ScionLife.com

tCtCtC · 03-30-2007, 05:44 AM

OK I searched for about 2 hours now and I got nothing. My question is what toyota badge fits in the rear space where the scion emblem is?? Please, don't rant on the tC having a toyota badge.... I just need the rear because I'm going to get the toyota wording emblem and put it in the corner of my gille. Better yet what size will fill the front? I'll think about it but please provide me with that info.

Thanks
Andrew (I really didn't need to type that whole thing, but I'm bored...

)

**draxcaliber** · 03-30-2007, 05:53 AM

shoot...i now somebody did post a while ago asking that...well, i think he got like a corolla or camry trunk emblem to fit, or maybe it was an avalon. i guess take some measurements and see what size toyota emblem would fit.

or keep searching, i know that has been answered on here before, but i believe you when i say you searched and couldn't find it, that happens to me sometimes.

and no rant about the toyota ona a scion bit. i mean, all our engines covers have toyota emblems, you just got jdm fever don't you?

tCtCtC · 03-30-2007, 05:56 AM

thanks drax for the *info* lol and on the jdm thing...

**draxcaliber** · 03-30-2007, 06:00 AM

you should ask badseed305

he has one on his tc

http://www.scionlife.com/forums/view...ta+emblems+fit

tCtCtC · 03-30-2007, 06:09 AM

PM already sent.... I looked through his forums discussing it and he didnt state where he got it

foreverandaminute · 03-30-2007, 06:12 AM

Quote:

Originally Posted by draxcaliber

you should ask badseed305

he has one on his tc

http://www.scionlife.com/forums/view...ta+emblems+fit

NO. don't read that thread, someone said that the rear emblem was a front 03 celica emblem and i burned $20...

read this one, the one by badseed305 himself

http://www.scionlife.com/forums/view...t=badge+toyota

i found the part number in there, it's somewhere in there, but i wouldn't bet my life on it

**draxcaliber** · 03-30-2007, 06:15 AM

i'm not really sure what car its from, but the toyota part # is: 75404-AC010

so there you have it, i think that is the part you need!

foreverandaminute · 03-30-2007, 06:15 AM

Quote:

OK I searched for about 2 hours now and I got nothing.

haha, took me about a year...

tCtCtC · 03-30-2007, 06:21 AM

hmm he only gives part number... i wanna save some $$ on ebay

tCtCtC · 03-30-2007, 06:22 AM

Quote:

Originally Posted by RIPMKIV

Quote:

OK I searched for about 2 hours now and I got nothing.

haha, took me about a year...

i noticed in a thread u got one.... WHAT CAR IS IT!!!

tCtCtC · 03-30-2007, 06:31 AM

anyone kno??? please help!!!

tCtCtC · 03-30-2007, 06:37 AM

Ok, the front emblem is 41/2 inches wide and 3" tall... as for the back, well i dont kno...

foreverandaminute · 03-30-2007, 06:38 AM

Quote:

I'm going to get the toyota wording emblem and put it in the corner of my gille.

Now that's something that I would have to see to change my mind on the opinion that that will look weirder than not... Has there been a Toyota that the word "Toyota" on the front and off-center?

Quote:

i noticed in a thread u got one.... WHAT CAR IS IT!!!

lol, I bought it through part number, sorry!

xSTANDxSTRONGx · 03-30-2007, 06:42 AM

Quote:

Originally Posted by tCtCtC

Ok, the front emblem is 41/2 inches wide and 3" tall... as for the back, well i dont kno...

WHile I disagree with a JDM tC... Here is my advice: Don't forget to check the angle of the front badge, on the xA's there is about a 30*-40* angle the the supports come out of the back of the badge.

tCtCtC · 03-30-2007, 06:43 AM

no there hasnt.... and i thinky i found the fronty!!

http://cgi.ebay.com/ebaymotors/TOYOT...04981293QQrdZ1

tCtCtC · 03-30-2007, 06:44 AM

Quote:

Originally Posted by xSTANDxSTRONGx

Quote:

Originally Posted by tCtCtC

Ok, the front emblem is 41/2 inches wide and 3" tall... as for the back, well i dont kno...

WHile I disagree with a JDM tC... Here is my advice: Don't forget to check the angle of the front badge, on the xA's there is about a 30*-40* angle the the supports come out of the back of the badge.

thanks, but im just gonna cut off the prong thingy...

xSTANDxSTRONGx · 03-30-2007, 06:44 AM

Good to hear, Good luck on you search!

xSTANDxSTRONGx · 03-30-2007, 06:46 AM

Quote:

Originally Posted by tCtCtC

Quote:

Originally Posted by xSTANDxSTRONGx

Quote:

Originally Posted by tCtCtC

Ok, the front emblem is 41/2 inches wide and 3" tall... as for the back, well i dont kno...

WHile I disagree with a JDM tC... Here is my advice: Don't forget to check the angle of the front badge, on the xA's there is about a 30*-40* angle the the supports come out of the back of the badge.

thanks, but im just gonna cut off the prong thingy...

I meant a str8 swap from a Scion to Toyota badge, but since you're doing something different.....I really have no help for you...wish I did, Good luck again.

foreverandaminute · 03-30-2007, 06:46 AM

Quote:

Originally Posted by tCtCtC

anyone kno??? please help!!!

whoa, i was typing my response as you were posting this...

give questions at least half an hour, if not an entire day, like i do

...this isn't a chatroom, afterall.

tCtCtC · 03-30-2007, 06:46 AM

my bad!!! its 4 1/4" hehehe