ChampionJeep

I can't compare my spring and shocks to TRD's. I am running the 210's with echo struts and the stock rear struts. Compared to a stock xB I thought it was so much better. The only problem is I wish I could bring the rear down to match the front height. Its a great drop.

bdmridgeback

210's in mine, 18xalot , 1/4" spacers in the rear, and she sits perfect in my book!!!!

dceclipse

My XA on df210

itscurtsk

Does anyone know if xB springs are taller than the xA? The xB has greater drop than the xA, but if xB spring are taller then this is irrelevant. However, if it is the same height, I would get the xB DF210s over the xA.

Geoman

What is everyone using for shocks with there DF210s..i have gabriel ultra shocks and struts right now..would i need diffrent ones when i put my df210 springs on?

itscurtsk

many people go with monroes, but gabriel is just another replacement brand. if it is still in good condition, i would just keep it and see how it is.

Geoman

What offset and tires for 16x7's do i need to get to get more flush with outside not sticking out but like 1/2 inch from side of fender with my DF210s on or my other option wheel i liked only came in 17" x 7.5 42mm offset? spacer..shims?

itscurtsk

i'm running 16x7 with +40 offset. the fronts have a 5mm wheel spacer just to clear the calipers and sits near flush right inside the fender. i used to have an 25mm (1 inch) hub spacers in the rear but would rub a little bit of the tire side wall with back passengers when going over dips etc due to the bounce, which is why i took it off. 20-25mm spacers should be fine since DF210s only give a 1.8 inch drop for the rears.

Geoman

16x7 or 17x7? your garage shows 17x7 ..what size tires are you using? did you have to roll fenders?

itscurtsk

i was only rubbing on the rears when i was on 17s with 215/45/17 tires with 25mm spacer. however, i am on racelands, was never on df210s. you will not have any fender issues at all.

Geoman

ty..that help alot..this plus wheel and tire thing was driving me nutts
thank you

torranosaurus

Anyone go with those cheap ebay springs for 50 bucks?
I have a well worn 2006 xb and for some reason, it looks like a 4x4. This is my 9th xb, and I just bought it so have no history on it. I want to get it down some, but it really isn't worth spending like 250 for springs. The car is probably worth 2500 and is my winter beater.

holdstumt

This is the wroooooonnng thread for that. HOWEVER, I wouldn't recommend going the eBay parts route. Always a bad idea.

Scarecrow23

**NOTE: Can a Mod move this to the correct Forum, can't post in classified - Tnx

**************************************************
Hello,

Since my xB was totaled I have a few items I would like to get rid of:

Tanabe DF210's 'New In Box" (never got to install them) for $200 shipped or $175 local pickup.



Custom fit Car cover for Gen 1 xB (used only a few times) for $85 shipped or $75 local pickup.



**Shipped to lower 48 or local pickup S Bay Area (Silicon Valley, CA)

PayPal accepted, PM if interested

yymandyy

does anyone have pics of a gen2 on dr210's with 19" rims? Are there any issues with the 19" rim? I have been advised twice now to go to an 18" but want to keep my 19s. Any advise/pics would be appreciated.

I have an RS8 currently on TRD springs and want to go lower