Okay does anyone know of a good way to quiet down my lisense plate and rear wiper when I have the bass hitting hard. It seriously sounds like my back hatch is going to fall off or something. My subs are a little too powerful or something. Thanks

 

take some generic weatherstripping and put it behind the liscense plate....

 

The wiper you'll have to take off. As for the plate, just apply some Dynamat to the back of it.

 

my rattles like crazy.. best solution was to remove liscense plate and wiper.. then i had to put it back on..
also

dynomat.

 

I had the same problem. To fix it I went and bought those little velvet circle things that you can stick to the bottom of your furniture so they don't scratch your floor or move around. I put about 5 or 6 of those on the back of the license plate and the license plate frame and it seems to have helped.

 

^^^ i have alot of those lying around..goona go look for some now..thanks..if not imma buy some more..the padded kind..

 

THAT'S WHAT I SAID!!!!!!!!!!!!!!!! same concept anyway....

 

ok here is the true rateler stoper for the plat only take it of buy one of those plasick backing and put in bhind the plats... put som fome on the back of the plastick peace then marck were the bottom holes go drill them put every thing to gether agen with 4 screst not just 2.... and there u go will never rattel "EVER!!!" 4 is better then 2.....

 

I used industrial grade velcro, attached with sticky tape. Works fine. . . zero rattle, even when slamming the hatch

 

I just use the thin 2 sided 3m automotive adhesive.

 

just take the hatch off

 

Thanks everyone, I didn't think I would get that much feedback in one day. The velco idea was really nice, good idea djct-watt. I'll have to wait until the weather gets better here to work on it though. I hate Indiana weather.

 

Can someone translate for me?

 

Man that one TOOK ME SOOOO LONG TO READ !!!

 

ok so i took my hatch off but now my heater and a/c dont work properly......

 

Dude, what?

Anyway, your subs aren't "too powerful". Any of the above listed ways are a good fix. Especially the velcro one. I once had a Cavalier that the tag rattled really bad on and I took a coozy and cut it in half and put it behind the license plate and it worked great. It was ghetto but hey...

 

My plate rattles because of the frame i have installed. I have the clear plastic cover with a plastic frame but since the rear plate is only held by two bolts, the bottom of the frame vibrates. It's annoying.

 

I didn't realize there was a school for eubonics in Salt Lake!