FS: 05-06 TRD Supercharger w/auto fit kit =SOLD!=

[FenrirOne]

I bought this from Jasonrs2, and intended to put it in my tC, but have since gotten engaged and it's just sitting in my closet =(, and I need to sell this and save up some money. Also comes with the hard to find 06 Auto Fit Kit, and a set of 4 NGK Iridium BKR8EIX spark plugs, and the NST 9.5psi pulley and matching Gates belt. The kit has everything EXCEPT what Jasonrs2 had listed below: READ THESE IMPORTANT RULES BEFORE POSTING! - Please do not reply to a post unless you need more information. - If you think the price is too high or the product is not to your liking, please do not hassle the seller. - No Sale Jacking. Please start your own thread. Part: 2005-2006 Scion tC TRD Centrifugal Supercharger Kit Number: PTR41-21005 (DISCONTINUED) Description: TRD superchargers are belt driven from the crank, delivering more torque and horsepower from idle to redline. You get the power and torque of a larger displacement engine when you need it and the lighter weight and greater efficiency of a smaller engine when you don't. Condition: I removed this kit prior to selling my tC. The Supercharger Main Assembly only has 10 miles on it (literally had it replaced under warranty, driven home and removed). All parts are in good working condition. Redesigned Parts: The Supercharger Main Assembly is the last version before it was discontinued with the redesigned shaft housing and brackets. The Cast Aluminum Transmission Mount Bracket is also the stronger redesigned version. Missing Parts: I have seen too many kits sell here for a very low price to later have the buyer come back asking for help because every missing piece wasn't disclosed. I took inventory of ALL 84 parts TWICE so that you know exactly what you will need to have a complete kit. Below are the critical parts needed: - (3) Bolts, 3/8-16 UNC x 1”x 5/16 Allen WF [Harware Store] - (1) Bolt, Hi-Strength 12-Pt Crank Bolt w/captured washer 14 x 1.5 x 45 x 19WF [PTR41-21061] - (3) Bolts, SHCS 6 x 1.0 x 16 x 5 mm Allen WF [Hardware Store] - (3) Flat Washers, 6mm [Hardware Store] - (1) Hose, VSV vacuum 7mm x 12 mm x 250mm [PTR41-21058] - (1) Fuel Supply Line, TRD [PTR41-21162] - (4) Fuel Injectors, TRD [PTR41-21163] - (1) 71°C (160°F) Thermostat [PTR41-21161] * I am also missing little generic things like zip ties and wire loom, but they're more for organization and not required. I am taking offers at the moment, PM me if interested. I will take pics this week and post them here. Not looking to part out at the moment. Lowballers need not apply. Thanks! SOLD to a friend of mine.

[tc1234]

I am interested PMed

[Bdog4life]

Very interested... what are you looking to get out of it ? and do you know what the difference between the 06 s/c to the 07??

[feldy]

What do you want for this?

[xxTC1488xx]

interested..pm'ed

[tckid21]

Originally Posted by Bdog4life

Very interested... what are you looking to get out of it ? and do you know what the difference between the 06 s/c to the 07??

Difference im assuming is the MAF intake sensor... im pretty sure everything else is the same...

[tc1234]

I think the mounting bracket might be different between the 06 and 07. I think you can get them through toyota though.

[Vybby]

i might interest, can you post up the price...

[FenrirOne]

Taking offers at the moment. PM me with an offer. Thanks

[SuShIxFiSh]

would you take 2 pairs of rims ?

[xxTC1488xx]

U have another PM from me..let's get this done

[FenrirOne]

Originally Posted by xxTC1488xx

U have another PM from me..let's get this done

Sent you a text.

[FenrirOne]

Ok so I have a few serious buyers that ALL want me to hold it for them, so like all serious business deals, it is going to come down to who gets the money to me first. I will ship it out the next business day after it clears through Paypal or however. Thanks!

[FenrirOne]

Bump. Need this gone by the end of the week!

[feldy]

I asked days ago what the price is. you never once posted it. And there is no use sending a pm if you priced it to high. So again how much do you want for it.

[FenrirOne]

Originally Posted by FenrirOne

I bought this from Jasonrs2, and intended to put it in my tC, but have since gotten engaged and it's just sitting in my closet =(, and I need to sell this and save up some money. Also comes with the hard to find 06 Auto Fit Kit, and a set of 4 NGK Iridium BKR8EIX spark plugs. The kit has everything EXCEPT what Jasonrs2 had listed below:

READ THESE IMPORTANT RULES BEFORE POSTING!
- Please do not reply to a post unless you need more information.
- If you think the price is too high or the product is not to your liking, please do not hassle the seller.
- No Sale Jacking. Please start your own thread.

Part: 2005-2006 Scion tC TRD Centrifugal Supercharger Kit
Number: PTR41-21005 (DISCONTINUED)
Description: TRD superchargers are belt driven from the crank, delivering more torque and horsepower from idle to redline. You get the power and torque of a larger displacement engine when you need it and the lighter weight and greater efficiency of a smaller engine when you don't.

Condition: I removed this kit prior to selling my tC. The Supercharger Main Assembly only has 10 miles on it (literally had it replaced under warranty, driven home and removed). All parts are in good working condition.

Redesigned Parts: The Supercharger Main Assembly is the last version before it was discontinued with the redesigned shaft housing and brackets. The Cast Aluminum Transmission Mount Bracket is also the stronger redesigned version.

Missing Parts: I have seen too many kits sell here for a very low price to later have the buyer come back asking for help because every missing piece wasn't disclosed. I took inventory of ALL 84 parts TWICE so that you know exactly what you will need to have a complete kit. Below are the critical parts needed:
- (3) Bolts, 3/8-16 UNC x 1”x 5/16 Allen WF [Harware Store]
- (1) Bolt, Hi-Strength 12-Pt Crank Bolt w/captured washer 14 x 1.5 x 45 x 19WF [PTR41-21061]
- (3) Bolts, SHCS 6 x 1.0 x 16 x 5 mm Allen WF [Hardware Store]
- (3) Flat Washers, 6mm [Hardware Store]
- (1) Hose, VSV vacuum 7mm x 12 mm x 250mm [PTR41-21058]
- (1) Fuel Supply Line, TRD [PTR41-21162]
- (4) Fuel Injectors, TRD [PTR41-21163]
- (1) 71°C (160°F) Thermostat [PTR41-21161]
* I am also missing little generic things like zip ties and wire loom, but they're more for organization and not required.

I am taking offers at the moment, PM me if interested. I will take pics this week and post them here. Not looking to part out at the moment. Lowballers need not apply. Thanks!

EDIT: ALSO forgot to mention I am throwing in the NST s/c pulley and belt. They're brand new, and I totally forgot I bought them.

[FenrirOne]

Originally Posted by feldy

I asked days ago what the price is. you never once posted it. And there is no use sending a pm if you priced it to high. So again how much do you want for it.

The lowest I'll take is $1100 shipped. The same offer I gave the others. Don't bother trying to talk me down a dollar less a $1100, I'll ignore it. If there aren't any serious buyers by Thurs, I think I'm just going to keep it and install it. Thanks for your interest!

[feldy]

I don't see anything listed about the ecu? Do you have the flashed ecu? the Auto version of this needed to be flashed twice. Not sure if you can get toyota do the flash anymore. If you have the flashed ecu why dont you sit on this for another week so I can get my taxes done and see whats on the up and up. I was planing on getting new shocks but this might be more fun.

[FenrirOne]

I have 2x ecu actually, lol I've never used them so I don't know if they've been flashed.

[bosnik]

pics?