ScionLife.com

Billsac · 06-10-2006, 09:46 PM

As everyone says. "Im looking to get a Scion tC." I wanted to know if the Scion logo in the rear is glued on, or bolted on. Because I think a white car with a black logo would like good. If it's glued on it will be a little more tricky. Like im pretty sure I cant use Elmers school glue to put it back on.

uchihathai · 06-10-2006, 10:08 PM

it is glued on.... if you wanted it black you could cover the rest of the car and paint it black with some resin paint.

Hyghgynx · 06-10-2006, 10:27 PM

Here's the skinny...

Rear "Scion" Emblem- Held into place with alignment pins and double-sided adhesive.
Rear "tC" Emblem- Held into place by adhesive only.
Front "Scion" Emblem- Held into place with alignment pins and adhesive.

All can be removed with the "tC" Emblem being the easiest. Heat up the emblems (with a hair dryer) and use either floss (YES! Floss!) or fishing wire. Use a sawing motion on the adhesive and cut away. Just be aware of the alignment pins. When re-applying, just use heavy duty automotive double-sided adhesive.

Use the SEARCH function to find a DIY on how to paint them.

Billsac · 06-10-2006, 10:48 PM

Thanks so much. But alighment pins? are they like plastic or metal. So when i do pull it off will their be 2 holes where the logo goes?

Somnambulated · 06-11-2006, 05:03 AM

It won't matter either way, because the rear logo is recessed into the body work. So if you full on shave the emblem, it will look like someone stole your emblem.