oreoremix42

Well it has been awhile since I have started this project due to relying on other people. I finally am in the final stages of the audio build. I have had the system installed for around 2-3 years now without really having a trunk. The reason for this piece is to clean up the trunk some so it doesn't look bad and then I can throw a carpet over it and use it normally. It has come out pretty good. this is the second to last stage. I ordered a pint of paint of my body color which NBM. the rear trunk piece will be painted and cleared and I will also be repainting some of the dash pieces.

Here are pics of the steps.

This is what it looked like for a while until I found speaker grilles



The next step was getting these speaker grilles



Then cut out the 1" mdf to put around the subs.



Then to prime it.



Next step will be using my brother-in-law paint gun and spray it up.

KaneoheKoa

Do you realize what that first picture looks like?!?

oreoremix42

So on my dash pieces I plan on having a friend come and sharpie my car with similiar setup like this.

I don't plan on doing my shift **** but wanted to show it to you guys. All done by a sharpie!! I have done a RS for my own interior like some others who did there dash pieces and he will do those for me and then will do the trunk piece above after its all painted. Then clear coat it all

oreoremix42

No one has opinions? I have my own style for trunk piece and dash pieces.

Greg S

iTrader: (1)

I like it!

jrincon17

THATS CRAZY !

oreoremix42

In a few weeks all my stuff with be painted and then he will be working on teh sharpie work and doing everything dark grey!