ScionLife.com

scionchicop · 07-15-2012, 07:27 PM

Here are some pics of the fenders by Seibon. They are 10mm wider at the fender well. Install was fairly easy. Removal of skirts is required and removal of bumper would have been a lot easier(didn't do that part). Most of the holes line up with the exception of the headlight square clip. I'm going to have to buy a screw with a bolt to make that work. I'll post a pic of that as well for those that buy these for reference. Also, modification of the black piece between hood and fender is a must as it does line up with holes on new fenders. I'll post a pic of that as well.
Here are pics of fenders installed.

Emo1127 · 07-15-2012, 11:46 PM

dang those look super nice and aggressive

GenomeTuning · 07-17-2012, 02:09 AM

1/3rd there to covering the entire car in carbon fiber. keep going :D

scionchicop · 07-17-2012, 02:14 AM

Quote:

Originally Posted by GenomeTuning

1/3rd there to covering the entire car in carbon fiber. keep going :D

True story, but i'm done with body mods. Doors, trunk and roof are all that I could purchase but i've met my goal with the CF stuff. Thanks for the suggestions though! Time will tell if i get bored of it and want to change it up some more.

SuBSiN · 07-17-2012, 05:56 PM

I'm highly interested in these, do u have a link? They look super nice imo

Sent from my HTC EVO 3D X515m using Tapatalk 2

scionchicop · 07-17-2012, 06:00 PM

Thanks. Here's a link to one of the sites you can purchase from.

http://www.fastscions.com/scion-tc2-...r-fenders.aspx

erixa88425 · 08-09-2012, 11:02 PM

Bump

scionchicop · 08-10-2012, 12:52 PM

^^^Why did you bump?

ralph9983 · 08-10-2012, 03:29 PM

digging it

ribjub · 08-14-2012, 01:25 PM

They look good, except for the fact that they're not colour-matched with the body... But that's the whole point of the carbon fiber

AZtC89 · 08-15-2012, 04:13 PM

Nice addition man! I have a slightly off-topic question for you Scionchicop. How's your experience with the hood been? I've been VERY interested in that hood but I'm concerned about rain and getting water through the louvers/vents and onto engine parts. The passenger side openings look like they're right over the belts. I've heard of Seibon making fiberglass covers that attach to the underside of the hood to cover the vents, but I've been told that they make them for ALL of their hoods, this style being one of them. I rarely rains in my area, but I don't want to take any chances.

**highvoltage1** · 08-19-2012, 03:15 AM

Gotta say I like the look! Also saw you new wheels in the other thread. Very nice looking 2nd gen ya got there!