The Exact Metric size and Pitch of the tC1 Tow Hook thread?
#1
Administrator
SL Member
Administrator
Thread Starter
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
The Exact Metric size and Pitch of the tC1 Tow Hook thread?
Does anyone Know the Exact Metric size and Pitch of the tC1 Tow Hook thread?
It is located behind the small round cover on the Front bumper, Driver's Side. If you have the Original Tow Hook, it should be under the cargo hatch
or you can measure the hole in the Front bumper behind the cover. It comes off with a small screwdriver.
TIA
MR_LUV
for example on my tC2.5=2014-2016, it's M24x2.0 (fine)
The front end was redesigned in 2014 and I think the Tow Hook thread size might be different
than a tC1=2005-2010 and/or tC2=2011=2013. There could even be 3 different sizes.
Does any one Know Exactly? I'm looking for Knowledge, not Guesses.
1. tC1=2005-2010= ?
2. tC2=2011-2013= ?
3. tC2.5=2014-2016= M24x2.0 (fine)
Last edited by MR_LUV; 02-17-2019 at 06:00 AM.
#2
Administrator
SL Member
Administrator
Thread Starter
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
Example Shown: Measurement of the tC2.5 Tow Hook
Now, Who can provide the Same Information on their tC1=(2005-2010)
and/or tC2=(2011-2013) Tow Hook?
I need the Exact Thread Size, Pitch, and Length.
Last edited by MR_LUV; 12-25-2017 at 09:04 PM.
#5
Administrator
SL Member
Administrator
Thread Starter
Join Date: Dec 2007
Location: State of Confusion: CA
Posts: 2,583
Thread
Thread Starter
Forum
Replies
Last Post
VINC3TC1
Scion tC 1G Suspension & Handling
5
12-30-2010 05:11 AM