#8
***Warning***
Flasher Relays do disable your lights from flashing when you lock and unlock the car.
Flasher Relays do disable your lights from flashing when you lock and unlock the car.
#10
The Bad: light won't flash when you lock or unlock your car...thanks Aurora
The Good: plug-n-play, no soldering or splicing any wires. 1 relay is good for all 4 LED corners. If you decided to go back, just take out the new relay and put in the stock one.
Panson
TWP
The Good: plug-n-play, no soldering or splicing any wires. 1 relay is good for all 4 LED corners. If you decided to go back, just take out the new relay and put in the stock one.
Panson
TWP
#12
#13
Bump...
Why bother soldering load resistors while go LED on corners.
Simply swap in our flasher Relay and you get a no hyper blinking after LED Mod.
If you are going back to stealership for warranty issues, just put the stock relay in and have no problems
Why bother soldering load resistors while go LED on corners.
Simply swap in our flasher Relay and you get a no hyper blinking after LED Mod.
If you are going back to stealership for warranty issues, just put the stock relay in and have no problems
#17
Here is the discussion from other forum
http://legacygt.com/forums/showthrea...16#post2961016
Last edited by twpanson; 06-02-2010 at 03:00 PM.
#19
CF-19 relay will disable hyper blinker and still maintain your stock setting.
Warning flash light won't be disabled on this latest CF-19 relay.
Sincerely,
TWP
Warning flash light won't be disabled on this latest CF-19 relay.
Sincerely,
TWP
#20
CF-19 relay will fix hyper blinker for LED mod and still maintain your stock setting.
Warning flash light won't be disabled on this latest CF-19 relay.
Sincerely,
TWP
Warning flash light won't be disabled on this latest CF-19 relay.
Sincerely,
TWP
Last edited by twpanson; 06-10-2010 at 11:34 AM.