AutoX Yesterday
#1
AutoX Yesterday
We had another autox yesterday that I was actually able to go to (it was event #4, but only my 2nd of the year). We had a total of 38 drivers running (about average for the location we had - not bad).
There were three of us in ST. The other two included a guy I regularly compete with (and am usually VERY close to in time) and another guy who was sharing his car. He has a Mazda Protoge 5 that is fairly well prepped. I have to ask him some day to figure out what exactly he's done... but it's decent.
Anyway... we got 8 runs in. The Protoge and I went back and forth for the morning set, I eventually was ahead with a 47.007 to his 47.583. In the second set of runs I finally managed to break the 47 second barrier - but hit a cone. Sooooo ____ed. But we were both stuck right around 47 seconds for a while.
My very last run, finally pulled it together for a 46.578... but the Protoge still had one run left - and I know he has the time in it. He ended up with a 46.....811. I edged him out on our last runs by 0.233 seconds. It was a blast.
I also was 2nd place in PAX for the day. Just barely beat out by a very good driver in a stock MR2 in ES.
Full Results: http://www.glen-scca.org/Solo/2010/Results20100627.asp
PAX Results: http://www.glen-scca.org/Solo/2010/PAX20100627.asp
And I have a ton of pics: http://ack.fm/a1lJga
There were three of us in ST. The other two included a guy I regularly compete with (and am usually VERY close to in time) and another guy who was sharing his car. He has a Mazda Protoge 5 that is fairly well prepped. I have to ask him some day to figure out what exactly he's done... but it's decent.
Anyway... we got 8 runs in. The Protoge and I went back and forth for the morning set, I eventually was ahead with a 47.007 to his 47.583. In the second set of runs I finally managed to break the 47 second barrier - but hit a cone. Sooooo ____ed. But we were both stuck right around 47 seconds for a while.
My very last run, finally pulled it together for a 46.578... but the Protoge still had one run left - and I know he has the time in it. He ended up with a 46.....811. I edged him out on our last runs by 0.233 seconds. It was a blast.
I also was 2nd place in PAX for the day. Just barely beat out by a very good driver in a stock MR2 in ES.
Full Results: http://www.glen-scca.org/Solo/2010/Results20100627.asp
PAX Results: http://www.glen-scca.org/Solo/2010/PAX20100627.asp
And I have a ton of pics: http://ack.fm/a1lJga
#3
Mostly just suspension. Struts, springs, sways, strut bars, front camber bolts...
Here, this is easier than me typing: https://www.scionlife.com/forums/gar...40-ack154.html
Here, this is easier than me typing: https://www.scionlife.com/forums/gar...40-ack154.html
#6
meh i just got a zpi kit gonna be getting it tuned on 8psi guy b4 me ran 11psi for 2 years no prob but i hear yah some people want the ease and smoothness of a stock turbo car
#10
#14
Chances are I might stay stock for a while... autox will be a factor (I've actually compared stock classes for each of the ones I'm looking at) but it won't be a huge one. I'd still be having fun anyway - just need to find the right car.
Thread
Thread Starter
Forum
Replies
Last Post
WRX1316_TcVicent
Scion tC 1G Drivetrain & Power
5
07-22-2021 06:06 PM