How hard is it to install front bumper?
#1
How hard is it to install front bumper?
I have a front Fab bumper that I want to take out and install the stock bumper, how hard is to do this? Will I need any special tools to do this?
I was thinking of taking it to the shop, but if it's doable, I'd do it myself.
Thanks!
I was thinking of taking it to the shop, but if it's doable, I'd do it myself.
Thanks!
#3
I'll do it when L.A. starts warming up.
Once done I'll have this Fab style front bumper for sale, if anybody wants it.
There are a few cracks at the bottom and bottom corners.
Old Pic:
#5
#6
Its super easy to do, a hand full of clips, a bunch of 10mm bolts, and a couple of places where the bumper snaps in. It'll take you maybe 15mins to do. Just be careful not to brake any to the plastic snap in points.
Tools need: 10mm socket w/ratchet, blade screw driver
Tools need: 10mm socket w/ratchet, blade screw driver
Thread
Thread Starter
Forum
Replies
Last Post
hampton1100
Scion tC 2G Drivetrain & Power
6
05-28-2015 07:32 AM
umnitza
Exclusive Sponsored Sales
3
12-01-2014 06:26 PM