ScionLife.com

aeonfluckz · 06-04-2007, 04:31 PM

Do any of you know where I can pick up one of those locking washers that hold the shifter in place? I contacted the dealer and have looked online but no one sells them separately. Thanks.

steezie · 06-07-2007, 03:48 PM

i have no idea, a new washer came with my short shifter i know that the old one wuz such a pain to take off!!!!

azepolyn · 06-07-2007, 03:52 PM

been needing one for a while also ... I'm up for suggestions

aeonfluckz · 06-11-2007, 03:31 PM

They are called push nuts, I was thinking they were lock washers. Anyway you should be able to find them at any parts store. I got a box of assorted ones from Oreilly auto parts. I had to install it using a C-clamp and a 12mm socket because they are a @%#$! to get on any other way.

azepolyn · 06-11-2007, 07:22 PM

happen to recall what size you ended up using? I can't find anyone that carries assorted boxes.

aeonfluckz · 06-12-2007, 06:33 PM

Sorry, I don't remember seeing the sizes listed on the box. You can check the sizes here http://mdmetric.com/prod/ochiai/html_spn.htm but that might not be much help unless you know the radius of the pin.

I would just buy a few different sized ones if the parts store has them. They are pretty inexpensive.