Washer bottle removal
#4
What are you trying to figure out exactly?? Removing it is pretty straight forward - remove the wire plug and hose from the pump, remove 2 or 3 10mm bolts and than push in on the clips around the neck and push it down and out. I guess you would probably need to take the bumper off, but unless you still have the fender liners and under carriage plastic I think you can get around it.
#5
I can laugh if you like.....I accidentally added used motor oil to the windshield washer bottle and now I need to clean it up. (mind you I was very tired and it was very dark outside-no excuse just setting that stage for your remarks.)
I was unsure if I had to remove the front bumper, or just remove the inner wheel well. I think the wheel well will be easier to remove. Thanks
I was unsure if I had to remove the front bumper, or just remove the inner wheel well. I think the wheel well will be easier to remove. Thanks
#6
Not the smartest thing to do but mistakes do happen. I used a dirty funnel with a lil oil residue in it installing washer fluid .. I should of rinse it but I wasn't thinking. I didn't remove the bottle but it took me a while to flush it out lmao
Thread
Thread Starter
Forum
Replies
Last Post
drgonzo92
Scion xB 2nd-Gen Suspension & Handling
14
04-24-2019 07:27 PM