You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So the modding itch got the best of me on my day off and I had to do something to my car. This is the first mod I did on my '08 xB and its the first I did on my new '11 tC. Looks much better and cleaner in my opinion.
Before-
After-
__________________
2011 Scion tC, Cement, 6 spd manual, everything else is stock! for now.....
2008 Scion xB,Classic Silver Metallic,18x8 Motegi SP10,TRD Cold Air Intake,HKS Wagon Exhaust,Tinted Front Windows,Blacked Out Badges and Mirror Covers,Peeled A-Pillar Tape, Pioneer Headunit, Infinity 6.5" Speakers W/Component, Rockford Fosgate P1 sub, Rockford Fosgate 300w Amp
Haha the car isn't dented. Looks like it though doesn't it? Just a weird color/reflection/lighting /crappy cell phone camera effect. I would like to debadge the garnish but the scion emblem has two posts that keep it secured into the body. Ill most likely end up painting them a matte black.
__________________
2011 Scion tC, Cement, 6 spd manual, everything else is stock! for now.....
2008 Scion xB,Classic Silver Metallic,18x8 Motegi SP10,TRD Cold Air Intake,HKS Wagon Exhaust,Tinted Front Windows,Blacked Out Badges and Mirror Covers,Peeled A-Pillar Tape, Pioneer Headunit, Infinity 6.5" Speakers W/Component, Rockford Fosgate P1 sub, Rockford Fosgate 300w Amp
n00b here...is the debadging process a simple one?
its extremely easy. I used a hair dryer at about a 6-10 inch distance to heat up the adhesive. then u used the corner of a credit card to slowly peel the emblem away. if you want you can use some thicker gauge fishing line to sort of run along the back of the emblem. use some goo gone or dw40 to remove any residue left behind.
__________________
2011 Scion tC, Cement, 6 spd manual, everything else is stock! for now.....
2008 Scion xB,Classic Silver Metallic,18x8 Motegi SP10,TRD Cold Air Intake,HKS Wagon Exhaust,Tinted Front Windows,Blacked Out Badges and Mirror Covers,Peeled A-Pillar Tape, Pioneer Headunit, Infinity 6.5" Speakers W/Component, Rockford Fosgate P1 sub, Rockford Fosgate 300w Amp
its extremely easy. I used a hair dryer at about a 6-10 inch distance to heat up the adhesive. then u used the corner of a credit card to slowly peel the emblem away. if you want you can use some thicker gauge fishing line to sort of run along the back of the emblem. use some goo gone or dw40 to remove any residue left behind.
you can also use some windex, your finger and sacrifice having a sore finger to get off the residue lol. That was my method but it's all good cuz now i just type with out my index
haha everyone has a different place to put the tC badge. I haven't seen that one where you put the badge in the lower windshield or where the rear view mirror is. The most I've seen was in the grill area, and on the dash...
__________________ "Loosing 10lbs, is equivalent to adding 1 horsepower."
2011 Scion tC MGM 6 speed manual sold, with a few mods......
supa try puttin it ryt on top of the latch of the glove box i think it looks a lot better.. ill probly mine over ther since i have an extra one sitting around from my first gen tC..