What spacers or camber kit will be needed to make the oem 17x7 45 wheels become flush 12 offset?

 

...45-12=33
But, they don't make a 33mm spacer. Why do you need to push them out that far on stock rims?

 

camber kit has nothing to do with making wheels flush..a camber kit just is for adjusting camber.

and stock wheels out there far would look retarded IMO..at the most maybe do a 15mm spacer..even then I would rather just get new wheels entirely..

 

Im not a fan of tucked although I dont think it would look bad on my car, I'd rather go with a flush looked , so Im guessing Imma need hella wide rims for that

 

My personal experience i would suggest H&R 15mm spacers. Pics:

 

Actually, i would advise H&R 25mm spacers

 

i did this already sadly i didn't take any pics but i used ichaba 20mm up front and 25mm in the rear pretty close to being flush which by the way im selling both spacers

 

doubt its that close to really being flush

 

here's wednysorbust's tC with 25mm front and 15mm rears.



front:


rear:

 

bump keep the pictures comming

 

wow, that's damn near perfect

 

20 f/r